Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fontana
When an electric gate stops responding in Fontana, you need a technician who knows the difference between a dead control board, a stripped gear, and a gate that was hung wrong forty years ago. We’re Manor Gate Repair, and we work these calls across Fontana every week, from the older South Fontana tract blocks to the newer subdivisions north of Summit Avenue. Most Fontana gate repairs run $180 – $425, and we quote the full price before any work begins. Call (844) 703-6053 and we’ll have a technician diagnose your gate, usually the same day.
Why Manor Gate Repair Is Fontana’s Preferred Electric Gate Repair Company
Fontana gates fail in ways that don’t show up in newer cities. The dust and Santa Ana grit work into rack and pinion assemblies. The summer heat bakes lubricant out of swing hinges. And on the older South Fontana properties, we regularly find hinge posts rusted to the point where adjusting them isn’t an option; they have to be cut and re-welded. That’s the kind of repair you only learn to diagnose after working enough gates here.
Our team, led by Nelson Pryce, services nine major gate automation brands, including DoorKing, LiftMaster, Elite, and Mighty Mule. We don’t push replacement when a board-level repair or a re-welded hinge solves the problem for years. Fontana property managers and homeowners call us because we find the actual fault, regardless of brand, and we quote the fix before we start. From the I-10 corridor warehouse gates to the residential swing gates off Sierra Avenue, we’ve built our reputation on Electric Gate Repair done right the first time, without the upsell.
Styles & brands we work with
Electric Gate Motor in Fontana
Electric gate motor work in Fontana usually comes down to one of three things: a motor that hums but won’t turn, a motor that runs but the gate won’t move, or a motor that cycles fine sometimes and fails other times. The first two are often mechanical, stripped gears or seized bearings. The third is usually the control board or a failing capacitor. On a 1960s swing gate in South Fontana, we’ve also seen operator arms so stressed by a sagging gate that the motor’s internal gears strip within a year of installation.
Swing Gate Motor Diagnosis
Most Fontana residential gates are swing gates. When the motor strains, the problem is often the gate itself: hinges rusted stiff, a post out of plumb, or a rack binding with grit. Replacing the motor without fixing the gate means you’ll be replacing it again. We diagnose the whole assembly.
Slide Gate Motor Repair
Slide gates are more common on Fontana’s commercial and industrial properties, especially near the 210 and I-10 corridors. These see truck traffic daily, and the motors run far more cycles than a residential swing operator. We rebuild drive chains, replace sprockets, and resquare track that’s been knocked out of alignment by forklifts or high winds.
Gate Access Control in Fontana
Gate access control in Fontana means the keypads, intercoms, remote receivers, and safety sensors that tell your gate when to open and when it’s safe to close. On older Fontana gates, especially those installed before UL 325 entrapment protection became standard, we frequently retrofit modern safety photocells and edge sensors onto operators that were never designed for them. Sometimes that’s a clean wiring job. Sometimes the old board simply won’t talk to new safety hardware, and that’s when we have an honest conversation about replacement.
Keypad and Remote Entry Systems
Adding keypad entry to an older Fontana gate is usually straightforward. We wire the keypad into the operator’s open circuit, and most existing remotes continue to work. For gates without a receiver, we install a compatible unit, typically running $250 – $450 including the keypad and programming.
Safety Sensor Retrofits
Entrapment protection isn’t optional on any gate that cycles automatically. If your Fontana gate stops 6 inches before closing or reverses mid-cycle, a misaligned or failed photocell is the usual suspect. We realign, replace, or retrofit sensors so the gate closes fully without posing a risk to vehicles or people.
Trusted Brands We Service in Fontana
We work on the brand you already have. Manor Gate Repair carries parts and knows the service protocols for LiftMaster, DoorKing, Elite, and Mighty Mule, plus FAAC, BFT, Linear, Viking, and Ghost Controls. That includes LiftMaster repair in Fontana. For Fontana customers, that means we can often repair a control board or swap a receiver same-day without waiting on a dealer-only part. We don’t push a full-system replacement just because a cheaper component failed.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Fontana Homes
- Rusted-solid hinges on original 1950s – 60s gates. South Fontana’s post-war wrought iron and chain-link gates were built with hinges that weren’t meant to last 60 years. Many have rusted to the point where the gate can’t swing freely, and the only real fix is cutting and re-welding the hinge post, a repair newer subdivisions rarely need.
- Santa Ana dust binding the rack and pinion. The dry winds push fine grit into everything mechanical. On slide gates, that grit packs into the track and chews up rollers. On swing gates, it gets between the rack and pinion, making the operator strain and trip its thermal cutoff.
- Obsolete control boards that won’t accept modern safety sensors. We see plenty of Fontana operators from the 1990s and early 2000s that predate UL 325 compliance. They run fine until a photocell fails, and then there’s no clean way to wire in a modern replacement. That’s the line where retrofitting stops making sense.
- Post shift and gate sag on older stucco lots. Fontana’s expansive soils shift with seasonal moisture. Over decades, that moves gate posts out of plumb. The gate drags, the operator works harder, and eventually something fails. Re-setting and re-squaring the post is usually cheaper than a new operator.
Pricing for Electric Gate Repair in Fontana, CA
A typical Electric Gate Repair in Fontana call runs $180 – $425 for most motor and control board repairs. Keypad and remote entry additions run $250 – $450. Hinge re-welding and post re-squaring on older South Fontana gates typically runs $300 – $600 depending on how much cutting and fabrication is involved. The price we quote is the price you pay. We give you the number before any work starts, and if we find something additional during the job, we stop and get your approval first. Estimates are always free.
We Also Serve Cities Near Fontana
Manor Gate Repair covers Bloomington, Rialto, Glen Avon, Pedley, and the surrounding Inland Empire communities. If your property is within 20 minutes of our Fontana service area, we can usually have a technician out same-day for emergency gate failures. Call us for scheduling and a written estimate.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fontana
Most of the time it can be saved. We cut the rusted hinge pins and weld in new ones, then re-set the post if it’s shifted. The gate steel itself is often still sound, and re-welding costs far less than a new gate. Call (844) 703-6053 for a free assessment.
Yes. Any operator that controls a vehicular gate is required to have entrapment protection, usually a photocell or edge sensor. If your older Fontana gate cycles without one, it’s a safety liability. We retrofit modern sensors where the control board allows it, and quote replacement when it doesn’t.
It’s usually the gate. A drag is almost always a hinge problem, a post that’s out of plumb, or a rack and pinion packed with dust. The motor is just working harder than it should. Fixing the gate geometry usually solves it without replacing the motor. Call (844) 703-6053 and we’ll diagnose the real cause.
Binding on a slide gate is typically grit-packed track, worn rollers, or a drive sprocket that’s jumped a chain link. On Fontana commercial properties, daily truck traffic and Santa Ana dust accelerate all three. We clean and resquare the track, replace rollers, and retension the chain in one visit.
Yes. Adding a keypad and receiver to an older Fontana gate is usually straightforward and runs $250 – $450 installed. If your operator’s board is too old to accept modern access hardware, we’ll tell you that before quoting the work, and give you the honest number for a replacement operator. Call (844) 703-6053 for a free estimate.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving Fontana and the surrounding Inland Empire.