Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Corona, CA
Gate installation in Corona means working with the land first. The city’s mix of mid-century tract homes near downtown and larger 1990s-2000s subdivisions in the south hills means we install everything from narrow manual side-yard gates to wide custom ornamental driveway gates, and the clay-heavy soil plus Santa Ana wind events shape how every post gets set. As a multi-brand gate specialist, Manor Gate Repair handles the full job from concrete work through final operator programming, so you’re not coordinating three different contractors. Call (844) 703-6053 for a free measure and written quote.
Why Corona Homes Are Different
Corona sits at the base of the Santa Ana Mountains, and that position drives a failure pattern most coastal Orange County installers rarely encounter. The region’s expansive clay and decomposed granite shift seasonally. A gate that swings freely in spring can bind or sag by late August, then heave again after the first soaking winter rains. In hillside subdivisions off the 91 and Foothill corridor, we routinely re-set and deepen post footings rather than simply adjusting hinges, because the post itself has moved.
The housing stock compounds this. Older downtown-area homes in 92882 often have narrower manually hung gates with worn hinge posts that have been patched for decades. The master-planned communities in the south hills, particularly 92883 and 92881, lean heavily on HOA-governed decorative iron and vinyl driveway gates. Those HOAs carry their own material and finish requirements, and we’re used to working within them. Then come the newer estates with wide custom ornamental gates, where wind load from Santa Ana gusts stresses the entire structure from hinges to operator.
Summer heat above 100°F expands metal, warps wood, and loosens hardware. Dry wind gusts push gates out of alignment and overload operators. The work here is as much about re-plumbing posts and hinges against soil and wind as it is about the gate hardware itself.
Styles & brands we work with
Our Main Corona Services
Most Corona homeowners call us for one of two reasons: an existing gate has stopped working correctly, or the electric drive system has failed. Here’s how each works.
Gate Repair in Corona
When a Corona gate starts dragging, sagging, or refusing to latch, the cause is usually the ground under the posts, not just the hinge. We see clay-related post heave in the south hills and wind-racked hinges along the foothill corridors every dry season. Our repair work covers re-setting posts, re-hanging leaves, replacing rollers and hinges, and correcting racked frames. We work on the brand you already have, whether it’s a Viking, DoorKing, Elite, or Ghost Controls system. Gate Repair in Corona covers pricing, specific repairs, and same-week scheduling.
Electric Gate Repair in Corona
Electric gate failures in Corona often trace back to two local culprits: heat-cycling on control boards and wind-driven strain on arms and sensors. When a LiftMaster or FAAC operator stops responding, our technicians diagnose the actual fault, whether that’s a board, a limit switch, a sensor, or a mechanical bind from a shifted post. We don’t push full replacements when a component-level repair restores the system to spec. Electric Gate Repair in Corona details diagnostics, common failures, and what repairs cost.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Corona
New gate installation in Corona rarely starts with the gate. It starts with the footings. The city’s shrink-swell clay and decomposed granite mean a post set too shallow or without proper drainage will move within a season, especially in the hillside subdivisions along the 91 and Foothill corridor where winter rains saturate the soil and summer heat bakes it back dry. Whether we’re installing an automatic driveway gate for a south Corona 92883 home or a manually hung side-yard gate for an older 92882 property, the concrete work has to be right before the hardware goes on. Manor Gate Repair is the Gate Installation specialist that handles excavation, footing depth, post plating, gate fabrication, operator mounting, and final programming as one continuous job.
Automatic Gate Installation
Signs you need it
A manual gate you’re tired of opening by hand, or an existing operator that’s failed and isn’t worth re-fitting onto an aging frame are the two most common starting points.
What it costs in Corona
Automatic gate installation in Corona typically ranges from $4,500 to $12,800, with final cost driven by gate width, material, and whether an operator was already on-site.
How we do it
We pour or re-pour the footing, set and anchor the posts, hang the gate on the operator’s torque path, mount the arm or slide motor, route power to the motor, and set and test the open/close limits with proper safety edges.
Gate Installation Services
Signs you need it
A deteriorated post, a rusted or twisted leaf, or a rebuilt yard are all reasons Corona homeowners replace rather than repair their gate.
What it costs in Corona
Full gate installation services in Corona typically range from $3,200 to $9,500 for a standard single driveway gate with hardware and installation.
How we do it
We remove the old gate and its hardware if present, prep and re-set the posts, hang the new gate with proper clearances, and adjust hinges to account for Corona’s seasonal soil movement.
Driveway Gate Installation
Signs you need it
Wide driveway openings that need a custom ornamental or sliding gate to secure the property line are the typical trigger.
What it costs in Corona
Driveway gate installation in Corona typically ranges from $4,500 to $16,500 depending on width, material, and whether automation is included.
How we do it
We survey the driveway’s grade and soil, pour deep footings with proper drainage, install the gate and operator, and program the full open-close loop against the property’s actual conditions.
Sliding Gate Installation
Signs you need it
Driveways too short for a swing gate radius, or lots with a grade too steep for a swing arc, are where a cantilever or track slide is the right fix.
What it costs in Corona
Sliding gate installation in Corona typically ranges from $5,500 to $14,800 for a cantilever or track sliding gate and operator.
How we do it
We install the rail or cantilever system, set the gate on it, mount and wire the operator, set the travel limits, and test catch and safety stop performance in both directions.
What Gate Installation Costs in Corona
| Item | Typical range in Corona |
|---|---|
| Driveway Gate Installation | $4,500 – $16,500 |
| Automatic Gate Installation | $4,500 – $12,800 |
| Sliding Gate Installation | $5,500 – $14,800 |
Do you handle the power run for automatic gates in Corona?
Yes. The power run to the operator is part of the installation, not something you’re left to coordinate with an electrician. We route everything from the panel to the motor, including the conduit, wiring, and final connection, so the gate works on day one.
What does the HOA require for a new gate in south Corona?
Most 92883 and 92881 subdivisions require pre-approval for material, finish, and height. We build to the HOA’s specification documents and can provide the drawings and material sheets they ask for. Call (844) 703-6053 and we’ll walk you through what your community needs.
Brands We Service in Corona
We service Viking, Ghost Controls, DoorKing, and Elite, among the full lineup of nine major gate automation brands we carry experience with. Common control boards, sensors, arms, and remote receivers are stocked for these systems, which keeps turnaround shorter than waiting on dealer-only parts. See our brands for the complete list and what we carry.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Corona, CA
| Service | Typical range in Corona |
|---|---|
| Gate Repair | $180 – $550 |
| Electric Gate Repair | $225 – $780 |
| Gate Installation | $3,200 – $9,500 |
| Automatic Gate Installation | $4,500 – $12,800 |
| Driveway Gate Installation | $4,500 – $16,500 |
| Sliding Gate Installation | $5,500 – $14,800 |
| Control Board Replacement | $250 – $650 |
| Sensor Replacement | $150 – $390 |
| Post Reset | $190 – $490 |
| Hinge Replacement | $160 – $420 |
In Corona, two things push a job toward the high end of its range: post footings that have been heaved by the clay and need re-pouring, and wide custom gates where wind load demands a heavier operator. Your price is quoted and agreed before any work starts, so the invoice never comes as a surprise.
Neighborhoods We Serve in Corona
We cover all four Corona ZIP codes: 92882, 92883, 92877, and 92878. That includes the older downtown core with its mid-century tract homes, the master-planned south hills with their HOA gates, and the newer estates near the foothills.
- South Corona (92882)
- Eagle Glen (92883)
- Dos Lagos (92883)
- Chase Ranch (92877)
- Corona Hills (92878)
We schedule service calls across the city most weekdays, with the earliest slots typically available for the 92882 and 92877 ZIP codes.
Service Area – Cities Near Corona
From our base serving Corona, we regularly take on gate work in the surrounding communities. That includes Home Gardens, CA, El Cerrito Corona, CA, Eastvale, CA, and Norco, CA. The same multi-brand approach and local soil knowledge applies across the whole area.
Serving Corona, CA — Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corona
We schedule repair calls by ZIP code throughout the week, and most Corona homes can be seen within a few business days. Emergency situations like a gate stuck open are prioritized. Call (844) 703-6053 and we’ll give you the first available window.
Most residential gate installations in Corona do not require a building permit, but HOA approval is frequently required in the south hills neighborhoods. We’re familiar with the community review process and can provide the documentation your HOA requests.
We serve all four Corona ZIP codes: 92882, 92883, 92877, and 92878. That includes the hillside subdivisions in the south, the older central neighborhoods, and the newer developments on the edges of the city.
If your gate is sagging, binding, or not responding, call (844) 703-6053. We’ll diagnose the fault, quote the work before anything starts, and restore your gate to the way it should operate in Corona’s soil and wind.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corona Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Megan Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer