Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across San Bernardino
Electric gate repair in San Bernardino usually costs $220 – $540 for most opener, control board, and safety sensor issues, with heavy custom gate recalibration on foothill properties running higher. We diagnose and fix the full system, not just the symptom. Manor Gate Repair sends a brand-agnostic technician to San Bernardino who works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so you won’t hear “we don’t service that brand.” We quote the price before any work starts and you approve it up front. Call (844) 703-6053 for a free estimate and a straight answer about your gate.
Why Manor Gate Repair Is San Bernardino’s Preferred Electric Gate Repair Company
San Bernardino’s gate stock isn’t one thing. The flat older neighborhoods around ZIPs 92401 and 92404 are full of 1940s – 1970s tract homes with chain-link and light tubular steel gates that have been patched and re-welded for decades. The foothills north of the 210 hold custom wrought-iron and heavy steel driveway gates that weigh three to five times as much and demand a different repair discipline entirely. Our team works both, and we’ve built our San Bernardino service around that split.
Nelson Pryce has built Manor Gate Repair around brand-agnostic diagnosis. We don’t push a full system replacement when a control board, a limit switch, or a worn rack is the actual fault. That’s the “right fix, not the easy upsell” standard our San Bernardino customers reference in reviews. We quote labor and parts separately, explain exactly what failed, and show you the worn component before we replace it. No mystery invoices, no scope creep.
We’re based in Fontana and run calls across San Bernardino neighborhoods daily. If your gate won’t open, we can typically diagnose the failure the same day. For scheduled calibration and maintenance on custom gates, we’ll set a firm window and show up ready with the right torque settings and bearing kits for your specific operator.
Styles & brands we work with
Gate Opener Repair in San Bernardino
Gate Opener Repair in San Bernardino means restoring the operator, its drive mechanism, and its control inputs so the gate cycles correctly under load. Older chain-link gates in the flatlands often need basic operator repairs: worn limit switches, failing capacitor starts, or arms that have come out of alignment. A typical operator repair in San Bernardino runs $195 – $380, depending on whether it’s a swing arm, a slide rack, or an underground unit.
Underground Operator Recalibration
Underground operators on heavy custom gates are the most exacting repair we do in San Bernardino’s foothill neighborhoods. When seasonal ground movement in the decomposed granite shifts the operator box even a few degrees out of arc, the gate binds, grinds, or reverses mid-travel. We re-seat the box, re-set the pinion mesh, and reprogram soft start/stop ramps so the gate doesn’t jerk against its own mass.
Limit and Torque Adjustments
A gate that stops two feet short of closed is usually a limit switch problem. But on heavy ornamental gates, torque settings matter just as much. Too little torque and the gate stalls on an uphill grade. Too much and you’re putting premature wear on the rack and pinion. We dial both to the gate’s actual weight and travel path, not the factory default.
Automatic Gate Repair in San Bernardino
Automatic Gate Repair in San Bernardino covers every component that makes a gate open itself: the operator, the control board, the safety sensors, the keypad, the remote receiver, and the power supply. What’s failing determines what you’ll pay. A bad safety photocell replacement runs $140 – $240. A control board fault typically runs $260 – $480. A full operator replacement on a heavy custom swing gate can reach $1,500 – $2,800 when the motor, gearbox, and drive rack all need replacement together, which is when a competent diagnosis matters most.
Control Board Diagnostics
We bench-test the board before replacing it. A lot of control boards in San Bernardino get replaced when the actual fault is a loose ground, a cracked relay, or a burned motor capacitor. That diagnostic step saves our customers real money, and it’s why we talk about diagnosis before parts. Your gate, restored to spec, not just swapped until something works.
Safety Sensor and Loop Detector Repair
Safety sensors are a genuine safety matter. A gate that closes on a vehicle or a person because a photocell was bypassed is a liability. When we find a loop detector or a photocell that’s been disabled after a second driveway addition, we tell you directly and quote the repair. We don’t restore an unsafe gate to operation without addressing it.
Trusted Brands We Service in San Bernardino
We work on the brand you already have. That’s the entire point of Manor Gate Repair. Electric Gate Repair is a core competency here, not an add-on, and we keep that standard across nine major automated gate brands. On most San Bernardino jobs we’re servicing LiftMaster and DoorKing operators, with FAAC and BFT common on higher-end Italian hardware, and Mighty Mule and Ghost Controls showing up on newer solar and battery installations. We stock common boards, remotes, safety edges, and capacitor starts, so turnaround on typical repairs in San Bernardino doesn’t drag out waiting on a distributor. If a part is unusual, we tell you the lead time before you approve any work.
Common Electric Gate Repair Problems We See in San Bernardino Homes
- Underground operators knocked out of alignment by foothill soil movement. Sandy decomposed granite shifts with winter moisture and summer drying, and a misaligned operator box is the single most common cause of jerky, reversing custom gates above the 210.
- Santa Ana wind grit in rack and pinion drives. Foothill winds drive fine abrasive particles into exposed hinge points and drive racks on ornamental gates. Sealed bearing upgrades and regular re-lubrication change the failure timeline dramatically.
- Disabled safety photocells and loop detectors on flatland tract homes. When an ADU conversion adds a second driveway in neighborhoods like Muscoy and the Westside, old gate safety loops get out of spec or get bypassed. That’s a genuine safety defect, not a convenience issue.
- Rusted hinge posts in the older clay-soil neighborhoods. Post-WWII chain-link gates in 92401 and 92404 often have posts set in shallow concrete that cracks and spalls after decades of clay expansion, turning a simple hinge repair into a post reset and re-square.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in San Bernardino, CA
Here are real San Bernardino numbers. Safety photocell replacement: $140 – $240. Limit switch repair: $120 – $220. Keypad replacement or remote receiver repair: $160 – $300. Control board replacement: $260 – $480. Opener arm / swing arm replacement: $250 – $500. Underground operator recalibration on a heavy custom gate: $300 – $700. Full automatic operator replacement: $1,500 – $2,800. What drives cost is the gate’s weight, the condition of the drive mechanism, and whether the failure is isolated or has been damaging adjacent components. We quote parts and labor up front, you approve before we touch anything, and the number we quote is the number you pay.
We Also Serve Cities Near San Bernardino
Our Electric Gate Repair in San Bernardino service area reaches Muscoy, Highland, Loma Linda, and Rialto. If you manage a property in one of those neighboring cities, the same brand-agnostic diagnostic standard applies. Call and we’ll tell you which day we’re in your area.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in San Bernardino
The most likely cause is an underground operator that has shifted out of alignment with the gate’s arc due to seasonal movement in the decomposed granite soil, compounded by a worn pinion or rack. We diagnose by checking the operator box alignment, the rack mesh, and the torque settings. Call (844) 703-6053 and we’ll tell you what’s actually failing before any work is approved.
We repair LiftMaster and FAAC operators in San Bernardino regularly. Unless the gearbox is shattered or the control board is obsolete, a repair is usually the right call. We bench-test the board, inspect the gear train, and quote the repair before recommending replacement. The right fix, not the easy upsell.
Adding a second driveway changes the gate’s traffic pattern and the loop detector’s field. The most common fault is a loop detector that’s now out of spec or a photocell that got bypassed during the ADU electrical work. We re-set the loops, replace the photocell if needed, and re-test the full safety circuit. A gate that closes unsafely is a risk we won’t leave live.
San Bernardino’s sandy decomposed granite in the foothills shifts seasonally, which misaligns underground operators and puts hinge posts out of square. The clay soils in the older flatlands expand and crack shallow concrete post footings. Both conditions directly affect how we set posts and calibrate operator torque. Work done anywhere else won’t survive here the same way.
It’s common but not normal. San Bernardino’s summer heat degrades lead-acid backup batteries and can cut panel efficiency on undersized solar arrays. We test the battery bank, the charge controller, and the panel output, then re-size the system if the current array can’t sustain the gate’s duty cycle. A properly sized solar gate opener handles a San Bernardino summer; one that doesn’t needs correction, not acceptance. Call Manor Gate Repair at (844) 703-6053 and we’ll explain what your system is actually doing.
Call Manor Gate Repair for Electric Gate Repair in San Bernardino
If your gate is acting up in San Bernardino, call Manor Gate Repair at (844) 703-6053. We’ll ask what it’s doing, what brand the operator is, and what part of San Bernardino you’re in. Then we’ll tell you what the likely fault is and what the visit costs. Free estimates, written quotes, and work approved before it begins. We repair the gate you have.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving San Bernardino electric gate systems from diagnosis to installation.