Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Westminster, CA
Full gate installation in Westminster, CA typically runs from $1,800 for a basic single-swing driveway gate up to $12,000+ for a custom automated sliding gate with access controls. Manor Gate Repair has served Westminster since 2014, and we handle the complete job: permits, footings, steel fabrication or pre-fabricated kits, operator mounting, safety edges, and final programming. The housing stock here – 1950s to 1970s tract homes with original fencing – means most installations involve retrofitting an automated gate onto an existing driveway rather than starting from bare land. Call (844) 703-6053 for a free measure and a written price before any work begins.
Why Westminster Homes Are Different
Westminster gates carry a different set of demands than what you’ll find in most of Orange County. The city’s 92683, 92684, and 92685 ZIP codes are dominated by single-story homes built between the 1950s and 1970s, many of which still have their original wrought-iron or chain-link fencing. Those older gates are light, often rusted at the hinge points, and were never engineered to carry an automatic opener. When we install a new gate in Westminster, we’re frequently removing a hand-welded iron gate that has sagged on its posts for three decades, then pouring new footings that can hold the weight of a properly reinforced automated gate.
Then there’s the Little Saigon dynamic. A large share of Westminster homes and storefronts use the gate as primary access control for extended families or home-based businesses. That means the gate gets cycled ten or twenty times more than a typical residential gate, and the install has to account for that duty cycle from day one. Marine air from the coast and occasional Santa Ana wind gusts also factor in: we specify powder-coated steel and stainless hardware because the alternative is watching a new gate start rusting at the welds within a few seasons.
Styles & brands we work with
Our Main Westminster Services
Most Westminster homeowners reach out for one of two reasons: a gate that has failed mechanically, or an electric gate that has stopped responding. Both have dedicated pages with full detail.
Gate Repair in Westminster
When a Westminster gate sags, jams, or won’t latch, the cause is usually worn hinges, a shifted post, or years of marine air working on untreated steel. Our repair crews reset posts, rebuild hinge blocks, straighten or replace bent frames, and match new steel to the existing design so the fix isn’t visible from the street. We also see a lot of retrofit jobs on older Bolsa Avenue properties where the gate is original to the house but the hardware has been improvised over the years. The goal is your gate, restored to spec, not a temporary patch that fails again in six months. Full breakdown, signs, and costs are on the Gate Repair in Westminster page.
Electric Gate Repair in Westminster
Electric gate failures in Westminster tend to fall into three camps: dead operators, misaligned or dirty photo-eye sensors, and receivers that have lost their programming. We diagnose the control board, the capacitor, the limit switches, and the safety loops, then tell you exactly what failed and what’s still good. Because we’re brand-agnostic, we repair DoorKing, LiftMaster, Elite, Mighty Mule, and more – the right fix, not the easy upsell to a new panel when a relay is all that failed. Details on symptoms, board repair, and cost are on the Electric Gate Repair in Westminster page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Westminster
A new gate installation in Westminster usually means converting a 1960s or 1970s driveway opening into a secure, automated entry point without tearing out the existing fence entirely. We work around the original landscaping and fence lines, reinforcing the existing fence posts where they’re still sound and setting new ones where they aren’t. The most common request across 92683, 92684, and 92685 is a sliding or swing gate with a keypad and remote access, sized for two or three cars and built to cycle many times a day for a busy household or home-based business.
Every Westminster installation follows the same sequence: measure and site survey, permit submission, footing excavation, post setting, gate fabrication or kit assembly, operator and safety edge mounting, programming, and a final walkthrough with you. Because we offer Gate Installation from permit to final programming under one company, you’re not coordinating a welder, an electrician, and a driveway contractor across three separate callbacks.
Automatic Gate Installation
Signs you need it
You’re still walking out to open a gate by hand for every car entering or leaving, or the kids and delivery drivers keep leaving the gate open because the latch is awkward.
What it costs in Westminster
Automatic gate installation in Westminster runs $2,500 – $9,500 depending on gate size, operator type, and whether we’re adding a keypad or intercom.
How we do it
We set the operator posts, mount the arm or slide mechanism, run conduit for power from the nearest dedicated circuit, install the receiver and one or two remotes, and program travel limits plus obstruction sensitivity.
Driveway Gate Installation
Signs you need it
The driveway opening is wide enough for a gate but was never fitted with one, or the existing gate is a lightweight chain-link panel that people can lift off its hinges.
What it costs in Westminster
Driveway gate installation in Westminster starts around $2,300 for a single swing gate and runs to $12,000+ for a custom steel sliding gate with automation.
How we do it
We measure the driveway width and slope, dig and pour footings to the frost-safe depth, set steel posts in concrete, hang and align the gate, then mount and tune the operator so it doesn’t bind at either end of travel.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street or the set-back is short enough that a swinging gate would block the sidewalk when open.
What it costs in Westminster
Sliding gate installation in Westminster is typically $2,800 – $14,000 based on gate length, track or cantilever design, and operator size.
How we do it
We lay the steel track or set cantilever rollers, build and hang the gate panel so it rolls true, install the motor and rack or chain drive, and configure the safety loops and closing timer.
What Gate Installation Costs in Westminster
| Item | Typical range in Westminster |
|---|---|
| Single swing gate, manual | $1,800 – $4,500 |
| Automatic single swing gate with operator | $2,500 – $7,000 |
| Automatic sliding gate, motorized | $2,800 – $14,000 |
Do I need a permit to install a gate in Westminster?
Yes, most motorized gate installations in Westminster require a building permit because the operator is an electrical fixture and the gate itself affects setbacks and pedestrian access. We submit the drawings and pull the permit as part of the installation.
Can you match my existing fence or gate style?
Yes. We match the fence height, top detail, and color as closely as the original, and we fabricate with either solid steel bar or a framework that matches the surrounding 1960s-era ironwork common in Westminster. Call (844) 703-6053 for a site measure, estimates are free.
Brands We Service in Westminster
We work on the brand you already have. That includes DoorKing, Elite, Mighty Mule, and LiftMaster across Westminster. We stock common control boards, remote receivers, photo eyes, and limit switches on our trucks, which is why most brand-specific repairs turn around in one visit. See our brands for the full service list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Westminster, CA
| Service | Typical range in Westminster |
|---|---|
| Gate opener repair | $110 – $410 |
| Gate sensor or photo-eye replacement | $95 – $280 |
| Hinge replacement | $120 – $390 |
| Gate saver or post reinforcement | $95 – $250 |
| Track repair or adjustment | $130 – $380 |
| Remote or keypad programming | $55 – $150 |
| Gate wheel or roller replacement | $90 – $250 |
| Electric strike or lock replacement | $110 – $330 |
| Automatic gate operator replacement | $650 – $1,900 |
| Manual gate repair, no parts | $175 – $340 |
| Single swing gate, manual installation | $1,800 – $4,500 |
| Automatic gate installation | $2,500 – $9,500 |
Two things push Westminster prices up: old fence lines that need post replacement before a new gate can hang true, and upgraded access controls like intercoms, vehicle loops, or keypad entry. The price is quoted and agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Westminster
We cover all of Westminster, including the residential blocks south of Bolsa Avenue and the denser Little Saigon commercial strip where gates do double duty as storefront security. Most calls in the area get a same-day or next-day response for repairs.
- Little Saigon
- Bolsa Avenue corridor
- Westminster Village
- Tri-City area
- Sequoia neighborhood
Service Area – Cities Near Westminster
Manor Gate Repair serves Westminster and the surrounding Orange County communities from the same crew base. If you’re just outside the city line, we likely cover you too. See Midway City, CA, Garden Grove, CA, Stanton, CA, and Huntington Beach, CA for each city’s local service details.
Serving Westminster, CA — Our Local Coverage Area
We’re based in the Westminster area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Westminster
Most Westminster repair calls are scheduled within one to two business days, and emergency failures like a gate stuck open or a small child or pet able to escape get same-day attention when you call before noon. Call (844) 703-6053 and describe what happened – we’ll give you a straight answer on timing.
Yes, many Westminster neighborhoods with HOAs have written standards for gate height, material, and finish, and a few require the design review board to approve the plan before installation. We read the HOA requirements with you during the measure and adjust the drawings so the permit package doesn’t get kicked back.
Yes. A number of Little Saigon storefronts and offices use rolling or sliding gates for overnight security, and we install and repair light-commercial gate systems there. The same brand-agnostic approach applies: if it’s a DoorKing, LiftMaster, Elite, or Mighty Mule operator, we can service it. Call (844) 703-6053 to schedule a walkthrough.
Call Manor Gate Repair at (844) 703-6053 for a free estimate on gate installation, repair, or automation in Westminster. The price is always quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westminster Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Megan Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer