Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Santa Ana, CA
Gate installation in Santa Ana usually means replacing a decades-old wrought-iron driveway gate or adding an automated operator to an existing one, and the job here is shaped by two things: homes built between the 1910s and 1970s, and the dry, gusty Santa Ana winds that warped and rattled the original ironwork for years before you called us. Manor Gate Repair handles the full scope, from setting new posts in aging stucco or cracked concrete to wiring an operator that won’t quit during the first November wind event. If you need a straight answer on cost or timing, call (844) 703-6053 and we’ll give you one.
Why Santa Ana Homes Are Different
Santa Ana’s housing stock runs the whole timeline, from 1920s Spanish Colonial bungalows in the older core of 92701 and 92703 to mid-century stucco tract homes across 92704 through 92707, plus a growing number of ADUs tucked behind rear-alley gates. That matters because gate posts are almost always set into stucco-on-wood-frame or masonry walls, and after forty or fifty years of seasonal movement, the post base is frequently the real failure, not the gate leaf itself. We see it on nearly every retrofit: the hinge looked bent, but the post had shifted a quarter inch into cracked concrete.
The second local factor is the wind. The Santa Ana winds that gave the city its name funnel down the canyon corridors and slam older pedestrian and driveway gates against their stops, loosening hinge screws, stripping latch threads, and bending lightweight aluminum on corner-lot and alley-facing properties. In neighborhoods like Floral Park and Washington Square, where ornamental iron gates are original to the house, wind damage accumulates quietly until a gust finally drops the gate off its top hinge. Then there’s the dry-summer, wet-winter cycle: long dry heat bakes wooden gates and dries out hinge lubrication by August, and the first winter rain rusts untreated iron and swells whatever wood is left by February. It’s a predictable rhythm, and we schedule around it.
Styles & brands we work with
Our Main Santa Ana Services
Santa Ana homeowners call us most often for two things: a gate that no longer opens or latches, and an electric operator that stopped responding. Here’s how each one plays out in this city.
Gate Repair in Santa Ana
Most gate repair calls in Santa Ana start as a sagging leaf or a latch that won’t catch, but the underlying cause is usually the post or the hinge hardware rather than the gate itself. We work on ornamental steel, wrought iron, wood, and aluminum gates, and we regularly retrofit self-closing hinges and hold-open hardware onto gates that were installed before those were required. For the full breakdown of what we fix and what it costs here, see Gate Repair in Santa Ana.
Electric Gate Repair in Santa Ana
Electric gate repair in Santa Ana means diagnosing the control board, operator, safety sensors, or wiring on systems that often date back to the original install, and many of them weren’t grounded or weather-sealed the way current code requires. We service LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we won’t tell you to rip out a perfectly good operator just because we don’t carry that brand. For a deeper look at our diagnostic work, see Electric Gate Repair in Santa Ana.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Santa Ana
Gate installation in Santa Ana is often a replacement job on a home where the original gate went in fifty years ago and was never upgraded for modern hardware, let alone automation. The climate works against untreated steel and unsealed wood here, and the older housing stock means we’re frequently setting new posts into stucco or concrete that has to be cut out and re-poured before the gate goes up. Whether it’s a new driveway gate on a corner lot or a rear-alley gate for an ADU, we handle the full scope. Learn more about our Gate Installation work.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand every day, or you already have an operator that fails intermittently and you’d rather start fresh than patch a fifteen-year-old control board.
What it costs in Santa Ana
Automatic gate installation in Santa Ana typically runs $1,500 to $5,500 depending on operator type, gate weight, and whether we’re running new conduit from the house.
How we do it
We survey the gate weight and post condition, set or reinforce the posts, mount the operator to match your existing brand or a new one, and run the low-voltage power and safety sensor wiring before testing the full cycle repeatedly.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the hinge stiles, the post has shifted out of plumb, or the old gate doesn’t meet the height and latch requirements your HOA or insurer now expects.
What it costs in Santa Ana
Driveway gate installation in Santa Ana lands between $900 and $3,500 for a standard single-leaf steel or aluminum gate, with ornamental iron and custom widths pushing the number higher.
How we do it
We measure the opening and post spacing, fabricate or order the gate to the correct swing or slide configuration, set new posts if needed, and hang the gate with hardware matched to the gate’s weight rather than whatever came off the old one.
Sliding Gate Installation
Signs you need it
Your driveway slopes up toward the street or the property line is too tight for a swing gate to open without blocking the sidewalk or the alley.
What it costs in Santa Ana
Sliding gate installation in Santa Ana typically ranges from $1,800 to $4,800 including the track, the gate panel, and the operator if you want automation from day one.
How we do it
We set the steel track and roller system on a level concrete base, hang the gate panel with the proper cantilever or track roller setup, and install the operator and safety photo eyes at the correct height for code compliance.
What Gate Installation Costs in Santa Ana
| Item | Typical range in Santa Ana |
|---|---|
| Automatic gate installation | $1,500 – $5,500 |
| Driveway gate installation | $900 – $3,500 |
| Sliding gate installation | $1,800 – $4,800 |
How long does a gate installation take in Santa Ana?
Most standard swing or sliding gate installations take one to two days on site, provided the posts are sound and we’re not re-pouring concrete. Custom ornamental iron gates add fabrication lead time, which we quote before you commit.
Do I need a permit to replace a gate in Santa Ana?
Straight gate replacement on existing posts typically doesn’t require a permit in Santa Ana, but new posts, footings, or electrical runs for an operator may. We check the current city requirements for your specific project and handle the paperwork when it’s needed.
Brands We Service in Santa Ana
We work on the brand you already have. In Santa Ana that most often means Viking and Ghost Controls for residential driveway operators, DoorKing for light-commercial and multi-unit gates, and Elite for slide-gate systems. We keep common boards, remotes, and safety sensors in local stock, which cuts turnaround on repairs. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Santa Ana, CA
| Service | Typical range in Santa Ana |
|---|---|
| Automatic gate installation | $1,500 – $5,500 |
| Driveway gate installation | $900 – $3,500 |
| Sliding gate installation | $1,800 – $4,800 |
| Electric gate installation | $1,800 – $5,000 |
| Gate opener installation | $1,500 – $5,500 |
| Gate operator installation | $1,500 – $5,500 |
| Swing gate installation | $1,000 – $4,000 |
| Gate opener repair | $120 – $500 |
| Gate operator repair | $120 – $500 |
| Gate track repair | $150 – $500 |
| Gate wheel replacement | $75 – $250 |
| Gate hinge repair | $100 – $400 |
In Santa Ana, the two biggest price movers are post condition and automation. A gate that needs new posts set in re-poured concrete costs meaningfully more than one we can hang on existing posts, and adding an operator with a full safety-sensor package adds to both material and labor. Every quote is given up front and agreed before any work starts, so the number we give you is the number you pay.
Neighborhoods We Serve in Santa Ana
We cover the full city, and most of our Santa Ana jobs are in the older single-family neighborhoods where ornamental iron and custom driveway gates are most common. We typically reach most parts of the city within a day or two for scheduled work, and sooner for urgent gate failures.
- Floral Park
- Washington Square
- French Park
- West Floral Park
- Park Santiago
Service Area – Cities Near Santa Ana
Beyond Santa Ana, we handle gate projects in the surrounding Orange County cities, including Tustin, CA and North Tustin, CA to the east, Fountain Valley, CA to the southwest, and Orange, CA to the northeast. If you’re near the border of any of these, call us and we’ll confirm coverage for your street.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Santa Ana
For a gate that’s stuck open, stuck closed, or posing a safety hazard, we prioritize Santa Ana calls and can usually reach most of the city within a day. Urgent no-power or damaged-gate situations get dispatched first, so call us directly and we’ll confirm the next available slot.
Yes. Many Santa Ana neighborhoods, especially the historic districts like Floral Park, have design-review or HOA requirements for gate style, height, and finish. We supply the specs and drawings those boards ask for, and we wait for approval before ordering anything custom.
Can you work on gates at rental properties and small apartment buildings in Santa Ana?
We do, and a large share of our Santa Ana work is on multi-unit and tenant-used gates where the latch, self-closer, and access control have to hold up to daily use by multiple people. We quote those jobs with commercial-grade hardware where it’s needed.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Ana Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Megan Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniel Thompson