Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fullerton, CA
Gate installation in Fullerton usually means rebuilding a wood driveway or alley gate that was hung decades ago on posts never set in concrete. We handle that, plus full automatic gate systems for the city’s older Spanish Revival homes and mid-century ranch tracts. The heat and Santa Ana winds here bake and warp wood while corroding hinges faster than coastal Orange County, so the work starts with the post and the footing, not the gate board. Call Manor Gate Repair at (844) 703-6053 for a free estimate on any gate project in Fullerton.
Why Fullerton Homes Are Different
Fullerton’s housing stock runs older than people expect. The blocks around downtown and the northside tracts are full of 1920s bungalows and Spanish Revival homes, most with detached garages and rear-alley access. Those alleys mean gates get daily use from vehicles, and many of the wood gates we see were built with posts surface-stuck in soil or nailed to a neighbor’s fence line. No footing, no steel post anchor, no concrete. The gate sags within a season no matter how many times the hinges get tightened.
The climate compounds it. Fullerton sits inland enough to catch the full force of Santa Ana wind events, and summer heat here runs hotter than coastal OC. That dry heat bakes wood gates and strips the moisture out, while fasteners and hinge barrels corrode from decades of morning fog and the occasional rainy season swell. Irrigated lawns and planting strips along older fence lines keep post bases damp year-round, which rots the buried section of a wood post from the inside. When we rebuild a Fullerton gate, we set the post in concrete below the rotted zone, or we pull it entirely and sleeve a steel post into the ground. The gate board itself is usually the easiest part to fix.
Across the 92832, 92833, 92834, and 92835 ZIP codes, the gate trade here is less about installing modern ornamental iron and more about restoring what’s already standing. That’s what we do.
Styles & brands we work with
Our Main Fullerton Services
When Fullerton homeowners call us, it’s almost always one of two situations: a sagging or broken gate that needs mechanical repair, or an automated gate that stopped responding to the remote or keypad. Both live under one roof here.
Gate Repair in Fullerton
Repair work in Fullerton typically starts with the post, not the gate leaf. We pull the hinge side back to plumb, rebuild or replace rotted posts, rehang the gate, and replace hinges, latches, wheels, and slide tracks as needed. On older alley gates with no concrete footing, we set a new post properly so the repair stays put through the next Santa Ana season. Most repair jobs here are wood gates on aging fence lines, and we quote the full scope before any work begins. See Gate Repair in Fullerton for the full breakdown.
Electric Gate Repair in Fullerton
Automated gates in Fullerton’s 1950s and 60s ranch tracts fail in predictable ways: control boards that cook in direct inland heat, photo eye sensors knocked out of alignment, capacitors that give out, and swing arm operators that strip gears against warped wood gates. We diagnose the actual fault on LiftMaster, DoorKing, Mighty Mule, Elite, and other major brands, then repair the component rather than pushing a full system replacement. Read Electric Gate Repair in Fullerton for details on what we test and what it costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fullerton
Most gate installation jobs in Fullerton are either a full replacement of a wood or steel driveway gate on an existing post, or a complete new automatic system at the end of a rear-alley driveway. The inland heat and Santa Ana winds here mean we size operators for the actual gate weight and wind load, not the cheapest arm in the catalog. A gate that’s under-powered in Fullerton will strip its gears by the second summer. For the complete scope of what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every time, or the existing operator has failed and parts are no longer available for it.
What it costs in Fullerton
Automatic gate installation in Fullerton typically runs from $2,800 to $9,500 depending on the operator type, gate weight, and whether new posts and a power run are required.
How we do it
We measure the gate leaf and existing posts, confirm the swing or slide direction, pull the operator and safety components, run and terminate power and control wiring, then program remotes, keypads, and travel limits before load-testing the full cycle.
Driveway Gate Installation
Signs you need it
Your driveway gate is rotted through, sagging past the point of repair, or you’re adding a gate where none existed and need a complete frame, posts, and hardware package.
What it costs in Fullerton
Driveway gate installation in Fullerton typically runs from $1,800 to $6,500 for a new wood or steel gate leaf hung on properly set posts, with the higher end reflecting wider openings and automation.
How we do it
We demo the old gate, set new posts in concrete below the rot line, build or order the gate leaf to the opening width and height, hang it with heavy-gauge hinges, and install the latch, stops, and any rollers or track required.
Sliding Gate Installation
Signs you need it
You have a wide driveway opening where a swing gate would block the street or sidewalk, or the existing slide track has failed and the gate binds every time it moves.
What it costs in Fullerton
Sliding gate installation in Fullerton typically runs from $3,200 to $10,000 depending on gate length, track condition, and whether we’re adding a new operator and safety edges.
How we do it
We set the track on a level concrete pad or steel channel, hang the gate with proper roller spacing, install the rack and pinion or chain drive, and wire the operator with safety edges and photo eyes before testing the full open-close cycle.
What Gate Installation Costs in Fullerton
| Item | Typical range in Fullerton |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,800 – $9,500 |
| Sliding gate installation | $3,200 – $10,000 |
How long does gate installation take in Fullerton?
Most gate installations in Fullerton run one to two days for a standard wood or steel driveway gate. Full automatic systems with new posts, conduit, and power runs typically take two to three days including programming and load testing.
Do you handle the full gate installation including power and safety sensors?
Yes. We run the power line from the panel to the operator, install photo eyes, safety edges, and keypads, and program all remotes. Nothing gets handed off to a second contractor.
Brands We Service in Fullerton
We service DoorKing, Elite, Mighty Mule, and LiftMaster automated gate systems across Fullerton, plus most other major control boards and operators. Common boards and safety components are stocked on our trucks so most electric gate repairs in Fullerton finish in a single visit. See our brands for the full list of systems we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fullerton, CA
| Service | Typical range in Fullerton |
|---|---|
| Gate repair | $140 – $390 |
| Electric gate repair | $180 – $650 |
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,800 – $9,500 |
| Sliding gate installation | $3,200 – $10,000 |
What pushes a Fullerton gate job up is usually the post. If the existing post is rotted, surface-stuck, or set without concrete, the repair price includes digging and setting a new one, and that’s the single biggest variable we see on older alley gates in 92832 and 92835. Every job is quoted and agreed in writing before work starts, so there’s no surprise on the invoice.
Neighborhoods We Serve in Fullerton
We work throughout Fullerton, including the older downtown blocks, the ranch tracts north of Chapman, and the postwar housing in the southern half of the city. Most of our gate calls cluster where the housing is oldest and the alley access puts gates under daily vehicle use.
- Downtown Fullerton
- Sunny Hills
- Raymond Hills
- Fullerton Creek
- North Fullerton
We schedule most Fullerton gate repairs within one to two business days, with same-day service often available for emergency gate failures that leave a driveway or property unsecured.
Service Area – Cities Near Fullerton
From Fullerton, we route technicians into the surrounding north Orange County cities for gate repair and installation. We regularly serve Anaheim, CA, La Habra, CA, Placentia, CA, and Brea, CA, with the same multi-brand service and upfront pricing.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fullerton
We keep repair technicians routed through north Orange County during the week, so most Fullerton gate failures can be reached same day or next morning. Call (844) 703-6053 and we’ll give you a real arrival window, not a four-hour range.
Most residential gate replacements and operator swaps don’t require a city permit in Fullerton, but new electrical runs from the panel to a gate operator may need one depending on the specific setup. We’ll tell you during the estimate if your job needs a permit and who pulls it.
Yes. We cover all four Fullerton ZIP codes, 92832, 92833, 92834, and 92835, from the older downtown blocks and northside alleys out to the eastern ranch tracts. There’s no upcharge for any neighborhood in the city.
Call Manor Gate Repair at (844) 703-6053 for a free estimate on gate installation, repair, or electric gate work in Fullerton. The price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fullerton Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Megan Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer