Ghost Controls Gate Repair in Wrightwood, CA

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Wrightwood, CA | Manor Gate Repair

Ghost Controls gate repair in Wrightwood means diagnosing and fixing solar or AC swing-gate openers at 6,000 feet, where snow, freeze-thaw, and wind load cause failures a flatland tech would never see. We’re Manor Gate Repair, an independent Ghost Controls service provider serving Wrightwood, and we work on these systems weekly across the San Gabriels. If your opener died after a storm or the gate stops short of the latch, call (844) 703-6053. We are not authorized, sponsored, or endorsed by Ghost Controls. We’re the shop that reads the mountain conditions along with the control board.

Call (844) 703-6053

Key takeaways:

  • Independent Ghost Controls repair for Wrightwood, CA 92397
  • Solar-charged battery failures, control-board faults, and frozen arm geometry from snow and freeze-thaw
  • OEM Ghost Controls parts plus quality aftermarket equivalents where they’re proven
  • Free estimates at (844) 703-6053

Why Wrightwood Residents Choose Us for Ghost Controls Service

Most gate companies either sell one brand or avoid automation entirely. We sit somewhere different: a multi-brand gate shop that services nine automation names, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so a Ghost Controls opener never gets a dead-end answer from us. Nelson Pryce, our owner and lead technician, built that approach over two decades of diagnosing opener failures across the Inland Empire, from Piñon Hills Ghost Controls service calls to the San Gabriels. He’ll tell you that a gate that hesitates is a gate that’s telling you something. The job is to listen before you wrench. In Wrightwood, that means reading what the mountain did to the opener before swapping parts.

We stock Ghost Controls OEM boards, arms, batteries, and solar panels where they’re available and proven, and we carry quality aftermarket batteries and hardware where OEM replacements are pricey or slow to arrive. That matters in Wrightwood, because waiting a week for a shipped part while the gate sits open isn’t how anyone up here wants to live. If you already have Ghost Controls, we work on the brand you already have. We don’t push full-system replacement unless the housing, gearing, or arm geometry is genuinely worn out.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Wrightwood

  • Solar-charged battery packs that quit holding charge after cold snaps. At roughly 6,000 feet, a lead-acid or lithium pack that worked fine in October can be dead by January. The opener goes dark mid-cycle or won’t wake at dawn. We replace the pack and test the panel output before you pay for another battery.
  • Control-board and limit-switch faults after wind-driven rain and freeze-thaw. Wrightwood gets real wind, and moisture gets driven into enclosures that aren’t sealed. The arm reverses, stops short of the latch, or forgets its limits. We diagnose the board or switch specifically, not the whole kit.
  • Opener arms and mounting brackets binding when the gate frame racks. Snow berms from plowing, frozen gravel drives, and slope settlement twist wood and iron gate frames. The operator overloads and faults. We realign the leaves, re-anchor the bracket, and re-run limits.
  • Stripped or slipping manual-release and arm-pin hardware. After a power outage or post-storm snow clearing, someone forces the gate by hand. The release pin or arm hardware takes the damage. We replace the worn hardware and set the release tension correctly.
  • Dual-swing synchronization loss on heavier custom gates. When one leaf sags into a plowed berm, the Ghost Controls TD2 / TDS2 kit throws sync faults. The gate opens lopsided or refuses to close. We realign both leaves and re-sync the operators to the latch.

Ghost Controls Service in Wrightwood: What Local Conditions Mean for Your Equipment

Wrightwood’s wildfire-prevention clearing pushes many homeowners toward open, non-combustible gate designs. That means Ghost Controls operators here are often mounted to custom iron or tube gates on cleared slopes rather than to attached wood fencing. The fence line isn’t the problem. The arm geometry and post anchoring are. When a gate post shifts a half inch from freeze-thaw on a sloped lot, the arm angle changes, the operator strains, and the board reads an obstruction that isn’t there. In Wrightwood and nearby Ghost Controls in Oak Hills, we see that exact pattern repeatedly on the sloped gravel drives up toward the bench above town. The fix is rarely the motor. It’s usually realigning the post, re-anchoring the bracket, and re-running the Ghost Controls limits to match the gate’s actual travel. That’s the kind of checkable, mountain-specific detail a flatland gate page never addresses.

Ghost Controls Models & Products We Service in Wrightwood

We service the Ghost Controls Heavy-Duty Single Swing (TDS series), the Dual Swing (TD2 / TDS2) kits, and the Solar-Efficient Swing opener kits with 10W or 30W panels. That includes the architectural and high-traffic swing kits with the tube-gate arm. On every job we look at the board, the arm, the battery, and the panel as separate replaceable components. Ghost Controls boards, arms, batteries, and sensors are all individually serviceable. We use OEM parts where they’re available and proven, and quality aftermarket batteries and hardware where OEM is slow or expensive. For Wrightwood, we keep common Ghost Controls battery packs, arm hardware, and limit switches on hand so a repair doesn’t stall waiting on freight.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Wrightwood

Ghost Controls gate repair in Wrightwood typically runs $115 to $165 for diagnosis, with common component fixes like a battery or limit-switch replacement in the $195 to $365 range. A full control board replacement starts near $375. If the housing, gearing, or arm geometry is worn out, a full system replacement ranges from $850 to $1,800 depending on the opening size, panel wattage, and post work. Your price is quoted and agreed before any work starts. No invoice bigger than the quote, ever. The free estimate includes the diagnosis, the specific failed component, and the Wrightwood-specific fix. Call (844) 703-6053 for an exact quote, estimates are free.

Serving Wrightwood, CA — Our Local Coverage Area

We’re based in the Wrightwood area and know this community well, with Ghost Controls in Phelan also within our service range. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Wrightwood

Service Areas Near Wrightwood

Beyond Wrightwood, our Ghost Controls service area reaches Fontana, Bloomington, Rialto, Sunnyslope, Glen Avon, and Muscoy. If you’re in one of those communities with a Ghost Controls opener fault, let us know where the gate sits and we’ll route a technician. See our Wrightwood service area coverage. For Ghost Controls clients east of Wrightwood, we also run Ghost Controls service in Calimesa and Ghost Controls service in Yucaipa. And if you want the full brand breakdown, that’s on our Ghost Controls sales & service page.

Book Your Ghost Controls Service in Wrightwood Today

We diagnose the actual failed component, on Ghost Controls and everything else we carry. If your gate won’t wake, stops short of the latch, or quit after the last snow, call (844) 703-6053 for a free estimate. We’ll come up the mountain, read what the conditions did to the opener, and fix the right fault, not the easy upsell.

Written by Nelson Pryce, Owner at Manor Gate Repair, serving Wrightwood, San Antonio Heights Ghost Controls service, and the San Gabriel Mountain communities.

Need Gate Repair help in Wrightwood? Licensed & insured · 30–60 min response · free estimates
Call (844) 703-6053
Areas We Serve

Request a Free Estimate in Wrightwood

Tell us what you need — Manor Gate Repair responds fast. No obligation.

By reaching out through this form, you acknowledge our Privacy Policy and authorize us to contact you by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch