Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Huntington Beach, CA
Gate installation in Huntington Beach starts with a simple fact: the salt air here is hard on metal. We install driveway gates, automatic gates, and sliding gates across 92615, 92646, 92647, and 92648 that are built to survive marine-layer moisture that wrecks ordinary hardware within a few years. Manor Gate Repair has served Huntington Beach since 2014, and our installers carry marine-grade stainless hinges and corrosion-resistant fasteners as standard stock. If you need a gate that holds straight through coastal fog and Santa Ana winds, call home base at (844) 703-6053 for a free measure and written quote.
Why Huntington Beach Homes Are Different
The job changes block by block here. In the older beach-close streets of 92648, original wood driveway gates swell after foggy mornings and bind against their posts. Inland in 92646 and 92647, the 1970s-to-90s tract homes often have HOA-regulated front gates with exact-match hardware requirements. Coastal 92648 properties, and many in 92649, run automated steel gates where salt-fogged hinges seize within a season if the wrong grade of steel was used. A gate that worked fine in Fountain Valley will corrode faster three blocks from Pacific Coast Highway.
Huntington Beach mixes mid-century bungalows near downtown and the pier with larger inland subdivisions. That means no single gate spec fits this city. We quote each job by looking at the actual gate, the exposure to salt air, and whether the HOA has style restrictions. The Santa Ana winds also shift posts over time, so a new installation here needs deeper footings than you’d get away with in an inland Orange County city.
Styles & brands we work with
Our Main Huntington Beach Services
Most Huntington Beach callers need one of two things: a gate fixed back to working order, or an electric gate operator brought back to life. Both are covered below, each with its own dedicated Huntington Beach page.
Gate Repair in Huntington Beach
When a gate sags, sticks, or won’t latch in Huntington Beach, the usual culprit is marine-layer corrosion on hinges and latch hardware. We carry marine-grade stainless replacements on the truck for 92648 beach-close properties where steel fails fastest. From bent slide gates to rusted drop rods, we repair the gate you already have rather than pushing a full replacement. For the complete breakdown of what gate repair looks like in Huntington Beach, see Gate Repair in Huntington Beach.
Electric Gate Repair in Huntington Beach
Salt air gets into operator housings, control boards, and limit switches here faster than most of Orange County. Our electric gate repair work covers LiftMaster and Ghost Controls operators, plus FAAC and BFT hydraulic systems on heavier gates. We diagnose the actual fault, whether it’s a corroded terminal, a failed capacitor, or a misaligned photo eye. Read the full scope at Electric Gate Repair in Huntington Beach.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Huntington Beach
Gate installation in Huntington Beach means planning for what the air here does to metal and wood. We install driveway gates, automatic operators, and sliding systems with corrosion-resistant hardware and footings set below the shifting-soil line so Santa Ana winds don’t pull posts out of plumb within a few years. A beach-close steel gate without marine-grade coating is a future repair bill. That’s why every install includes a corrosion assessment before we order a single part. For the full scope of what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open a heavy driveway gate every day, or your current operator fails intermittently and you want a clean-sheet install rather than another patch.
What it costs in Huntington Beach
Automatic gate installation in Huntington Beach typically runs $2,800 to $7,500 depending on gate size, operator type, and whether we’re running new conduit for power.
How we do it
We survey the gate’s weight and travel path, set the operator mounting plate in concrete, run the power and control wiring, install photo eyes and safety edges, and tune the limit switches for a soft stop at both ends of travel.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the bottom rail, the post has split at the hinge line, or you’re adding a gate where none existed and want a powder-coated steel frame that holds up to salt air.
What it costs in Huntington Beach
Driveway gate installation in Huntington Beach typically runs $2,000 to $6,500 for a single swing gate with hardware, and sliding gates land on the upper end of that range.
How we do it
We check post depth and footing integrity first, then fabricate or order the gate to the exact opening width, hang it on marine-grade stainless hinges, and set the latch and drop rod plate so the gate closes square.
Sliding Gate Installation
Signs you need it
Your driveway slopes or the setback is too short for a swing gate, and a cantilever sliding gate is the only geometry that will work without dragging on the drive.
What it costs in Huntington Beach
Sliding gate installation in Huntington Beach typically runs $3,200 to $7,500 depending on track length, gate weight, and whether an automatic operator is included.
How we do it
We pour a cantilever foundation with reinforced steel, set the gate on rollers, align the track to grade, and mount the operator with a chain or belt drive tuned for smooth startup and stop.
What Gate Installation Costs in Huntington Beach
| Item | Typical range in Huntington Beach |
|---|---|
| Driveway gate, single swing, with hardware | $2,000 – $6,500 |
| Automatic gate operator with installation | $2,800 – $7,500 |
| Sliding gate with track and foundation | $3,200 – $7,500 |
Do I need a permit to install a gate in Huntington Beach?
Most residential driveway gate installations in Huntington Beach do not require a city permit if the gate is under 7 feet tall and set back from the sidewalk, but HOA approval is often required in 92646, 92647, and 92648 communities. We verify HOA rules before ordering materials. Call (844) 703-6053 and we’ll check for your specific property.
How long does a Huntington Beach gate install take?
Most single driveway gate installations finish in one day once materials are on site. Automatic operator installs, sliding gate foundations, and any job needing new power conduit take two to three days. Coastal 92648 jobs sometimes add a half day for corrosion-coating cure time.
Brands We Service in Huntington Beach
We work on the brand you already have. That includes DoorKing, Elite, and Mighty Mule operators on Huntington Beach gates, plus LiftMaster on residential driveway systems. We stock common replacement boards, limit switches, and safety sensors locally for most of these brands, which means many repairs happen in one trip. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Huntington Beach, CA
| Service | Typical range in Huntington Beach |
|---|---|
| Hinge replacement, set of 2 | $150 – $400 |
| Gate alignment and adjustment | $120 – $350 |
| Latch or lock replacement | $95 – $250 |
| Automatic opener repair | $180 – $500 |
| Control board replacement | $250 – $650 |
| Sensor or photo eye replacement | $120 – $300 |
| Driveway gate install with hardware | $2,000 – $6,500 |
| Automatic gate install with operator | $2,800 – $7,500 |
| Sliding gate install with foundation | $3,200 – $7,500 |
| Service call and diagnostic | $75 – $150 |
Beach-close jobs in 92648 usually run toward the upper end of these ranges because rusted hardware takes longer to remove and marine-grade replacement parts cost more than zinc-plated stock. Whatever the job, the price is quoted and agreed before any work begins, so the invoice matches the number you approved.
Neighborhoods We Serve in Huntington Beach
We cover all of Huntington Beach, from the pier-adjacent blocks of 92648 down through the track-home streets of 92646 and 92647, and into the gated coastal properties along Pacific Coast Highway.
- Downtown Huntington Beach (92648)
- South Huntington Beach (92648)
- Seacliff and Edwards Hill (92646)
- Oak View and Beach Boulevard corridor (92647)
- Bolsa Chica and Brightwater (92649)
Response time for most Huntington Beach calls is same-day or next-day, depending on when you call and how far the job is from our Orange County dispatch point.
Service Area – Cities Near Huntington Beach
We also serve the cities that border Huntington Beach. That includes Midway City, CA to the north, Fountain Valley, CA to the northeast, Westminster, CA further north, and Costa Mesa, CA to the southeast. If your gate is anywhere in this corridor, the same team handles the call.
Serving Huntington Beach, CA — Our Local Coverage Area
We’re based in the Huntington Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Huntington Beach
Most Huntington Beach service calls are scheduled within one business day, and we reserve same-day slots for gates that won’t close or won’t latch. Coastal 92648 and 92649 properties are a priority when a failed gate leaves a driveway open to the street. Call (844) 703-6053 and tell us what the gate is doing.
Yes. Many Huntington Beach HOA communities require exact-match hardware on front gates. We document the existing hardware, source matching hinges and latches, and install to the association’s spec so the repair doesn’t create a compliance headache. We’ll ask for your HOA’s gate standards on the first call.
Salt-corroded gates are a standard job for us in Huntington Beach, not a special request. We carry marine-grade stainless hinges, corrosion-resistant latch hardware, and rust converter on the truck. When a steel gate frame is rusted through at the bottom rail, we replace the rail before it fails completely, rather than waiting for a collapse.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Huntington Beach Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta