Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across San Bernardino
Gate repair in San Bernardino means dealing with two very different sets of problems depending on where you live. In the flat older neighborhoods west of the 215, we see 1950s and 60s chain-link and wrought-iron gates with posts set in shallow concrete that cracked decades ago. North of the 210, wind loads and decomposed granite soils create a different set of failures on heavier automatic driveway gates. Manor Gate Repair works both sides of San Bernardino, and we carry the parts, tooling, and diagnostic equipment to handle everything from a seized hinge to a dead control board. If your gate won’t open, sags, or grinds against the track, call us at (844) 703-6053. We’ll get a technician out to your San Bernardino property, diagnose the actual fault, and quote the fix before any work starts.
Why Manor Gate Repair Is San Bernardino’s Preferred Gate Repair Company
Our San Bernardino customers call us for one consistent reason: we work on the brand you already have. That matters in this city because San Bernardino’s housing stock was built over a 30-year span when gate operators were simpler, and many of those original systems are still hanging on. We don’t push replacements when a repair makes more sense. Our Gate Repair team diagnoses the actual fault on your existing hardware – whether that’s an old LiftMaster swing arm, a Linear slide operator, or a manual gate that never had a motor at all. Nelson Pryce set the standard for us: diagnose accurately, quote honestly, and fix it to spec. The result is that property managers and homeowners across San Bernardino call us back when the next gate problem shows up, and they send us to the next property.
We stay current on the control boards, sensors, and operator hardware that San Bernardino’s older gates need – and we keep common parts on our trucks so most repairs happen in one trip. That matters when your driveway gate is stuck half open on Waterman Avenue and you need it secured before nightfall.
Styles & brands we work with
Driveway Gate Repair in San Bernardino
Driveway gate repair in San Bernardino usually comes down to one of three things: a post that’s moved, a hinge or roller that’s worn out, or an operator that’s no longer doing its job. On flatland properties in the 92401 – 92404 ZIPs, cracked concrete footings are the most common root cause we find. The post shifts, the gate sags, and the operator has to work harder every cycle until something fails. Up in the foothill areas north of the 210, we see more weld fatigue and operator strain from gates fighting Santa Ana wind loads. A typical driveway gate repair in San Bernardino runs $180 – $450 for hinge, roller, or post work. Operator and control board repairs generally run $250 – $650 depending on the brand and what’s failed.
Post Resets and Hinge Work
When a post shifts, replacing the hinge alone won’t fix it. The post has to come out, the footing has to be dug deeper, and the post gets set in a proper concrete pour. In San Bernardino’s clay-soil flatlands this is common; we see it weekly in Muscoy and the Westside.
Operator Diagnosis and Repair
If your opener hums but the gate doesn’t move, or the gate stops mid-cycle and reverses, the issue is often the limit switch, the capacitor, or the control board. We test each component rather than guessing. Our automated gate repair work covers the full range of brands found across San Bernardino, including DoorKing, Elite, Mighty Mule, and LiftMaster.
Gate Welding in San Bernardino
Gate welding in San Bernardino addresses the structural failures that hardware fixes can’t solve. Cracked frame joints, broken pickets, sheared hinge plates, and rusted-through bottom rails all need a welder who understands gate loading, not just someone who can lay a bead. We weld on site when the gate can stay in place, and we remove and bench-weld sections when the damage is extensive. In San Bernardino’s dry heat, steel gates expand and contract more than people expect, and welds placed without accounting for that movement crack again within a season. A typical on-site weld repair in San Bernardino runs $150 – $400. Full frame reinforcement or a re-hang with new hinge plates runs $300 – $700 depending on gate size and condition.
Weld Fatigue from Santa Ana Winds
A gate that faces the Santa Anas takes repeated cyclic loading. The welds at the hinge stiles and the mid-rail take the worst of it. We grind out the failed weld, re-weld with proper penetration, and add gussets where the original design was underbuilt.
Rust Repair and Reinforcement
San Bernardino’s low humidity slows rust, but it doesn’t stop it. Bottom rails on gates near irrigated lawns or sprinkler overspray corrode from the inside out. We cut out the rotted section, weld in new steel, and treat the repair so it doesn’t return in twelve months.
Trusted Brands We Service in San Bernardino
We service the gate operators and hardware already installed across San Bernardino – DoorKing, Elite, Mighty Mule, and LiftMaster are among the most common we see on residential driveways here. Older DoorKing slide operators and LiftMaster swing arms show up constantly on 1980s and 90s era San Bernardino properties, and we still stock parts for many legacy models. We don’t tell you to rip out a perfectly serviceable operator because we don’t carry the brand. We carry the diagnostic tools and the parts inventory for the brands San Bernardino homeowners actually have.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in San Bernardino Homes
- Sagging gates with cracked post footings: In the older flatland neighborhoods, shallow concrete footings cracked by clay-soil expansion let hinge posts lean, so the gate drags or won’t latch. Resetting the post with a deeper pour is the actual fix – new hinges alone won’t hold.
- Dead operators with obsolete control boards: Legacy LiftMaster and Linear boards from the 1990s and early 2000s fail, and the manufacturer stopped making parts. We can sometimes retrofit a modern board into the existing housing; otherwise a new operator is the cheaper long-term answer.
- Wind-fatigued welds and rack hardware: Santa Ana wind events – especially along the 210 corridor and up toward the foothills – put repeated stress on weld joints and rack-and-pinion hardware. These fail suddenly, not gradually, and usually take the gate out of service at the worst time.
- Gates hung without modern safety sensors: Many San Bernardino gates predate current safety edge and photo eye requirements. When we work on those gates, we bring the sensor setup to code as part of the repair rather than leaving a liability in place.
Pricing for Gate Repair in San Bernardino, CA
Gate repair pricing in San Bernardino is straightforward once we know what’s actually wrong. A simple hinge replacement runs $180 – $320. A post reset with a new concrete footing runs $300 – $550. Weld repairs run $150 – $400. Control board and operator work runs $250 – $650 depending on the brand and the part. The things that push cost up here: posts that need deeper excavation in clay or rocky soil, operators that need a full board replacement rather than a component fix, and gates that require removal for bench welding. Every San Bernardino job gets a written quote before we start, and that price is what you pay. Call (844) 703-6053 for a free estimate on gate repair in San Bernardino.
We Also Serve Cities Near San Bernardino
Our San Bernardino coverage extends to the surrounding communities. We work regularly in Muscoy, Highland, Loma Linda, and Rialto – all within a short drive of our shop, so scheduling is quick and our technicians know the local streets and gate styles throughout the area.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Bernardino
Sometimes, but not usually. In San Bernardino’s flatland neighborhoods, the hinge post itself is often the problem – it’s leaning because the shallow concrete footing cracked. New hinges on a moving post won’t hold. We’ll assess it on site, and if the post is the issue, we’ll reset it in a deeper pour and then re-hang the gate. Call (844) 703-6053 for a no-obligation assessment.
It depends on the operator and what’s actually failed. For some legacy LiftMaster and Linear units, we can install a modern retrofit board that fits the existing housing and keeps your gate running. For others, the cost of a retrofit exceeds the price of a new operator, and replacement is the honest recommendation. We’ll show you the numbers either way before you commit. Call (844) 703-6053 and we’ll diagnose it for free.
Yes. Any gate we repair or service in San Bernardino must have functional safety edges and photo eyes that meet current California safety standards. If your older gate doesn’t have them – and many pre-1990s gates in San Bernardino don’t – we’ll add them as part of the repair. It’s not optional, and we won’t leave a gate compliant-less at the curb. Call (844) 703-6053 to schedule a safety audit.
We can usually weld a new rack section onto the existing track, especially if the gate structure itself is still sound. That’s a common repair on older slide gates in San Bernardino. A full gate replacement is only necessary when the frame is too far gone or the rack damage is extensive. We’ll inspect it and give you the honest price for either path. Call (844) 703-6053 for a free repair estimate.
Santa Ana winds put repeated, heavy load on gate welds, hinges, and operators. In San Bernardino, gates that face the prevailing wind direction from the Cajon Pass take the worst of it. We see more weld fatigue, more sheared hinge bolts, and more stripped rack hardware in wind-exposed properties than in sheltered ones. Repairs in those areas need to be reinforced, not just restored. Call (844) 703-6053 to schedule an inspection before the next wind event.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving San Bernardino and surrounding communities.