Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Claremont
Gate repair in Claremont usually comes down to one of two problems: a hinge post that’s out of plumb, or a panel that’s settled, rotted, or cracked. We get called to both, often on the same gate. Our team knows the older Craftsman lots near the Village, the ranch homes off Indian Hill Boulevard, and the wider acreage properties where the 91711 ZIP meets the foothills. We stock common hardware for the brands already on your property, and most repair calls in Claremont are quoted, approved, and completed without replacing the whole gate. Call (844) 703-6053 for a free estimate.
Why Manor Gate Repair Is Claremont’s Preferred Gate Repair Company
We’re not a handyman service that occasionally hangs a gate. Manor Gate Repair is led by Nelson Pryce, and our work in Claremont has always been about restoring what’s already on the property rather than pushing a system swap. Homeowners around the Claremont Colleges call us because their gates are attached to houses built in 1910 or 1920, and those gates need to look right, not just work right. That’s the standard we hold to.
Our team carries parts and fasteners sized for the older hardware you find here: heavy strap hinges, mortise latches, and ornamental iron strapwork that is no longer produced. When a Claremont homeowner asks whether a wobbly post can be saved, we answer from experience with local soil, root systems, and historic framing – not from a national pricing chart. That’s the difference property managers and HOAs in Claremont notice.
Styles & brands we work with
Wood Gate Repair in Claremont
Wood Gate Repair in Claremont means working with fir, cedar, and redwood gates that may have been built before the first tract homes arrived in the foothills. The first thing we check is the post. On older Claremont lots, a gate that drags is usually not a panel problem – it’s a footing problem. Roots from mature pepper and oak trees have lifted the hinge post just enough to throw the panel out of square. Replacing pickets without fixing that post means the new boards will scrape the same ground within a season.
Typical wood gate repairs in Claremont run between $140 and $380 for board replacement, hinge tightening or replacement, and latch alignment on a standard swing gate. Wider driveway gates and arbor gates with custom spacing cost more, usually $300 to $700, because the boards must be matched to the original dimensions rather than bought off the shelf.
Post Re-Setting and Realignment
We pull the post, inspect the existing footing, and re-pour it clear of the roots that caused the movement. On historic properties where the original post is worth preserving, we brace and secure it in place rather than replacing it. The goal is a gate that swings level again without changing the character of the entry.
Board and Picket Matching
Older wood gates near the Colleges often use boards that are no longer milled. We match the species, width, and cut as closely as current lumber allows, then age the finish so the repair doesn’t stand out. This is standard work for us on Craftsman and period-revival homes.
Driveway Gate Repair in Claremont
Driveway Gate Repair in Claremont covers a spread of property types: narrow single-car gates behind Vine Street bungalows, wide double-swing gates on Mills Avenue estates, and long slide gates on acreage east of Towne Avenue. The failure pattern changes with the gate. Swing gates here fail at the hinge post and the latch, while slide gates wear rollers and chain after years of dust and debris from the foothill winds.
Driveway repairs in Claremont typically run $250 to $650 for swing gate work, and $300 to $800 for slide gates that need roller, chain, or track service. If the operator has also failed, the cost goes higher, usually into the $700 to $1,400 range once the control board or motor is diagnosed. We quote the full number before any work starts.
Swing Gate Sag and Drag
Claremont’s mature trees and dry summers conspire against wooden swing gates. The panel dries and lightens while the post shifts in the soil, so the latch misses by half an inch more each year. We correct the post and re-hang the panel so the lock catches cleanly again.
Slide Gate Track and Roller Service
On wider properties, slide gates take the brunt of dust and Santa Ana winds. Our techs clean and re-seat rollers, straighten bent track sections, and re-lubricate the drive chain. We also check the operator’s travel limits so the motor isn’t fighting a gate that’s binding mid-span.
Trusted Brands We Service in Claremont
We work on the brand you already have. That includes DoorKing, Elite, Mighty Mule, and LiftMaster, among the nine major gate automation brands we service. We don’t need to sell you a new opener because the old one isn’t a brand we carry. Our techs diagnose the actual fault – a control board, a capacitor, a sensor – and repair it. For Claremont customers, we keep common lift components and safety accessories in local stock, which cuts turnaround on automatic gate repairs compared to ordering from a distributor.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Claremont Homes
- Root-heaved hinge posts under pepper and oak trees. This is the most common Gate Repair we do in Claremont, especially in the historic core around the Colleges. The post shifts, the panel sags, and the latch stops catching – even though the wood panel itself is still solid.
- Dry-rot and swelling in original wood pickets. Hot, dry summers crack century-old boards, and winter rains swell them. The cycle eventually loosens fasteners and splits boards at the hinge and latch line.
- Settled gate posts on long rural driveways. Properties east of Towne Avenue and up toward San Antonio Heights deal with wider spans and heavier panels. Santa Ana winds load the post sideways until it leans, and then the whole gate starts to scrape.
- Operator and safety sensor failures on automatic gates. Dust from the foothills gets into photo eyes and limit switches. Entrapment protection faults are the usual symptom – the gate refuses to close or reverses without warning.
Pricing for Gate Repair in Claremont, CA
Most Claremont gate repairs fall between $140 and $800, depending on the gate type and what failed. Wood picket and latch repairs start around $140 to $380. Driveway swing gate work runs $250 to $650. Slide gate and operator repairs run $300 to $1,400. The bigger number includes diagnosing the control board or motor. We tell you the price before any work starts, and the estimate is free. There’s no charge to come out, look at the gate, and tell you what it needs. Call (844) 703-6053 and we’ll set a time.
We Also Serve Cities Near Claremont
Our team regularly works in Montclair, La Verne, Upland, and San Antonio Heights, so if your property sits on the edge of Claremont or you manage multiple locations, we can cover the whole corridor. For a closer look at what we do, see our Gate Repair page or learn more about Gate Repair in Claremont.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Claremont
On Claremont properties with mature trees, the hinge post is usually the culprit. Pepper and oak roots lift the post, and the panel only appears to sag because the post has moved. We diagnose the footing first. Call (844) 703-6053 and we’ll confirm which one it is before quoting the repair.
Yes. We install and repair solar-charged operators for gates where running conduit isn’t practical. The system needs a correctly sized panel, battery, and operator, and we spec all three for the gate’s weight and daily cycle count.
The photocell should stop and reverse the gate whenever something blocks the beam while the gate is closing. If it doesn’t, the sensor is misaligned, dirty, or failed. This is a safety issue, not a convenience one – we recommend a trained professional test and correct it rather than bypassing the circuit.
Yes. On a Craftsman property near the Claremont Colleges, our tech re-fitted replacement pickets to match century-old originals after correcting a root-heaved hinge post. We match species, width, and cut, then age the finish so the repair blends with the original wood.
We repair both slide and swing gates on wide farm entrances, and we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Brand doesn’t limit the diagnosis. Call (844) 703-6053 for a free estimate on your gate.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving Claremont and the surrounding foothill communities.