Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Gate installation in Fontana is shaped by two very different property types: the 1950s-to-1970s stucco tract homes across South Fontana, where original chain-link and wrought-iron gates have reached the end of their service life, and the newer subdivisions north of the 210 that still have room for a proper driveway gate and operator. We’re Manor Gate Repair, a brand-agnostic automated gate specialist, and we’ve served Fontana since 2014. From diagnosis to installation, we work on the brand you already have, and we quote every project before any work starts. Call (844) 703-6053 for a free measure and written price.
Why Fontana Homes Are Different
Fontana’s identity as a former steel-mill town turned Inland Empire logistics hub means most gate work calls on two very different skill sets. In the older South Fontana neighborhoods, original chain-link and wrought-iron gates from the 1950s and 60s often have hinges rusted solid from decades of Inland Empire heat and dust, so technicians frequently find themselves cutting and re-welding rather than just adjusting – a call type you don’t see in newer inland subdivisions. Meanwhile, properties along the I-10 and 210 corridors include commercial and industrial yards whose large cantilever and slide gates take heavy daily abuse from truck traffic.
The climate does its own damage. Hot, dry summers and frequent Santa Ana winds blow dust and grit into gate tracks and rollers, accelerating wear and causing binding on even well-maintained systems. Intense sun degrades lubricants and automatic gate sensors. Then winter rains arrive and expose every bit of rust and misalignment the dry months hid. For a new installation, that means we spec powder-coated steel, sealed bearings, and operators rated for continuous sun exposure. For existing gates, it means the fault is usually mechanical wear, not the operator itself – and the right fix, not the easy upsell, usually keeps the gate you already own running for years.
Styles & brands we work with
Our Main Fontana Services
Fontana homeowners and property managers call us about two things most often, and both are covered by our specialist team.
Gate Repair in Fontana
The biggest repair call we get in Fontana is a gate that has started to sag, bind, or refuse to close cleanly. In South Fontana, that usually means a rusted hinge post on an original 1960s gate; in the north, it’s more often a wheel or roller that has picked up grit and seized. Our team handles both, plus slide-gate track repair on commercial properties near the freeway corridors. We diagnose first, show you the fault, and quote before we touch a tool. Gate Repair in Fontana
Electric Gate Repair in Fontana
When an automated gate stops responding to the remote, the keypad, or the loop detector, the problem is rarely the motor alone. Dust-blocked photo-eyes, heat-degraded limit switches, and misaligned safety edges are the usual culprits in Fontana’s climate. Our electric gate team works on control boards, operators, and sensors across nine major brands, including LiftMaster, DoorKing, and Mighty Mule. We diagnose the actual fault, not a sales pitch for a full replacement. Electric Gate Repair in Fontana
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fontana
New gate installation in Fontana is a chance to build for the climate from day one. A gate spec’d for Fontana’s sun, dust, and Santa Ana winds – powder-coated steel, sealed bearings, an operator rated for continuous heat – will outlast anything bolted together with generic hardware store parts. Gate Installation here is design, fabrication or product selection, operator choice, and a level concrete pad or steel-post footing that will not shift in the dry, hard Fontana soil.
Driveway Gate Installation
Signs you need it
Your current gate has rusted hinges, sags more than an inch at the latch side, or the posts have shifted enough that the gate no longer lines up properly.
What it costs in Fontana
A single-swing driveway gate installed in Fontana typically runs $1,800 to $4,500 depending on width, material, and whether you’re adding an operator.
How we do it
We measure the driveway opening, check the hinge-post footings, spec a rust-resistant steel or aluminum gate, and set posts in concrete before hanging and aligning the gate to close square.
Sliding Gate Installation
Signs you need it
Your property has a wide driveway, a steep or sloped approach, or you’d rather not give swing clearance over the sidewalk or landscape beds.
What it costs in Fontana
A slide gate with track and operator in Fontana typically starts around $3,200 and runs to $7,500 for wider commercial or heavy-duty residential work.
How we do it
We lay a level track base, set the cantilever or tracked frame, mount the gate, and install and program the operator with safety sensors and a manual release.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Basic single-swing driveway gate, installed | $1,800 – $4,500 |
| Sliding gate with track and operator | $3,200 – $7,500 |
| Automated gate with new operator, keypad, and photo-eyes | $2,200 – $5,800 |
Prices in Fontana climb with wider openings, heavier steel, slide-track grading on sloped lots, and the cost of running power out to the gate line. Every quote is written up and agreed before work begins.
Do I need a permit for a gate installation in Fontana?
Most residential driveway gates in Fontana do not require a permit, but some HOAs and commercial properties do. We check requirements for your specific street and provide what the city or your association asks for. Call (844) 703-6053 and we’ll verify before you commit.
How long does a new gate install take in Fontana?
Most residential driveway gate installations take one to two days after the concrete has cured, which usually means a week from measure to completion. Slide gates on long commercial runs can add a day for grading and track work. We’ll give you a schedule in writing with your quote.
Brands We Service in Fontana
We service nine major gate automation brands, including DoorKing, Elite, Mighty Mule, and LiftMaster. We keep common control boards, remotes, photo-eyes, and limit switches in local stock to shorten turnaround on Fontana repair calls. Our brands page lists the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Gate repair, basic (hinges, latch, realignment) | $180 – $340 |
| Electric gate diagnosis | $95 – $225 |
| Control board replacement | $450 – $1,300 |
| Operator replacement | $900 – $2,800 |
| Photo-eye or safety sensor replacement | $190 – $475 |
| Slide gate roller replacement | $220 – $600 |
| Driveway gate installation, single-swing | $1,800 – $4,500 |
| Sliding gate installation | $3,200 – $7,500 |
| Automated gate package (operator, keypad, photo-eyes) | $2,200 – $5,800 |
In Fontana, the two biggest price drivers are rust damage on older South Fontana gates – welded-in hinge replacements cost more than an adjustment – and long power runs for gates set back from the house or building. Whatever the job, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Fontana
We work across Fontana, from the older 1950s and 60s stucco tract streets of South Fontana to the newer subdivisions north of the 210 and the commercial and industrial yards along the I-10 and 210 corridors. Our response time for most repair calls is same-day or next-day.
- South Fontana
- North Fontana
- Downtown Fontana
- Sierra Lakes
- Walnut Village
Service Area – Cities Near Fontana
Manor Gate Repair serves Fontana and the surrounding Inland Empire communities. We regularly travel out to Bloomington, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA for gate repair, electric gate work, and new installation. If your property is on the edge of Fontana, call (844) 703-6053 and we’ll confirm coverage for your street.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
Most residential repair calls in Fontana are scheduled same-day or next business day. Commercial slide-gate calls near the I-10 and 210 corridors are often same-day, since a gate stuck open is a security and liability issue. Call (844) 703-6053 and we’ll give you a straight answer on timing.
Many newer North Fontana subdivisions do have design rules for gate height, material, and color, and some require board approval before installation. We’re used to working from HOA spec sheets and can help you prepare what the board needs. Bring us the rules and we’ll spec the gate to match.
Yes. We install the gate, the operator, the keypad or intercom, the photo-eyes and safety edges, and the low-voltage run to the operator. For a new 120V circuit from the panel, we work with a licensed electrician and coordinate the schedule so the whole install lands on time.
Call Manor Gate Repair at (844) 703-6053 for a free estimate on gate installation, repair, or electric gate work in Fontana. Written quotes, upfront pricing, and no work starts until you approve the number.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniel Thompson"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Carrie Hoffman