Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Stanton, CA
Gate installation in Stanton runs $1,200 to $8,500 for most residential projects, with automatic driveway gates landing between $3,500 and $7,500 depending on the operator, materials, and access work. Most homes here are mid-century tract houses and mobile-home parks on narrow, densely packed lots, so nearly every installation involves working around tight setbacks, aging posts, and property lines that are shared with a neighbor. If you’re planning a new gate or replacing one that’s failed, call Manor Gate Repair at (844) 703-6053 and we’ll measure it, price it, and install it to spec.
Why Stanton Homes Are Different
Stanton is one of Orange County’s smallest, most densely packed cities, barely 3 square miles of mostly older single-family homes and small apartment or mobile-home parks. Gate repair here is overwhelmingly driveways and side-yard access gates on tight lots where a hinge or latch failure means a car is trapped, and jobs are usually squeezed between dense neighboring properties. Because so much of Stanton is renter-occupied and landlord-managed older housing, gate calls often come from property owners and park managers handling repeated repairs rather than one-time upgrades.
The housing stock shapes the work too. Stanton’s homes are dominated by mid-century tract homes and small stucco bungalows from the 1950s through 1970s, plus numerous mobile-home and apartment communities. Most gates are older wood or wrought-iron driveway and side-yard gates mounted on aging posts set in original concrete. That concrete is often cracked, the posts have shifted over decades, and the gate itself has weathered years of coastal-adjacent sun. Coastal-adjacent Southern California sun and dry summers bake and warp wood gates and dry out hinges, while occasional winter rain drives rust at hinge plates and latch hardware on iron gates. It’s a mild climate that fails gates slowly through sun and moisture cycling rather than through freezing.
There’s another distinctive Stanton condition we see regularly. In the dense mobile-home and apartment parks around 90680, gate hardware is often shared between neighbors’ units and mounted to posts that double as property lines. A sagging or misaligned gate frequently becomes a boundary dispute as much as a repair call. We’re used to working those situations, keeping the repair scoped to the hardware and the hinge geometry rather than getting pulled into a neighbor disagreement.
Styles & brands we work with
Our Main Stanton Services
Two services account for the vast majority of calls we take from Stanton homeowners and property managers: mechanical gate repair and electric gate repair. Both are covered below with dedicated Stanton pages for the details.
Gate Repair in Stanton
Most Stanton gate failures are mechanical: a hinge that’s pulled out of a weathered post, a latch that no longer catches, a gate that drags across concrete because the post has tilted. These are jobs we do constantly across the 90680 ZIP code, and the dense lots here mean a stuck gate is a real problem because the car is usually boxed in by a fence, a neighbor’s wall, or the house itself. We carry heavy-duty hinges, latch hardware, steel post sleeves, and the tools to reset or reinforce original concrete posts without tearing up the driveway more than necessary. Read the full scope on the Gate Repair in Stanton page, which covers our repair process, local pricing, and what to check before calling.
Electric Gate Repair in Stanton
Electric gate failures in Stanton are common in the apartment and mobile-home parks, where gates cycle dozens of times a day and operators wear out faster than they would on a single-family driveway. We diagnose control boards, arm operators, safety sensors, keypads, and loop detectors on every major brand, including DoorKing, Elite, and LiftMaster systems that are common in Orange County. If the gate opens partway, reverses, beeps without moving, or trips the breaker, it’s usually a sensor, a limit switch, or a board fault rather than a full operator failure. See the Electric Gate Repair in Stanton page for the full diagnostic and repair detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Stanton
New gate installation in Stanton usually means replacing a warped or rusted gate on an existing driveway opening, often on a mid-century tract home or a mobile-home park lot where the posts are original and the concrete is cracked. The climate here is mild but unforgiving to wood and uncoated steel: sun dries and warps boards, winter rain rusts iron at the hinges and latch plates. A new gate has to be built or selected for that specific wear pattern, then hung square on posts that may need sleeving or resetting before the gate ever swings. For the full installation scope, see our dedicated Gate Installation service page.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every day, or the existing operator is dead and repair parts are no longer cost-effective.
What it costs in Stanton
Automatic gate installation in Stanton typically runs $3,500 to $7,500 for a single driveway gate with operator, remote controls, and safety sensors.
How we do it
We measure the opening and weight of the gate, select an operator matched to the load and cycle frequency, then mount and wire the unit, set limit switches and force settings, and pair remotes and keypads.
Driveway Gate Installation
Signs you need it
The existing driveway gate is sagging beyond repair, rusted through at the frame, or the owner wants a wider opening that the current posts can’t support.
What it costs in Stanton
Driveway gate installation in Stanton typically runs $1,800 to $5,000 for a swing gate on existing posts, or $3,000 to $7,000 when posts must be set or replaced.
How we do it
We level and anchor the posts, hang the gate on adjustable hinges for future tuning, and set the swing arc and latch height so the gate clears the ground and the car.
What Gate Installation Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Single swing gate on existing posts | $1,200 – $2,800 |
| Driveway gate with new posts set in concrete | $3,000 – $5,000 |
| Automatic driveway gate with operator and remotes | $3,500 – $7,500 |
How long does gate installation take in Stanton?
A typical Stanton gate installation takes one day for a swing gate on solid posts, and two days when posts are set in fresh concrete or an automatic operator needs wiring from the house. We bring the material cut and welded to size before we arrive, so the on-site work is assembly, anchoring, and tuning rather than fabrication.
Do you handle the electrical and safety sensors on a new automatic gate?
Yes. We run the power, mount the operator, install photo-eye safety sensors and edge protection, and set the force and travel limits so the gate stops safely. Everything is quoted before work starts.
Brands We Service in Stanton
Manor Gate Repair is certified familiar with nine major gate automation brands, and in Stanton we most often see DoorKing, Elite, Mighty Mule, and LiftMaster systems on older tract homes and park properties. We stock common boards, sensors, and remote controls for those brands locally, which cuts most Stanton repairs to a single visit. Read more on our brands page for the complete list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Stanton, CA
| Service | Typical range in Stanton |
|---|---|
| Gate repair | $125 – $475 |
| Electric gate repair | $150 – $750 |
| Gate installation | $1,200 – $8,500 |
| Automatic gate installation | $3,500 – $7,500 |
| Driveway gate installation | $1,800 – $5,000 |
| Sliding gate installation | $2,500 – $6,500 |
| Hinge replacement | $90 – $220 |
| Gate post repair or reset | $300 – $850 |
| Latch or lock replacement | $70 – $180 |
| Operator replacement | $850 – $1,700 |
| Control board repair | $250 – $600 |
| Sensor or safety-edge repair | $110 – $280 |
What pushes a Stanton job higher is tight access and post condition: lots here are narrow, so we often can’t get equipment to the gate line without hand-carrying material, and a post that’s rotted or cracked below grade adds reset time. Whatever the final figure, you’ll see it in writing and approve it before we start any work. No surprise invoices.
Neighborhoods We Serve in Stanton
Manor Gate Repair covers all of Stanton, including the older tract blocks, the mobile-home and apartment communities, and the commercial strip lots along Beach Boulevard and Katella Avenue. Most of our Stanton calls come from the residential streets between Cerritos Avenue and Orangewood Avenue, but we take jobs across the entire 90680 ZIP code. Typical response time for the Stanton area is same-day for mechanical issues and next-day for parts-dependent electric repairs.
- Stanton Tract Homes
- Stanton Mobile Home Parks
- Apartment Communities off Beach Boulevard
- Katella Avenue Commercial Frontage
- Cerritos Avenue Residential Corridor
Service Area – Cities Near Stanton
From our base in Fontana, we run regular routes through northwest Orange County, so Stanton jobs are scheduled alongside nearby cities without a long dispatch delay. We serve Garden Grove, CA, Cypress, CA, and Westminster, CA on the same routes. We also cover Midway City, CA for smaller, closely packed lots that share a lot of the same gate failure patterns as Stanton.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Stanton
Most Stanton calls are scheduled same-day or next-day. Mechanical failures like a dropped hinge or a stuck latch are the fastest to turn around, while electric repairs that need a specific control board or sensor may take an extra day for the part to arrive. Call (844) 703-6053 and tell us the symptoms and we’ll give you an honest window.
For most single-family repairs and replacements, no. Stanton’s permit trigger is usually electrical work for a new automatic operator or any gate that changes the driveway approach from the public right-of-way. We flag that before quoting so there are no surprises with the city.
Yes, and that’s a regular part of our Stanton work. We quote per gate, schedule park visits to knock out several repairs in one trip, and keep a record of what each gate needs so future failures are faster to diagnose. Property managers call us directly, and we bill per the agreed quote.
If your gate is stuck, sagging, rusted through, or dead at the keypad, call (844) 703-6053 for a free estimate. Manor Gate Repair has served Stanton since 2014, and we work on the brand you already have.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Stanton Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Carrie Hoffman"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller