Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Costa Mesa, CA
Gate installation in Costa Mesa means working with salt air, clay-heavy soil, and a housing stock that runs from 1950s ranch homes to new infill townhomes. Manor Gate Repair handles the whole job: assessing the site, recommending the right gate and operator for the property, and installing it to spec. Whether you’re replacing a rusted iron driveway gate in Mesa Verde or adding an automatic aluminum gate to a newer build near South Coast Metro, call us at (844) 703-6053 for a free estimate and written quote.
Why Costa Mesa Homes Are Different
Costa Mesa’s canyon-adjacent neighborhoods like Mesa Verde and the Eastside sit on marine terraces where coastal fog and salt air accelerate rust and corrosion on driveway and pool gates far faster than a few miles inland. Gate repair and installation here is as much about fighting oxidation as it is about hinges and latches. The marine layer that rolls in overnight deposits moisture on metal surfaces, and the onshore breeze west of the 405 carries enough salt to pit unprotected steel within a few seasons.
The housing stock compounds the challenge. Mid-century tract homes from the 1950s through the 1970s on the Westside and Eastside often still have their original wrought-iron or steel gates. Those gates are now sixty to seventy years old, and they show it: rust at the weld points, sagging hinges, latches that no longer catch. In the older Westside neighborhoods especially, gate posts were set in shallow concrete footings that crack and lean as the clay-heavy soil shifts with seasonal moisture. That means gate repairs there frequently require re-setting posts rather than simply adjusting hinges. Newer developments, particularly around South Coast Metro, tend toward aluminum or vinyl gates with different wear patterns and different repair needs entirely.
Styles & brands we work with
Our Main Costa Mesa Services
Most Costa Mesa homeowners reach out to us for one of two reasons: a gate that’s stopped working mechanically, or a gate with an electric operator that’s failed. Here’s what each involves here.
Gate Repair in Costa Mesa
Costa Mesa’s salt air and soil movement create a particular set of gate failures: rusted hinge welds, posts that lean as the clay expands and contracts, and latches that bind from corrosion. We repair the gate you have rather than pushing a replacement. On a 1960s Eastside property that usually means cutting out the rusted section, welding in new steel, re-setting the post, and aligning the gate so it swings clean. See Gate Repair in Costa Mesa for the full scope, including pricing.
Electric Gate Repair in Costa Mesa
Electric gate repair in Costa Mesa is a specialist job. Coastal moisture gets into control boards and corrodes terminals, while operators that sit in direct sun near a stucco wall overheat and shut down. We diagnose across nine automation brands, including Viking, Ghost Controls, DoorKing, and Elite, and we’ll repair the operator you already have instead of defaulting to a full replacement. Our technicians trace faults on the board, check limit switches and sensors, and replace only what’s failed. Electric Gate Repair in Costa Mesa covers the work in detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Costa Mesa
Gate installation in Costa Mesa starts with a read of the site, not a catalog. A 1950s Westside ranch with clay soil and a cracked concrete footing needs a different approach than a brand-new townhome near South Coast Metro with HOA design restrictions. We account for salt exposure, post depth, and the type of operator that will survive the coastal climate. Every job is a full Gate Installation service: we handle the gate, the posts, the operator, the power run, and the safety edges. You get a written, itemized quote before any work starts, and that price is locked.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a gate that should open itself, or your current operator has failed more than twice in two years.
What it costs in Costa Mesa
Automatic gate installation in Costa Mesa typically runs $1,200 to $2,800 depending on the operator brand and the gate’s weight and width.
How we do it
We set the posts to the correct depth, hang the gate, mount and wire the operator, run power to the motor, and program remotes, keypads, and safety edges.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through at the hinges or leaning hard enough that it scrapes the concrete on every swing.
What it costs in Costa Mesa
Driveway gate installation in Costa Mesa typically ranges $2,500 to $6,900 depending on material, size, and whether automation is included.
How we do it
We measure the opening, spec the gate for the weight and wind load, pour new footings where the old ones have cracked, and install the gate, operator, and safety package.
What Gate Installation Costs in Costa Mesa
| Item | Typical range in Costa Mesa |
|---|---|
| Automatic gate installation | $1,200 – $2,800 |
| Driveway gate installation | $2,500 – $6,900 |
| Gate replacement (labor only) | $250 – $650 |
How long does gate installation take in Costa Mesa?
Most gate installations in Costa Mesa take one to two days on site, plus a few days to order the gate if it’s a custom size or finish. We schedule around HOA approval timelines where that applies.
Do you handle HOA approval for gate installation in Costa Mesa?
We provide the specs, drawings, and material samples your HOA or management company will ask for. The approval itself runs through the association, but we’ll coordinate with them so the installation moves on schedule once it’s signed off.
Brands We Service in Costa Mesa
We work on the brand you already have. Our technicians carry control boards, remotes, and sensors for Viking, Ghost Controls, DoorKing, and Elite, which covers the majority of the automated gates in Costa Mesa. See our brands for the full list of nine manufacturers we service. If we need to order a board, it’s typically on hand within a few business days.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Costa Mesa, CA
| Service | Typical range in Costa Mesa |
|---|---|
| Automatic gate installation | $1,200 – $2,800 |
| Driveway gate installation | $2,500 – $6,900 |
| Gate replacement (labor only) | $250 – $650 |
| Gate motor replacement | $475 – $1,200 |
| Control board replacement | $300 – $700 |
| Hinge replacement (per pair) | $85 – $275 |
| Gate wheel or roller replacement | $90 – $180 |
| Sensor replacement | $180 – $350 |
| Track repair or replacement | $150 – $550 |
| Lock and latch repair | $115 – $250 |
Two things push gate repair and installation prices up in Costa Mesa. The first is corrosion: a gate that’s been eating salt air for forty years often has hidden rust at the weld points, and that means more labor once we open it up. The second is the soil. In the older Westside and Eastside neighborhoods, shifting clay cracks footings, and re-setting a post is a separate line item. Whatever the job, you get an itemized quote before we start, and the price we quote is the price you pay.
Neighborhoods We Serve in Costa Mesa
Manor Gate Repair works throughout Costa Mesa, from the 1950s tracts on the Westside to the Eastside’s mid-century homes, up through Mesa Verde and over to the newer developments near South Coast Metro. We also handle gates for townhome and condo communities, where HOA coordination is part of the job.
- Mesa Verde
- Eastside Costa Mesa
- Westside Costa Mesa
- South Coast Metro
- College Park
In most Costa Mesa neighborhoods we can have a technician out within one to two business days for diagnosis, and we prioritize gates that won’t close or won’t secure properly.
Service Area – Cities Near Costa Mesa
Our technicians also cover the surrounding coastal cities regularly. We handle gate repair and installation in Newport Beach, CA, where ocean-facing properties deal with even heavier salt exposure, plus Fountain Valley, CA and Huntington Beach, CA. We also serve San Joaquin Hills, CA for hillside estates with heavier-gauge gates and longer runs.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Costa Mesa
For a gate that won’t close or secure, we schedule diagnosis calls on priority. Most Costa Mesa properties are seen within one to two business days, and we’ll let you know the exact window when you call (844) 703-6053.
Most gate replacements and repairs don’t require a city permit in Costa Mesa. If your property is in an HOA, the association will usually need to approve the design and materials first. We provide the specs they’ll ask for.
Yes. We regularly work with property managers and HOA boards across Costa Mesa, including gated communities and condo complexes. We provide itemized quotes, coordinate access scheduling, and document the work for the association’s records.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Costa Mesa Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Carrie Hoffman"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller