Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Phelan, CA
Gate installation in Phelan means working with high-desert wind, sand, and wide rural driveways, not the ornamental pedestrian gates you see in city neighborhoods. We install heavy-duty driveway, ranch, and automatic gates built for multi-acre lots and equestrian properties across the 92329 and 92371 ZIP codes. Whether you need a new sliding gate on a long dirt driveway or an electric operator that will survive Phelan winters, we quote the full job before any work starts. Call Manor Gate Repair at (844) 703-6053 for a free estimate.
Why Phelan Homes Are Different
Phelan sits at roughly 3,500 to 4,000 feet in the Mojave high desert, and the gate work here reflects that elevation. Intense summer sun bakes powder coating and UV-degrades operator housings. Frequent high-wind events push gates against their stops, stress hinge welds, and strip lubricant from rollers within a single season. Winter overnight freezes cause frost heave that shifts gate posts by half an inch or more, which is enough to bind a sliding gate or throw off a photocell alignment. Blowing sand and grit pack into sliding gate tracks and seize bearings faster than anywhere in the Inland Empire lowlands.
The housing stock compounds it. Phelan is dominated by rural residential parcels, manufactured homes on multi-acre lots, custom ranch houses, and equestrian setups with metal pipe corrals and tube gates. Most driveways are long, wide, and unpaved, which means the gates themselves are bigger and heavier than suburban swing gates. We regularly find older gates carrying years of improvised repairs, mismatched hinges, and hardware that was never rated for the wind load. On the west side near the Baldy Mesa drainage, winter runoff can undermine gate posts, so a gate that worked fine in September may be leaning and out of square by March. Installation and repair here requires knowing how the desert affects every component, not just swapping parts.
Styles & brands we work with
Our Main Phelan Services
Most Phelan homeowners call us for one of two things: a gate that has stopped working mechanically, or an automated system that has stopped responding. Here is how each plays out in this part of the high desert.
Gate Repair in Phelan
Gate repair in Phelan usually starts with wind damage, sand-worn rollers, or a post that frost heave has moved out of alignment. We work on heavy ranch gates, tube gates, and driveway gates that other companies will not touch because they were never installed square in the first place. Our team diagnoses the actual fault, whether it is a snapped hinge, a bowed leaf, or hardware that was undersized for the gate from day one. For full detail on what we fix and what it costs, see Gate Repair in Phelan.
Electric Gate Repair in Phelan
Electric gate repair in Phelan is its own specialty because the desert kills operators in predictable ways: UV-crazed plastic housings, sand in the gear train, and control boards that fail after a summer of 100-degree heat inside a metal cabinet. We diagnose control boards, limit switches, safety sensors, and motors across all major brands rather than telling you the whole system needs replacing. For the full scope of our electric repair work, see Electric Gate Repair in Phelan.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Phelan
Gate installation in Phelan has to account for wind loads, long rural driveways, and posts set in soil that freezes and heaves every winter. We do not install the lightweight ornamental gates you might find in a tract-home community; we install ranch gates, wide driveway gates, and automated systems that will hold up under Mojave conditions. And because we also do repair and electric work, we build from the start with the operator, track, and hardware choices that will reduce problems five years out. Many Phelan customers have never had a gate built to spec, only modified repeatedly, and the difference in how a properly set post and correctly sized operator perform is immediate. Here is the full scope of installation work we handle in Phelan, from Gate Installation through the sub-jobs below.
Automatic Gate Installation
Signs you need it
You are opening and closing a heavy gate by hand every time you leave the property, or you have a dated operator that cannot handle a multi-acre driveway’s gate weight and wind exposure.
What it costs in Phelan
Automatic gate installation in Phelan typically runs $1,500 to $6,500 depending on gate length, operator type, and whether power needs to be run to the post.
How we do it
We set or reinforce the posts, hang and square the gate, mount the operator, run power and control wiring, then program travel limits, safety edges, and remotes and test full open/close cycles in the wind.
Driveway Gate Installation
Signs you need it
Your current gate is too narrow for delivery trucks or horse trailers, sags on its hinges, or was built from lighter material than a long Phelan driveway with high-wind exposure demands.
What it costs in Phelan
Driveway gate installation in Phelan ranges from $500 to $1,500 for a manual single gate and $2,000 to $8,000 for a full automated driveway system.
How we do it
We measure the opening and approach angle, recommend a sliding or swing design for your driveway’s grade and wind direction, set posts below frost depth, and hang the gate with hardware rated for its actual weight.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward or inward enough that a swing gate would bind or catch wind, or you need a gate that will not swing into a corral, parking area, or drainage swale.
What it costs in Phelan
Sliding gate installation in Phelan typically costs $1,500 to $5,000 depending on gate width, track length, motor rating, and whether the ground needs concrete and steel work first.
How we do it
We set the track and foundation with allowance for sand and runoff, hang the gate with the correct roller clearance, mount and wire the operator, and set the limits and reversing safety.
What Gate Installation Costs in Phelan
| Item | Typical range in Phelan |
|---|---|
| Manual single gate | $500 – $1,500 |
| Automatic gate (full system) | $2,000 – $8,000 |
| Sliding gate with operator | $1,500 – $5,000 |
Does a Phelan gate installation need a permit?
Most rural Phelan gate installs on private property do not require a permit, but any gate within a county easement or near a drainage course may. We check your specific site before we quote, and tell you plainly if county approval matters for your project.
How long does a Phelan gate installation take?
Most single driveway gate installs take one to two days. Sliding gates needing a concrete track foundation may take three to four days because the concrete must cure before the gate is hung and the operator is set. Call (844) 703-6053 for a schedule based on your specific opening.
Brands We Service in Phelan
We work on the brand you already have. That includes DoorKing, Elite, Mighty Mule, and LiftMaster, plus the rest of the common automation names found on Phelan gates. Because we carry parts for multiple brands and know each one’s control logic, most repairs are completed in one visit rather than spread across two or three trips. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Phelan, CA
| Service | Typical range in Phelan |
|---|---|
| Manual single gate installation | $500 – $1,500 |
| Automatic gate installation (full system) | $2,000 – $8,000 |
| Sliding gate installation with operator | $1,500 – $5,000 |
| Gate opener motor replacement | $400 – $1,200 |
| Control board replacement | $300 – $800 |
| Safety sensor replacement | $150 – $350 |
| Hinge replacement (heavy gate) | $150 – $450 |
| Gate track realignment or replacement | $250 – $750 |
| Gate post reset after frost heave | $350 – $900 |
| Weld repair on ranch or tube gate | $100 – $400 |
In Phelan, the things that push a job up are gate weight, wind exposure, post condition, and how far power needs to travel to reach the operator. Every job is quoted upfront, in writing, before any work begins, so you will not get a surprise invoice after the gate is back in service.
Neighborhoods We Serve in Phelan
We cover the full Phelan area, from the older lots near Sheep Creek Road east through the larger parcels off of Johnson Road and down toward the 138 corridor. Our crews are in Phelan multiple days per week, so response is typically same week for repairs and one to two weeks for planned installations.
- Phelan town center and Sheep Creek Road
- Johnson Road and surrounding parcels
- Baldy Mesa area
- West Phelan near the drainage
- Properties along Highway 138 and east Phelan
Service Area – Cities Near Phelan
Manor Gate Repair serves Phelan and the surrounding high-desert communities. We commonly work in Piñon Hills, CA, Wrightwood, CA, Oak Hills, CA, and Hesperia, CA. Each of those areas has its own gate challenges, from mountain snow loads in Wrightwood to the wind corridors running through the Cajon Pass side of Oak Hills.
Serving Phelan, CA — Our Local Coverage Area
We’re based in the Phelan area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Phelan
For a gate stuck open, stuck closed, or a repair that leaves the property unsecured, we can typically reach Phelan the same day or the next business morning. We keep Phelan on our regular routing schedule, so emergency calls are not routed from a distant dispatch desk but from crews already working the high desert.
Some Phelan properties fall within HOAs or equestrian lot agreements that have height, color, or setback rules for gates. We have installed enough gates in the area to know which questions to ask. Bring us your HOA sheet, and we will make sure the install meets it before we start.
Yes. Most Phelan ranches have existing fences, corral gates, or a second entry that a new gate should match. We can match material, height, and finish closely enough that the new gate looks like it belongs on the property. Call (844) 703-6053 and we will talk you through the options.
When your gate needs to hold up against Phelan wind, sand, and freeze cycles, call Manor Gate Repair at (844) 703-6053. We will assess the gate, explain what is actually wrong, and give you a written price before the first part comes off the truck.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Phelan Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta