Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Fontana?
Gate installation in Fontana typically runs $1,900 to $4,600 for a single residential driveway gate, including the operator and standard safety equipment. A basic pedestrian or garden gate lands closer to $900 – $1,600, while a dual-swing automated driveway system with masonry columns and premium finishes can reach $9,000 and up. The number that matters most for your property depends on gate size, material, and whether you’re adding automation from the start.
Our Gate Installation services cover automated gates across Fontana, from the newer tracts off the I-210 corridor to the larger lots up in the foothills. Whether your gate will face a LiftMaster operator or a DoorKing access system, the estimate should be itemized before anyone touches your driveway. We’re happy to walk through it line by line.
Gate Installation Cost Breakdown (2026)
Here’s how the numbers stack up for a typical Fontana residential installation. These are real-world ranges, not marketing teasers. Your exact figure depends on what you’re hanging and how it’s powered.
| Line Item | Typical Range (Fontana, 2026) |
|---|---|
| Basic metal pedestrian or garden gate (no operator) | $900 – $1,600 |
| Single-swing driveway gate, manual | $1,900 – $3,200 |
| Dual-swing driveway gate, manual | $3,000 – $5,500 |
| Sliding driveway gate (track or cantilever) | $4,500 – $8,000 |
| Automated swing operator (LiftMaster, FAAC, BFT, Elite) | $1,200 – $2,800 installed |
| Automated sliding operator (FAAC, BFT, DoorKing) | $1,500 – $3,400 installed |
| Safety sensors, loops, and photo-eye package | $300 – $700 |
| Keypad, intercom, or remote access add-on | $250 – $1,200 |
| Electrical run to gate location (per foot, varies) | $900 – $4,000+ |
| Concrete work / footing prep | $400 – $1,800 |
The two items that swing a quote the most are electrical supply and gate material. A property where power already reaches the gate location can save thousands versus a yard that needs a new trench and conduit run. Our team sizes the operator to the gate, not the other way around. On more than one Fontana job we’ve seen a general handyman sell an undersized Mighty Mule for a gate heavy enough to require a FAAC or BFT operator, and the result is a motor that burns out within two seasons.
What Affects Gate Installation Pricing in Fontana
Fontana has its own conditions that drive cost. These aren’t generic factors; they’re specific to how properties here are built and what the local climate does to gate hardware.
- Wind and soil movement in the foothill neighborhoods. Properties up toward the Lytle Creek and foothill areas get Santa Ana wind gusts that stress gate posts. We oversize footings and set heavier hinges on these installs, which adds a little cost up front but prevents sagging within a year.
- Gate material. Ornamental iron and steel run higher than aluminum but hold up better against the heat and dust Fontana summers throw at them. Vinyl and wood gates cost less but need more attention over time. We’ll tell you plainly which material fits your gate’s job on the property.
- Operator brand and duty cycle. A LiftMaster or Elite on a light residential swing gate is a different price bracket than a DoorKing designed for a gated HOA entrance used by dozens of vehicles an hour. The right operator depends on traffic, gate weight, and how often it cycles.
- Power and access wiring. If your gate location has no electrical service, the trench, conduit, and low-voltage run can add several thousand dollars. This is the single most underestimated line item in Fontana gate quotes.
- Access control scope. A simple keypad is cheap. A full intercom, vehicle loop, and phone-app access package for a property manager or HOA is not. We scope it to what the property actually needs.
- Permits and HOA review. Fontana residential gate projects and HOA-controlled entries sometimes require plan review and city permitting, which adds fees and time. We flag any permit requirement before work begins so there are no surprise charges on the invoice.
If you want the full scope of what our gate installation in Fontana service covers, it’s laid out on that page. For the broader picture of our work across the region, our home page is the place to start.
Brands We Install and Why It Affects Your Price
The operator brand you choose is one of the clearest cost levers on the whole project. We work with nine major brands across Fontana: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Each sits in a different slot on the price-and-duty spectrum, and the right pick depends on your gate’s weight, traffic, and how much access control you need.
A Mighty Mule or Ghost Controls operator suits a lighter residential swing gate and keeps the budget in check. A FAAC or BFT sliding operator is built for heavier use and complex access setups. DoorKing comes into play on gated community and property-management entries where phone entry and vehicle loops matter. LiftMaster and Elite are our go-to for dependable residential swing automation, and Linear and Viking round out the mix for specific gate styles.
Because we service all nine, we don’t steer you toward whichever brand a single-dealer contractor is locked into. We match the operator to the gate. That’s the difference between an automated gate specialist and a brand representative.
Manual Versus Automated Gate Cost
If you’re weighing whether to automate now or later, here’s the honest math. A manual single-swing driveway gate in Fontana runs $1,900 – $3,200 installed. Adding automation brings it to roughly $3,100 – $6,000. Doing both at once usually costs less than installing the gate, then coming back months later to hang an operator on it, because the gate frame and mounting points get built to automation spec from day one. Retrofit automation onto an existing gate is entirely doable, but it sometimes means reinforcing hinges or resizing the frame, and that’s where the cost creeps up.
Sliding Versus Swing Gates
Sliding gates cost more than swing gates up front, mostly because of the track, foundation, and heavier steel. But on a Fontana property with a steep or short driveway, a swing gate has nowhere to open, so a cantilever or track slider is the only real option. We measure the driveway before quoting, because the gate geometry decides the whole budget.
How to Save on Gate Installation
There are real ways to keep a Fontana gate project from running over. None of them involve cutting corners on safety or the operator, because that just moves the cost to next year.
- Get an itemized quote. A number with no breakdown is where overcharges hide. Ask for the gate, the operator, the wiring, and the concrete as separate lines. Our estimates are free – call (844) 703-6053 and we’ll price each piece.
- Automate at install, not later. As covered above, building for automation from day one usually saves a few hundred to a few thousand over a retrofit.
- Check whether power already reaches the gate. If a previous owner ran conduit to the gate location, you skip the most expensive unknown in the quote. We’ll verify this on site.
- Match the operator to the gate. Oversizing wastes money; undersizing burns out a motor early. A correctly specced LiftMaster or FAAC costs less over five years than a cheap unit replaced twice.
- Coordinate with your HOA early. In Fontana HOA communities, getting access-control spec and design approval settled before ordering the gate prevents change-order fees later.
- Keep existing access hardware where it works. Sometimes the keypad, sensors, or intercom are still good. We test them and reuse what’s sound rather than upselling a full replacement.
The right fix, not the easy upsell, is how we approach every quote. That’s the Manor standard: the property gets what it actually needs.
What Does an Automated Gate Cost Versus a Manual Gate in Fontana?
An automated single driveway gate in Fontana runs about $3,100 – $6,000 installed, versus $1,900 – $3,200 for a manual gate. The $1,200 – $2,800 difference is the operator plus safety sensors. Call (844) 703-6053 for an exact figure on your gate.
Is It Cheaper to Repair or Replace My Gate?
Repair is usually cheaper than replacement if the posts, frame, and operator are structurally sound. A repair typically lands at $200 – $800 versus $1,900+ for a new gate. But if the operator board is failing and the gate frame is warped, replacement wins on cost within a few years. We diagnose first, then tell you straight.
Can You Install My Gate the Same Week?
Most standard residential gate installations can be scheduled within a week or two once the estimate is approved. Custom iron, complex access control, and projects requiring city permits take longer. Call (844) 703-6053 to check current scheduling for your Fontana address.
Why Brand Range Matters for Your Gate Budget
A lot of gate work in Fontana gets quoted by contractors who service one brand or dabble in gates between other jobs. That narrows your options and can inflate cost, because they only know one price point. Our cross-brand coverage means we diagnose the actual fault or recommend the actual right operator, whether that’s a Linear for a modest swing gate or a DoorKing for a managed entrance. Brand-agnostic diagnostics keep you from paying for a full-system replacement when a control board or sensor is the real issue.
Electric and automated gate repair is core to what we do, not a side service. That matters at install time because the wiring, the sensor placement, and the operator sizing all get done by the same specialist who’ll service it later. From diagnosis to installation, one company owns the whole lifecycle. No coordinating a gate fabricator, an electrician, and an automation dealer separately.
The “Manor” positioning means we build to estate- and property-management-grade standards: gates that protect high-value properties in Fontana, not just budget fixes. If you’d like to see our full range of repair and installation work, our home page and our Fontana gate installation page lay out the scope. You can also call us directly for a free, no-pressure estimate.
FAQs – Gate Installation Cost in Fontana
How much does gate installation cost in Fontana in 2026?
Gate installation in Fontana runs $1,900 – $4,600 for a single residential driveway gate with automation, and $900 – $1,600 for a pedestrian gate without an operator. Dual-swing and sliding systems can reach $5,500 – $9,000. Call (844) 703-6053 for a free itemized quote on your property.
What’s the cost of installing an electric gate in Fontana?
Installing an electric, automated gate in Fontana typically costs $3,100 – $6,000 for a single swing gate, including the operator, sensors, and standard wiring. Sliding electric gates run $5,500 – $9,000+ depending on track foundation and access control. Estimates are free – call (844) 703-6053.
Do I need a permit to install a gate in Fontana?
Many Fontana residential gate installations and most automated driveway gates require a city permit, and HOA-controlled entries often need plan review too. Permit fees vary by scope. We flag what’s required before work starts so there are no surprises. Call (844) 703-6053 to talk through your project.
How much does it cost to automate an existing gate in Fontana?
Automating an existing manual gate in Fontana costs $1,200 – $2,800 for the operator and safety package, plus up to $700 for sensors and loops. If the frame needs reinforcement to handle the motor, add $200 – $600. Call (844) 703-6053 and we’ll assess your gate first.
Why does gate installation cost vary so much in Fontana?
The biggest swings come from electrical supply to the gate location ($900 – $4,000+), gate material, and operator brand, which together can move a quote by thousands. Foothill wind and footing requirements add a bit more. Call (844) 703-6053 for a line-by-line estimate tailored to your address.
Can you service the gate operator brand I already have?
We service nine major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so there’s no “we don’t work on that” dead end. If your operator is one of these, we can diagnose and repair it. Call (844) 703-6053 to confirm your model.
Is it cheaper to repair or replace a failing automated gate?
Repair usually wins at $200 – $800 when the frame and posts are sound, versus $1,900+ to replace. But a failed control board on a gate that’s already warped often tips toward replacement within a few years. We diagnose the actual fault before recommending anything – call (844) 703-6053.
How long does gate installation take in Fontana?
A standard residential swing gate installs in about one day once materials arrive; sliding gates and full access-control packages take two to three days. Permit review adds lead time. Call (844) 703-6053 to check scheduling for your Fontana address.
Get a Free Gate Installation Estimate in Fontana
Whether you’re adding a driveway gate, automating an entry, or replacing an operator that’s finally given out, the fastest way to a real number is a conversation. We serve Fontana and the surrounding area with repair, electric gate repair, and full installation under one roof, and we work on the brand you already have or the one that fits your gate best. Estimates are always free, and we price it line by line so you can see exactly where the money goes. Call (844) 703-6053 to schedule.
Pricing reflects the Fontana market as of 2026. Manor Gate Repair offers free estimates – call (844) 703-6053.
What Our Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniel Thompson"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Carrie Hoffman"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes