Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Upland
Gate repair in Upland typically costs $185 – $460 for most residential fixes, with electric gate operator repairs running $275 – $850 depending on the fault. We get to Upland homes quickly from our Fontana base, usually same-day or next morning for a sagging gate, a dead operator, or a hinge pulling loose from a post. Wind damage and post failure are the two problems we see most across Upland’s 91784, 91785, and 91786 zip codes. If your gate won’t open, won’t close, or won’t stay square, call (844) 703-6053 and Nelson Pryce or one of our technicians will get it diagnosed.
Why Manor Gate Repair Is Upland’s Preferred Gate Repair Company
Manor Gate Repair isn’t a handyman service that occasionally looks at a gate. We’re Gate Repair specialists who work on the brand you already have, from a basic chain-link swing gate off Euclid to a custom automated estate gate up in the foothills. We service nine gate automation brands, including LiftMaster, DoorKing, and Mighty Mule, which means we don’t hit a dead end when a Upland customer has an operator we haven’t seen before. Nelson Pryce built the company around brand-agnostic diagnostics: the team finds the actual fault, whether it’s a control board, a sensor, or a hinge anchor pulling out of masonry.
Upland homeowners and property managers call us because the repair actually holds. The difference is the diagnosis. A gate that sags after a Santa Ana wind night usually isn’t a bent gate panel. It’s a hinge post that shifted in its footing. Most general repair services tighten the hinge bolts and leave. We check the post, the footing, the hinge anchors, and the operator strain before we touch anything else. That’s Upland repair work done the right way, not the easy way.
Styles & brands we work with
Metal Gate Repair in Upland
Metal Gate Repair in Upland is our most-requested service, and it’s rarely just about the metal itself. Wrought iron, steel, and aluminum gates take a beating from the dry heat and the Santa Ana winds that slam through the foothill canyon neighborhoods each fall and winter. A homeowner near San Antonio Heights might call us for a gate that’s dragging on the ground, and the actual fault is a hinge post that’s backed out of its masonry footing. We re-set the post, re-anchor the hinges, and re-square the gate before we hand it back.
Hinge and post anchoring
In Upland’s older neighborhoods, many gate posts were set decades ago, sometimes in shallow concrete or directly into aging block walls. When hot, dry conditions shrink the soil and wind loads hit a solid-infill gate, the post moves. We fix the root cause: we reset footings, re-anchor hinge points, and weld or replace damaged hardware so the gate doesn’t shift again in the next wind event.
Weld and rust repair
After a wet winter or a run of heavy morning marine layer moisture, steel gates in Upland show rust at the base, especially where they meet the ground. We grind, treat, and weld rust-weakened spots before they become structural failures. A crack at the bottom hinge is an easy fix if caught early; left alone, it turns into a gate that falls off its post. Metal gate repair in Upland typically runs $185 – $420 depending on the extent of the rust, the hinge work, and whether we need to reset a post.
Wood Gate Repair in Upland
Wood Gate Repair in Upland comes down to the climate: hot, dry inland summers bake wood until it cracks and warps, and then the winter rains and Santa Ana gusts finish the job. A redwood or cedar driveway gate that looked fine in June can be dragging and misaligned by November. We see it every year in the mid-century neighborhoods along Euclid and in the larger foothill properties up in 91784. The fix is usually a combination of re-squaring the frame, replacing split boards, and re-anchoring hinges that have pulled loose from softened wood.
Frame re-squaring and panel replacement
When a wood gate warps, it throws the frame out of square and starts wearing the operator’s rack and pinion or sag-gating against the latch post. We’ll re-square the frame, replace cracked or rotted boards, and re-mount the hinge hardware with longer fasteners that bite into fresh wood. For a Gate Realignment job like this, we check the operator’s travel limits afterward so the motor isn’t fighting a gate that’s now moving differently.
Rot repair at the post base
Upland’s winter rains soak the ground and feed rot at the base of wood gate posts, especially in the foothill neighborhoods where the ground stays moist longer. A post that looks solid at eye level can be spongy below the soil line. We dig, inspect, and either sister a repair or reset the post with proper drainage so it doesn’t just rot again. Wood gate repair in Upland runs $165 – $380 for a typical re-square and board replacement, more if a post needs resetting.
Trusted Brands We Service in Upland
We work on the brand you already have, which matters in Upland where gates range from 1950s-era handmade ironwork to modern automated systems. Our technicians are certified on LiftMaster, DoorKing service in Upland, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. If your LiftMaster operator is straining against a sagging gate or your DoorKing board is faulting out after a power surge, we diagnose it and fix it rather than selling you a full replacement. We keep common boards, sensors, and hinge hardware stocked for runs up to Upland so we’re not waiting on parts from a distributor.
Common Gate Repair Problems We See in Upland Homes
- Santa Ana wind damage to hinge posts. In the 91784 foothill canyon neighborhoods, gusts off the San Gabriel Mountains slam solid-infill gates hard enough to back hinge anchors out of aging masonry. The gate itself is often fine; the post footing is the repair.
- Operators straining against a sagging gate. When a wood gate warps or cracks after the dry summer, it falls out of square and forces the operator to work harder. We see burnt-out motors and stripped rack-and-pinion gears on gates that just needed a re-square.
- Slide gates binding after rain. Winter rains saturate the ground around Upland’s foothill slide gates, and the track or the wheels settle into soft soil. The gate binds mid-travel and the operator trips its safety limit. We re-level the track, reset the wheels, and re-teach travel limits.
- Rust at the base of steel gates and posts. In Upland’s drier stretches, gates look fine until the base starts flaking after a wet season. Rusted hinge welds and corroded post bases account for a steady share of our metal gate repairs each spring.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Upland, CA
Most Upland gate repairs land between $185 and $460 for typical work. A hinge re-anchor or sag correction usually runs $185 – $320. A full post reset with new footing runs $350 – $600 depending on soil conditions and access. Electric gate operator repair runs $275 – $850, with a control board replacement sitting at the high end. The price is quoted and agreed before any work starts. If we find something unexpected during the repair, we stop and talk to you before adding a line item. Call (844) 703-6053 for a free estimate – we’ll come to Upland, look at the gate, and give you a written number.
We Also Serve Cities Near Upland
Our team covers Upland and the surrounding foothill communities. We regularly run up to San Antonio Heights, over to Gate Repair in Upland‘s neighboring cities including Claremont and Montclair along Route 66, and east to Rancho Cucamonga. If your gate is acting up and you’re within twenty minutes of Upland’s north end, call us – we’ll get it looked at.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Upland
The hinge post almost certainly moved. In Upland’s 91784 foothill canyon neighborhoods, the gusts off the San Gabriel Mountains load solid-infill gates so hard they back hinge anchors out of aging masonry or a shallow footing. The gate panel is usually fine. We reset the post and footing, re-anchor the hinges, and re-square the gate so the operator isn’t fighting the misalignment. Call (844) 703-6053 and we’ll get to it.
Every automated gate has a manual release mechanism, usually a small lever or keyed lock on the operator itself. LiftMaster, DoorKing, and Mighty Mule units have slightly different release points, but the principle is the same: disengage the motor, then push the gate open by hand. If you can’t find the release or the gate won’t move manually, call us at (844) 703-6053 and we’ll walk you through it or come out.
Safety note: high-tension springs and cables on some gate systems store enough energy to cause serious injury. Never cut a cable or force a spring. If the gate won’t disengage manually, leave it and call a professional.
Yes. Since the UL 325 standard took effect in the early 2000s, all automated gate operators must have a monitored safety system, typically a photocell, edge sensor, or both, that reverses the gate when it detects an obstruction. If your gate closes on a car or a person and doesn’t stop, the sensors are either missing, misaligned, or faulty. We check and replace safety edges and photocells on every operator repair in Upland.
Most warped and cracked wood gates in Upland can be repaired. The typical fix is re-squaring the frame, replacing the split boards, and re-anchoring the hinges into fresh wood with longer fasteners. We only recommend replacement when the frame itself is rotted through or the wood has delaminated beyond a stable repair. Get a repair quote first; a lot of gates that look done are perfectly salvageable.
Water-saturated soil under the track or wheels settles unevenly, letting one side of the gate drop. The gate binds mid-travel and the operator trips its safety limit or burns the motor fighting it. In Upland’s foothill neighborhoods where the ground holds water longer, we re-level the track, reset the wheels, and re-teach the operator’s travel limits after any significant rain.
Ready to Get Your Gate Working Again in Upland?
Call Manor Gate Repair at (844) 703-6053 for a free estimate on any gate repair in Upland. We’ll talk through what you’re seeing, give you a realistic number, and set a time to come out. Nelson Pryce and the team work on the gate you already have, fix the actual fault, and quote before any work starts. Automated gate specialist, from diagnosis to installation. Your gate, restored to spec.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving Upland and the surrounding foothill communities.