Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pedley, CA
Gate installation in Pedley usually means a driveway-wide, vehicle-rated system: wrought iron on masonry columns, automatic slide operators on gravel beds, or a heavy swing gate on a sloped frontage. The work here skews toward long property-line and equipment-access gates built for trucks, trailers, and horses, not the short pedestrian yard gates common in denser Riverside subdivisions. We handle the full process from measurement and layout through concrete pads, operator wiring, and final travel-limit tuning. Manor Gate Repair has served Pedley since 2014, and we work on the brand you already have. Call (844) 703-6053 for a free measure and a written price.
Why Pedley Homes Are Different
Pedley sits at the eastern edge of Jurupa Valley along the Santa Ana River bottom. The lot pattern here is wide and semi-rural: oversized parcels, long drives, gravel or dirt frontage, block-and-stucco walls, and a working footprint that includes horse trailers, flatbeds, and equipment access. The typical gate is not a five-foot garden gate. It is a fourteen-to-eighteen-foot slide or swing on a track or bearing hinge, usually automated, and usually carrying real weight. That changes the nature of almost every job. A sagging weld on a standard pedestrian gate is a nuisance. On a Pedley property-line gate, the same sag binds the track, stalls the operator, and takes the whole driveway out of service.
The climate adds a second layer. The Santa Ana corridor pushes hot, dry, dust-laden air through the river bottom for months at a time. Wood dries and warps. Control boards bake inside their enclosures. Hinges and rollers grind with windblown grit. Then winter rain swells the wood and exposes rust on older steel. Most gates here need seasonal hardware lubrication and operator maintenance as a matter of course, not as an occasional repair item. Because many parcels slope toward the river bottom, heavy slide and swing gates ride on tracks that settle and lose level. The gate drifts, the limit switches mis-read, and the operator stalls. We see that failure mode in Pedley far more than we do on flat, paved suburban lots in Riverside or northern Jurupa Valley.
Styles & brands we work with
Our Main Pedley Services
Two calls dominate our Pedley schedule: mechanical repairs to heavy gates that have stopped moving properly, and electrical repairs to operators, control boards, and safety sensors. Here is what each involves.
Gate Repair in Pedley
Most Pedley repair calls involve a gate that has come off its track, a hinge set that has sagged from bearing weight, or a weld that has fatigued after years of wind loading and vehicle traffic. We rebuild the failing point rather than paper over it. That means re-setting posts on wide, sloped lots where the ground has shifted, re-aligning tracks on gravel beds, and replacing only the hinge or roller components that are actually worn. On older wrought-iron gates, we match the repair to the existing steel so the fix does not read as a patch. For the full scope of what we handle, see Gate Repair in Pedley.
Electric Gate Repair in Pedley
Electric gate repair is the more technically demanding side of Pedley work. Dust and heat shorten the life of control boards. Intermittent limit-switch faults, sensor misalignment, and operator burnout are common here, especially on gates that cycle daily for multiple vehicles. We diagnose the actual fault regardless of manufacturer, replace the failed component, and re-tune travel limits and safety edges to the gate’s actual weight and track condition. We do not push a full-system replacement when a board or sensor is the real issue. See Electric Gate Repair in Pedley for the detailed scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pedley
Gate installation in Pedley means building for a wide, often sloped, frequently gravel-fronted property where the gate must hold up to daily truck and trailer traffic. We measure the driveway width, slope, and set-back; choose the right gate style and operator; pour concrete pads where the track or hinges will sit; set posts in concrete; hang and balance the gate; then wire the operator, safety edges, and any keypad or intercom. Because the river-bottom soil shifts and dries unevenly, we set posts and operator pads deeper than a standard flat-lot job requires. From diagnosis to installation, we plan the work so the gate stays level across seasonal ground movement. For more on the service, see Gate Installation.
Automatic Gate Installation
Signs you need it
You are opening and closing a heavy gate by hand multiple times a day, or you want controlled access for a long driveway without leaving your vehicle.
What it costs in Pedley
Automatic gate installation in Pedley typically runs $7,200 – $14,800 including the gate, operator, safety edges, and basic electrical run.
How we do it
We measure the driveway width and slope, set the gate posts and operator pad, hang and balance the gate, then wire the operator, safety loops, and keypad or intercom.
Gate Installation Services
Signs you need it
You have no gate currently but need to secure a wide driveway or side access, or the existing gate is too light for daily truck and trailer use.
What it costs in Pedley
Basic gate installation services in Pedley start around $3,200 for a chain-link or light steel swing gate on posts, with automatic systems running $7,200 – $14,800.
How we do it
We survey the site, order the gate to your driveway’s exact width and load requirement, set posts and pads, then mount, balance, and operate the gate to spec.
Electric Gate Installation
Signs you need it
You have a manual gate on a long Pedley driveway and want keypad, intercom, or remote-controlled access without leaving the car.
What it costs in Pedley
Electric gate installation in Pedley typically falls between $7,200 and $14,800 depending on gate width, weight, and operator class.
How we do it
We mount the operator to a concrete pad, run the electrical feed and low-voltage control wiring, install safety edges and loops, and tune travel limits for the gate’s actual weight.
Driveway Gate Installation
Signs you need it
Your Pedley driveway opening is wider than standard, sloped, or gravel-fronted, and you need a gate that clears trucks and trailers without binding on the ground.
What it costs in Pedley
Driveway gate installation in Pedley typically ranges $3,200 – $14,800 depending on gate type, driveway width, and whether you are adding automation.
How we do it
We measure the opening and slope, set posts or an operator pad below the frost and settlement line, then hang or track the gate and fine-tune travel and safety stops.
Sliding Gate Installation
Signs you need it
Your Pedley property has a wide frontage or a steep approach where a swing gate would strike vehicles or the ground, so a slide gate is the only practical option.
What it costs in Pedley
Sliding gate installation in Pedley typically runs $7,200 – $14,800 with the track, operator, and safety edges included.
How we do it
We lay a level track on a poured concrete bed, set the operator and end stops, hang the gate, and tune the motor so the gate travels smoothly without stalling at the limits.
What Gate Installation Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Basic gate installation (posts, hinges, gate) | $3,200 – $5,800 |
| Automatic gate installation (gate + operator + safety edges) | $7,200 – $14,800 |
| Sliding gate installation (track, operator, gate) | $7,200 – $14,800 |
Do I need a permit to install a gate in Pedley?
Most gate installations in Pedley do not need a permit when the gate is on existing private property, but electric operator work should meet current electrical code. Check with the Jurupa Valley building department before any run from the panel to a new operator.
Can you install a gate on a sloped Pedley driveway?
Yes. The slope dictates whether we use a slide gate, a swing gate with raised bottom clearance, or a stepped gate leaf. We measure grade before recommending a design so the gate clears the ground at both ends of travel.
Brands We Service in Pedley
Manor Gate Repair carries parts and service familiarity for DoorKing, Elite, Mighty Mule, and LiftMaster operators, plus six more major gate automation brands. We stock common control boards, limit switches, and remotes for these systems locally, which keeps most Pedley repairs to a single visit. See our brands for the full list and what we typically keep on the truck.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pedley, CA
| Service | Typical range in Pedley |
|---|---|
| Gate repair (general mechanical) | $180 – $450 |
| Automatic gate opener repair | $250 – $650 |
| Gate operator replacement | $850 – $2,800 |
| Control board replacement | $350 – $900 |
| Safety sensor or photo-eye repair | $180 – $380 |
| Track and roller repair or replacement | $250 – $700 |
| Hinge and weld repair | $180 – $520 |
| Gate opener remote or keypad programming | $110 – $260 |
| Basic gate installation | $3,200 – $5,800 |
| Automatic gate installation | $7,200 – $14,800 |
| Sliding gate installation | $7,200 – $14,800 |
Prices in Pedley tend to run higher on wide, sloped, or gravel-fronted lots because the posts need deeper concrete and the gate may need more steel to bridge a long opening. The price we quote is the price you pay before we start; we agree on the number before any work begins.
Neighborhoods We Serve in Pedley
We cover the full Pedley area, including the semi-rural parcels along the Santa Ana River bottom and the equestrian and oversized-lot streets east of the Jurupa Valley edge. Most calls are reachable within the same day for urgent gate failures, and within a few days for scheduled installations or operator replacements.
- Pedley river-bottom equestrian parcels
- Jurupa Valley eastern edge lots
- Long-drive manufactured home properties
- Rural-residential blocks along the river corridor
- Wide frontage lots with equipment access
Service Area – Cities Near Pedley
From our Pedley service area, we also cover the surrounding Jurupa Valley and Riverside-area communities. We regularly work in Glen Avon, CA, Sunnyslope, CA, Rubidoux, CA, and Riverside, CA for the same gate repair, electric gate repair, and installation work we handle here.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pedley
For a gate stuck open, a failed operator, or a safety sensor fault, we can usually reach most Pedley addresses the same day. If the gate is stuck closed and blocking the only vehicle access, tell us when you call and we will prioritize the visit.
Some Pedley properties fall under HOA or county easement rules that limit gate height, setback, or driveway widening. We work from your HOA or county requirements and can build the gate to the allowed height, material, and automation type.
Yes. We cover all Pedley properties in the 92509 zip code, including the river-bottom parcels, the equestrian streets, and the manufactured-home lots. Call (844) 703-6053 to confirm your street and set up a free estimate.
Call Manor Gate Repair at (844) 703-6053 for a free estimate on gate installation, gate repair, or electric gate repair in Pedley. The quote is free, the price is agreed before work starts, and we work on the brand you already have.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pedley Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Megan Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniel Thompson