Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pomona, CA
Gate installation in Pomona means working with homes built between the 1920s and 1970s, where wide driveway aprons, side-yard RV access, and settled piers on sloping lots are the rule rather than the exception. Manor Gate Repair handles the full gate lifecycle here, from rebuilding tired iron swing gates on original posts to installing new automated systems sized for Pomona’s deep lots and heat-cycling climate. If you need a gate that actually fits your property and holds up to Pomona Valley summers, call (844) 703-6053 for a free estimate.
Why Pomona Homes Are Different
Pomona’s housing stock runs older and more varied than most of the Pomona Valley. The core neighborhoods around Lincoln Park and the historic districts mix 1920s bungalows with Spanish-style stucco homes, while the east side and areas like Phillips Ranch reflect post-war tract building into the 1970s. Many of these properties still carry their original driveway gates or gate piers, and decades of soil settlement on Pomona’s sloping lots have left a lot of piers leaning and hinges wallowed out.
The climate does its share too. Pomona sits in a hot, dry valley east of Los Angeles, and the intense summer sun cooks paint off iron gates and dries out wood until it cracks. Santa Ana wind events add sudden stress that loosens hardware and shifts gate leaves. Then winter rains arrive and find every rusted seam and settled post, which is why so many Pomona gates sag and drag after a wet spell. A technician who knows Pomona checks the pier first, because the failure usually starts in the ground, not in the gate itself.
Styles & brands we work with
Our Main Pomona Services
Homeowners and property managers in Pomona call us most often for two things: getting an existing gate working again, and sorting out the electric and automated side of a system that has stopped responding. Both services are handled by the same team, so the diagnosis is consistent whether the problem is mechanical, electrical, or a combination of the two.
Gate Repair in Pomona
Most Pomona gate repairs we see involve heavy steel and wood swing gates on older piers where the hinges have pulled loose and the gate has started dragging. The heat and dry summers loosen hardware, and the winter rains finish the job. We work on the gate and the pier it hangs from, so the repair actually holds through the next season. For details on local repair work, see Gate Repair in Pomona.
Electric Gate Repair in Pomona
Pomona has a surprising number of automated gates on older properties, and a lot of them were retrofitted to piers and gate leaves that were never designed for a motor. When an operator on a settled pier burns out or a sensor starts false-triggering, the fix usually requires understanding both the electronics and the physical gate it is moving. Manor Gate Repair is an automated gate specialist, not a general handyman. For the electric side, see Electric Gate Repair in Pomona.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pomona
Gate installation in Pomona is rarely a drop-in job. The older lots are deep, the driveways are wide, and the piers are often original stucco-and-CMU work that has settled over decades. A new gate has to be sized for the actual opening, anchored to piers that can carry the load, and built to handle Pomona’s dry heat, Santa Ana winds, and wet winters without warping or loosening within a couple of seasons. We measure, quote the full job in writing before any work starts, and build the gate to spec. Our full installation service is covered on the Gate Installation page.
Driveway Gate Installation
Signs you need it
The existing gate no longer opens fully across the driveway, the posts are cracked or leaning, or the gate is patched and re-welded to the point that it costs more to keep repairing than replacing.
What it costs in Pomona
Driveway gate installation in Pomona typically runs $1,500 to $12,000 depending on gate size, material, operator, and whether the piers need to be rebuilt or re-anchored.
How we do it
We measure the driveway opening and check the piers for settlement, then fabricate and hang the gate, set the hinges and latch for a clean swing or slide, and adjust the alignment before turning the job over.
Automatic Gate Installation
Signs you need it
You want the driveway gate to open from the car without getting out, or the existing manual gate is heavy enough that automating it makes sense instead of replacing it.
What it costs in Pomona
Automatic gate installation in Pomona typically ranges $2,000 to $15,000 including the operator, control board, safety edges or photo sensors, and the electrical work needed to power the system.
How we do it
We install the operator and control board, run and connect the power, mount the safety edges and photo eyes, then set the open and close limits so the gate travels smoothly and reverses correctly on obstruction.
Note: automatic gate operators involve electrical wiring and motorized moving parts. Installation and electrical connection should only be done by a trained professional. Improper wiring or missing safety sensors can create a serious hazard.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your property has limited swing clearance, so a sliding gate that travels along the fence line fits the site better than a swing gate.
What it costs in Pomona
Sliding gate installation in Pomona typically runs $3,000 to $15,000 depending on gate length, track or cantilever hardware, and whether the operator is included.
How we do it
We set the track or cantilever rollers on a concrete or steel base, hang the gate so it rolls level, install the operator and rack, and tune the travel limits and safety stops.
What Gate Installation Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Driveway gate (manual, steel or wood) | $1,500 – $8,000 |
| Automatic gate with operator and controls | $2,000 – $15,000 |
| Sliding or cantilever gate system | $3,000 – $15,000 |
Do I need a permit to install a gate in Pomona?
Most residential gate replacements that keep the same piers do not require a permit in Pomona, but new piers, electrical work for an operator, or changes to driveway access can trigger building or electrical review. We can tell you what applies to your specific property during the estimate.
How long does a gate installation take in Pomona?
Most manual driveway gates are measured, built, and installed within two to three weeks. Automated gates usually take three to five weeks because the operator, controls, and electrical work add steps. The exact timeline depends on whether piers need work.
Brands We Service in Pomona
We work on the brand you already have. That includes DoorKing, LiftMaster, Elite, and Mighty Mule operators, among the nine major gate automation brands we carry parts and diagnostic familiarity for. If the board has failed or the motor is done, we can usually source the replacement locally and get your Pomona gate running again without pushing a full system swap. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pomona, CA
| Service | Typical range in Pomona |
|---|---|
| Diagnostic service call | $75 – $150 |
| Weld repair, steel gate | $150 – $400 |
| Hinge replacement or re-anchoring | $200 – $600 |
| Gate wheel or roller replacement | $150 – $350 |
| Operator replacement (electric gate) | $900 – $2,200 |
| Control board replacement | $400 – $1,100 |
| Safety sensor or photo-eye replacement | $200 – $500 |
| Driveway gate installation | $1,500 – $8,000 |
| Automatic gate installation | $2,000 – $15,000 |
| Sliding gate installation | $3,000 – $15,000 |
In Pomona, the biggest price drivers are pier condition and lot slope. Gates hung on settled stucco-and-CMU piers take longer to correct than a simple hinge swap, and sloped driveways often need more adjustment to get a clean swing or slide. Whatever the job, we quote the full price in writing before any work begins, and that price is what you pay.
Neighborhoods We Serve in Pomona
Manor Gate Repair has served Pomona since 2014, and we cover the full city, from the older housing around Lincoln Park and the historic core to the mid-century tracts and newer lots across the east side. We also work the commercial gate and contractor-yard properties along Holt and Mission.
- Lincoln Park
- Phillips Ranch
- Westmont
- Pomona Historic Core
- North Pomona
For most repair calls in Pomona, we schedule within a day or two of your call, and emergency gate failures are handled as quickly as the schedule allows.
Service Area – Cities Near Pomona
Manor Gate Repair is based in Fontana and works throughout the eastern Los Angeles County and western Inland Empire corridor. In addition to Pomona, we regularly serve La Verne, CA to the north, Claremont, CA just across the city line, Montclair, CA to the east, and Los Serranos, CA in the Chino Hills area. If your property sits near one of those borders, call and we will confirm coverage.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pomona
Yes. Manor Gate Repair has served Pomona since 2014 and dispatches technicians to the city regularly. Repair calls are typically scheduled within a day or two, and we carry the common operators, boards, hinges, and rollers needed to finish most jobs in one visit.
Some Pomona HOAs have rules about gate height, material, and color, and a few require approval before installation. We recommend checking your HOA’s architectural guidelines before ordering a new gate, and we can build to the approved spec once you have it.
We cover the entire city of Pomona, including the 91766, 91767, 91768, and 91769 ZIP codes, plus the unincorporated areas nearby. That includes residential neighborhoods, multi-family properties, and commercial and yard properties along the Holt and Mission corridors.
If your gate is sagging, stuck, or refusing to open, call Manor Gate Repair at (844) 703-6053. We will send the right technician, diagnose the actual fault, and quote the fix before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pomona Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta