Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Fontana Homeowners
When your electric gate stops responding to the remote, grinds mid-travel, or sits frozen half-open across your driveway, you’re looking at a problem that affects both security and daily routine. Manor Gate Repair specializes in electric gate repair in Fontana, CA, and we handle the control boards, operators, safety sensors, and motor issues that general handymen won’t touch. Our technicians work on nine major gate automation brands, so the fix comes from someone who actually understands the system sitting on your property, not someone learning on the job. Call (844) 703-6053 for a free estimate and straightforward diagnosis.
Led by Nelson Pryce, our team treats every Fontana gate as a security system first and a mechanical device second. That means we’re looking at sensor alignment, control board faults, and operator torque specs, not just greasing hinges and calling it done. If you’re in Fontana, Bloomington, Rialto, or anywhere in the surrounding Inland Empire, including Glen Avon, we’ll get your gate back to spec.
Gate Opener Repair
Gate opener repair covers the motorized operator that moves your gate leaf, and it’s the most common service call we run in Fontana. When your opener runs but the gate barely moves, or the motor hums without engaging, you need a technician who can distinguish between a stripped gear, a failed capacitor, and a worn drive belt. Manor Gate Repair performs gate opener repair on LiftMaster, DoorKing, Elite, and Mighty Mule units, among others, restoring full travel and proper force settings. Typical opener repairs in Fontana run $180 to $450, depending on the part required and the complexity of the operator. We quote the price before any work starts, so there’s no surprise at invoice time.
Geared Operator Failures
Most residential swing gate openers use a worm gear or planetary gear reduction. Over years of heat and load, the gear teeth strip, and the motor will spin but the gate stays put. We replace the gear assembly and check the operator’s internal limit switches in the same visit, because a stripped gear that ran long enough has usually knocked the travel settings out of spec.
Control Board Diagnosis
When your opener doesn’t respond to remotes or keypads, the control board is often the culprit rather than the motor. We test input terminals, relay function, and power supply output before recommending a board replacement, which keeps you from paying for a full operator swap when a $120 diagnostic catches the real fault.
Styles & brands we work with
Automatic Gate Repair
Automatic gate repair in Fontana means restoring the system’s automation, not just making the gate swing. That includes remote programming, loop detector tuning, safety edge integration, and synchronization between the operator and access controls. Manor Gate Repair handles automatic gate repair on both residential and light commercial systems, and we’re familiar with the quirks of Ghost Controls and Linear controllers alongside the more common DoorKing and LiftMaster lineups. Expect to pay $200 to $600 for a typical automatic gate repair depending on whether the issue is electrical, mechanical, or programming-related. Every job starts with a free estimate and a clearly explained scope of work.
Remote and Receiver Reprogramming
If your gate only opens from the keypad but not the car remote, the receiver board or the remote transmitter itself has likely failed or fallen out of sync. We can reprogram existing remotes, replace receiver modules, and install new transmitters matched to your existing system, usually without replacing the operator.
Loop and Safety Sensor Repairs
Vehicle detection loops embedded in the driveway or free-exit loops inside the property are common failure points on automatic gates. When a loop wire breaks or a loop detector fails, the gate either won’t trigger or keeps tripping unnecessarily. We run continuity checks and replace loop detectors and wiring as needed.
Electric Gate Motor
The electric gate motor is the workhorse of the entire system, and when it’s failing you’ll usually hear it before you see it: louder-than-normal operation, grinding during travel, or a motor that runs but the gate doesn’t move. Manor Gate Repair services electric gate motors on swing and slide gates across Fontana, replacing burned-out motors, worn brushes, or failed capacitors rather than defaulting to a full operator replacement. An electric gate motor replacement in Fontana generally runs $350 to $800 depending on voltage, horsepower, and brand. We’ll test your existing motor under load before recommending any replacement, so you only pay for what your gate actually needs.
AC vs. DC Motor Replacement
Older Fontana gates often run on AC motors that are simple but lack the soft-start features of newer DC units. We replace both types and can advise whether upgrading to a DC motor makes sense for your gate’s weight, cycle frequency, and power supply. The decision is based on torque requirements and your gate’s physical size, not a sales goal.
Capacitor and Brush Service
Single-phase AC motors rely on starting capacitors that fail predictably after several years in Fontana heat. Swollen or leaking capacitors cause the motor to hum without turning. We keep common capacitor and brush sets stocked for DoorKing, Elite, and Mighty Mule operators, which means many motor repairs are completed same-day without parts delays.
Gate Access Control
Gate access control covers everything that tells your gate who to open for: keypads, telephone entry systems, card readers, intercoms, and the wiring that connects them to the operator. When your keypad codes stop working or your intercom feeds static instead of a voice, Manor Gate Repair diagnoses the access control layer as thoroughly as the mechanical layer. Fontana homeowners and property managers typically spend $150 to $500 on access control repair or component replacement, depending on the device and whether the issue is programming, wiring, or hardware failure. We work on standalone keypads, multi-tenant telephone entry systems, and integrated RFID readers without brand restriction.
Keypad and Card Reader Repairs
Keypads exposed to direct Inland Empire sun and rain corrode at the contact points, and card readers can fall out of calibration after years of use. We repair or replace weatherproof keypads, reprogram access codes, and test reader output at the operator terminals to confirm the entire signal path works after the repair.
Telephone Entry System Wiring
For Fontana properties with guest entry systems tied to resident phone lines, we trace low-voltage wiring from the call box to the controller and operator. Loose connections, rodent damage, and oxidized terminals are common faults we resolve without replacing the entire entry console.
Commercial Gate Operator
Commercial gate operator repair in Fontana addresses the heavier-duty operators on apartment complexes, business parks, and HOA entrances. These systems run many more cycles per day than residential gates, which means wear accumulates faster and failures tend to be more urgent. Manor Gate Repair services commercial gate operators from DoorKing, Elite, and LiftMaster, including hydraulic and electromechanical slide gate drivers. Commercial gate operator repairs in Fontana typically range from $400 to $1,200 based on the operator type, parts, and whether the system can be brought back online same-day. We provide a written estimate covering parts and labor before beginning any work.
High-Cycle Operator Diagnosis
A commercial gate may cycle 300 to 500 times daily at a busy Fontana apartment entrance. That workload demands inspection of sprockets, chains, emergency release mechanisms, and motor thermal overload protection. We check all of it during a service call, not just the part that failed.
Slide Gate Track and Roller Service
Slide gates put enormous stress on track wheels and cantilever rollers. When rollers wear down, the gate drags and the operator pulls higher amperage, which shortens motor life. We replace worn rollers and re-align the gate on its track, returning the operator to its designed load range.
Brands We Service
Manor Gate Repair fields calls for DoorKing operators on a regular basis in Fontana, particularly the 9150 and 9100 series slide gate operators common on multi-unit properties. We know these units’ limit switch assemblies and reversing loop inputs well, and we stock the most frequently needed DoorKing replacement parts.
We also service LiftMaster residential and commercial operators, Elite slide gate systems, and Mighty Mule openers found on many Fontana residential properties. Each brand has its own failure patterns: LiftMaster control boards are generally robust but remote programming can be finicky, Elite chain drives need tension checks, and Mighty Mule units on residential gates are often victim to power surges. Whether you have DoorKing, Elite, Mighty Mule, LiftMaster, or any other make, we diagnose and repair what you already have rather than steering you toward a full system replacement.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate only moves halfway. This usually indicates a limit switch failure or an obstruction sensor tripping incorrectly. A gate that stops midway leaves your property exposed and puts excess strain on the operator every time you force a cycle.
- You hear grinding or a metallic slapping sound during travel. That’s the sound of drive components wearing past tolerance. Rolling with a grinding gear or slapping chain accelerates damage to the operator and can make the repair bill larger the longer you wait.
- The gate opens or closes on its own. A phantom-activating gate means a failing loop detector, shorted control wiring, or a receiver picking up stray radio signals. This is a safety concern, especially with vehicle or pedestrian traffic near the gate path.
- Your remote only works from five feet away. Range that collapses over time points to a failing receiver board or antenna connection. It’s often a simple fix, but left alone the receiver will eventually drop signal entirely, leaving you to open the gate manually or not at all.
- The gate reverses for no reason or doesn’t stop when it should. The safety edges and obstruction sensing are the only things protecting people and vehicles from a moving gate. When these fail, the system needs immediate attention from a technician who understands force calibration and sensor alignment.
Our Process, Step by Step
- 1
Diagnostic test and load check. We test the operator under load, measure voltage at the motor and control board, and check each safety device in sequence. Most electric gate faults reveal themselves during this phase, and we document exactly what we find before quoting any repair.
- 2
Written estimate with parts and labor separated. You’ll know the cost of the part, the cost of the labor, and how long the repair should take. The price is agreed before we start turning wrenches.
- 3
Repair or replacement of the failed component. We carry a range of OEM and compatible parts for DoorKing, LiftMaster, Elite, and Mighty Mule operators on our trucks, which means many repairs are completed in a single visit to your Fontana property.
- 4
Safety system verification. After the repair, we test the safety edges, photo eyes, loop detectors, and force settings to confirm the gate stops and reverses correctly under obstruction. This step is what separates a specialist repair from a parts swap.
- 5
Final walkthrough and maintenance notes. Before we leave, we’ll show you what was repaired and tell you what’s worth watching in the coming months. You’ll know the condition of your gate system, not just that the immediate problem was fixed.
How Much Does Electric Gate Repair Cost in Fontana?
A typical gate opener repair in Fontana runs $180 to $450, while automatic gate repair with access control components starts around $200 and can reach $600 depending on the failure. Electric gate motor replacement is the biggest single expense in the repair category, ranging from $350 to $800 for a new motor and installation. Commercial gate operator work is priced separately, typically $400 to $1,200, because the equipment is larger, older, and subject to more daily cycles. These are the figures we work from when quoting Fontana jobs, and they hold across the surrounding areas of Bloomington, Rialto, and Colton as well.
What affects your price? The brand and age of your operator matter most; a 15-year-old DoorKing slide operator with a failed control board costs more to repair than a newer residential Mighty Mule with a simple capacitor issue. Access to the operator, whether the gate is on concrete pillars or a welded steel post, and the number of safety devices wired into the system all factor into labor. To avoid overpaying, get the diagnosis first and ask to see the failed part. Our free estimates include the diagnosis and the parts-and-labor breakdown, so you can make a decision without pressure.
Our Service Area Near Fontana
Manor Gate Repair serves Fontana and the surrounding communities, including Bloomington, Rialto, Sunnyslope, Glen Avon, Muscoy, Rubidoux, Colton, Highgrove, Grand Terrace, Jurupa Valley, and San Bernardino. Most electric gate repair calls in Fontana are scheduled within one to two business days, with emergency service available when a gate is stuck open or unsecured. If your home is in a neighborhood like Sierra Lakes, Heritage Village, or the developments along Summit Avenue, we’re close by and familiar with the gate systems installed throughout the area.
If you’re looking for a broader overview of what we do, you can also visit our home page to see our full service range, or review our dedicated Electric Gate Repair in Fontana page for more detail on this service.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Fontana
Electric gate repair is the diagnosis and restoration of automated and motorized gate systems, including the operator, control board, safety sensors, access controls, and motor. It covers any failure that prevents the gate from opening, closing, or responding correctly to remotes, keypads, or vehicle detectors. Manor Gate Repair handles the full spectrum of electric gate repair in Fontana, from simple remote reprogramming to full operator replacement.
Most residential electric gate repairs in Fontana are completed in one to three hours on-site, assuming parts are available on our truck. More involved repairs, like a motor replacement or a control board swap, can take four to six hours. Commercial gate operator repairs may take longer depending on the operator type and access to the equipment.
Electric gate repair in Fontana typically costs between $180 and $800, depending on whether the repair involves a gate opener component, an electric gate motor replacement, or access control work. Commercial gate operators run higher, from $400 to $1,200. Call (844) 703-6053 for a free estimate on your specific gate system.
Yes, DoorKing is one of the nine brands we service regularly, and we work on both their residential and commercial slide and swing gate operators. We stock common DoorKing parts and know the control board and limit switch systems on their units. Whether you have DoorKing, LiftMaster, Elite, or Mighty Mule, we can diagnose and repair the equipment you already have.
When a gate is stuck open or won’t close, we prioritize emergency calls in Fontana and the surrounding areas. An unsecured automated gate is a security problem that needs attention quickly. Call (844) 703-6053 and tell us what the gate is doing; we’ll let you know the soonest we can be there.
Our repair work is backed by workmanship and part warranties where the manufacturer offers them. We’ll explain what’s covered for the specific part or repair before we start the job. You’ll know exactly what you’re getting and what protections apply to your Fontana gate repair.
Make sure the area around the gate operator is clear so our technician can access the motor, control box, and safety sensors. If you have a manual release key or a gate access code, have those ready. A quick note about what the gate has been doing wrong, like intermittent opening or a remote that stopped working helps our diagnostic go faster once we arrive.
Schedule Your Electric Gate Repair Service in Fontana Today
If your automated gate is acting up, don’t wait for it to fail completely. Call Manor Gate Repair at (844) 703-6053 and Nelson Pryce and the team will schedule a free, no-obligation estimate on electric gate repair in Fontana. We’ll diagnose the problem, give you the exact price before any work begins, and get your gate back to full function.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving Fontana and the surrounding Inland Empire communities.