Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Placentia, CA
Gate installation in Placentia usually means working around mid-century ranch homes, narrow side yards, and HOAs with firm rules about what can face the street. Most of the gates here were hung when these tracts were built in the 1950s through 1970s, and many are now sagging on settled block walls or rusting at the hinges. Manor Gate Repair has served Placentia since 2014, and we handle everything from a rebuilt wrought-iron side gate to a new automated driveway gate. Call (844) 703-6053 for a free estimate.
Why Placentia Homes Are Different
Placentia’s old grove-era identity still shapes its housing stock. The orange groves were subdivided into dense tracts between the 1950s and 1970s, which means most properties sit on compact lots with narrow side yards and low block-wall property lines. The original gates from that era are still in place on many homes: wrought-iron driveway gates with worn hinges, wood side gates that have dried and warped through decades of Santa Ana wind seasons.
The Santa Anas are the big recurring factor. Hot, dry winds pull moisture out of wood gates every fall, which leads to warping, cracked stiles, and hardware that shifts out of alignment. The occasional winter rain then does its work on the older wrought iron, especially where rust has already started at the welds and hinge points. In the grove-era tracts off the old downtown, we regularly find gates hung on original 1950s block walls that have settled and cracked. The gate sags even when the hardware is sound because the post itself has moved. That diagnosis comes up constantly in Placentia and far less often in newer neighboring cities.
HOA and city front-yard setback rules also drive a lot of the work here. Because Placentia is a dense suburban bedroom community, screening rules often dictate gate height, style, and setback from the street. Repair work has to respect those rules, which is why we restore existing gates to spec rather than pushing replacements that would trigger a new review.
Styles & brands we work with
Our Main Placentia Services
Most Placentia homeowners call us for one of two reasons: a gate that no longer opens or closes properly, or an electric system that has stopped responding. Both are covered below.
Gate Repair in Placentia
The bulk of gate repair in Placentia is mechanical: sagging hinges, rusted hardware, warped wood panels, and posts that have shifted out of plumb on settled block walls. We rebuild the gate in place where possible, re-plumb posts when the wall has moved, and treat rust before it compromises the frame. Many of these gates are original to 1950s and 1960s homes, so the work is about extending their life, not swapping them out. Read the full breakdown on our Gate Repair in Placentia page.
Electric Gate Repair in Placentia
Electric gate repair in Placentia is a different animal. The dry heat and Santa Ana dust get into control boards, sensors, and operator arms, and the occasional rain finds its way into buried conduit. We diagnose the actual fault, whether it’s a failing capacitor, a misaligned photo eye, or a limit switch that’s drifted. We work on the brand you already have rather than steering you toward a full system replacement. Details are on our Electric Gate Repair in Placentia page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Placentia
Gate installation in Placentia often means working with narrow side yards, block walls that have settled, and HOAs that require approval before anything new faces the street. The right install accounts for the Santa Ana wind load, the existing wall condition, and the setback rules before the first post goes in. We quote the job, you approve the price, and work starts only after both of us agree on the scope. For the full-service breakdown, visit our Gate Installation hub.
Automatic Gate Installation
Signs you need it
You want driveway security without getting out of the car, or your existing manual gate has become too heavy to swing comfortably on its hinges.
What it costs in Placentia
Automatic gate installation in Placentia typically runs $4,500 to $9,500 for a complete system with operator, safety edges, and controls.
How we do it
We set or re-plumb the posts, hang the gate, mount the operator, run the low-voltage wiring, install the safety sensors, and program the remotes and keypad before testing the full open-close cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted, sagging, or too narrow for a second vehicle, or you simply have no gate and want to control access to the property.
What it costs in Placentia
A new driveway gate in Placentia, installed and adjusted, usually falls between $2,500 and $6,000 depending on width, material, and whether automation is added.
How we do it
We measure the opening, check the existing posts and wall condition, fabricate or order the gate to fit, set the hinges, and adjust the swing or slide so it operates cleanly from day one.
What Gate Installation Costs in Placentia
| Item | Typical range in Placentia |
|---|---|
| Manual driveway gate (wrought iron or steel) | $2,500 – $6,000 |
| Automatic gate system with operator and safety | $4,500 – $9,500 |
| Wood side-yard gate (custom built and hung) | $1,200 – $3,500 |
Do I need HOA approval for a new gate in Placentia?
Usually yes. Placentia’s front-yard setback and screening rules, plus most HOA covenants, require design review before a new gate goes in. We can provide the measurements and drawings your board or management company asks for.
How long does a gate installation take in Placentia?
Most Placentia installations take one to two days on site, depending on whether the posts can be reused, whether concrete work is needed, and whether the gate is automated. Custom fabrication adds lead time before install day. Call (844) 703-6053 and we’ll give you a clear schedule.
Brands We Service in Placentia
Manor Gate Repair carries parts and diagnostic knowledge for the brands Placentia homes most often have in place: DoorKing, Elite, Mighty Mule, and LiftMaster. We stock common boards, sensors, and remotes, which keeps most turnaround to days rather than weeks. See our brands page for the full nine-brand list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Placentia, CA
| Service | Typical range in Placentia |
|---|---|
| Gate repair (minor: hinge, latch, alignment) | $275 – $600 |
| Gate repair (major: frame rebuild, post re-set) | $700 – $1,800 |
| Electric gate repair (board, sensor, or operator) | $325 – $850 |
| Control board replacement | $450 – $950 |
| Operator arm or motor replacement | $650 – $1,400 |
| Safety sensor or photo eye repair | $175 – $350 |
| Manual driveway gate installation | $2,500 – $6,000 |
| Automatic gate installation (complete) | $4,500 – $9,500 |
| Wood side-yard gate (custom built and hung) | $1,200 – $3,500 |
Placentia prices run toward the upper end of these ranges when the original 1950s block wall has settled and the post needs to be re-plumbed before any new hardware goes on. Every price is quoted and agreed before work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Placentia
We work across both Placentia ZIP codes, 92870 and 92871, from the older grove-era tracts near the old downtown to the newer infill pockets on the city’s edges. The mix of housing types means we see everything from original wrought iron on 1950s ranch homes to newer vinyl and aluminum gates on townhome and condo properties.
- Old Downtown Placentia and the surrounding grove-era tracts
- Placentia Champions neighborhoods north of Yorba Linda Boulevard
- The Atwood area near the 57
- Condo and townhome communities along Kraemer Boulevard
- Newer infill developments in the east and northeast sections of the city
Most Placentia repair calls can be scheduled within a few days, and we quote the job before any work begins.
Service Area – Cities Near Placentia
Manor Gate Repair also covers the surrounding north Orange County cities. For gate work in Brea, CA, we’re a short drive and handle the same range of mechanical and electric repairs. Our team serves Anaheim, CA for properties with heavier traffic and more commercial-style gate systems, and Fullerton, CA for homes of similar vintage to Placentia’s grove-era tracts. We also cover Yorba Linda, CA, where the larger lots bring a different set of driveway gate requirements.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Placentia
Most Placentia repair calls can be scheduled within a few business days. We do not promise same-day dispatch for installation or measurement work; that work is scheduled properly. Call (844) 703-6053 and we’ll give you a straight answer on timing.
We provide the technical drawings and specifications your HOA or the City of Placentia asks for. The application and approval process sits with you as the property owner, but we’ll make sure the documents are complete and accurate so review moves without back-and-forth.
In many Placentia tracts, yes. Front-yard screening and setback rules often specify height, material, and style ranges. We build and install within those parameters and can match an existing design if your HOA requires a uniform streetscape. The right fix, not the easy upsell.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Placentia Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Carrie Hoffman"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller