Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Claremont
Electric gate repair in Claremont usually comes down to one of three things: a control board that’s given up after years of heat, a hinge post that’s drifted out of plumb from tree roots, or a safety sensor that’s lost its alignment. We fix all three, and we do it without telling you to rip out a gate that just needs the right repair. Most Claremont calls we handle are scheduled within 48 hours, and we carry parts for the brands already installed on your property. If your gate is stuck, beeping, or reversing for no reason, call us at (844) 703-6053 and we’ll diagnose it properly.
What’s different about Claremont is the age of what we work on. This is a city of 1920s Craftsman bungalows and period-revival homes around the Colleges, and the electric gates here were often retrofitted onto gates that are older than the operators themselves. We’re comfortable with that combination. A 1990s operator on a 1920s gate is a Cleveland High School sidestreet situation, not a Rancho Cucamonga tract-home situation. That’s precisely the work Manor Gate Repair is built for.
Why Manor Gate Repair Is Claremont’s Preferred Electric Gate Repair Company
Manor Gate Repair is led by Nelson Pryce, and our approach to electric gate repair in Claremont is simple: diagnose the actual fault, repair what can be repaired, and tell you straight when replacement is the cheaper long-term answer. We work on nine major gate automation brands including LiftMaster, DoorKing, Elite, and Mighty Mule. That matters in Claremont specifically because the housing stock spans a century, and no two gates have the same operator history. A single-brand dealer will look at your old FAAC board and tell you it’s time for a full system swap. We’ll source the board.
Our Electric Gate Repair team gets called into Claremont for the same reasons, year after year. Legacy control boards that fail in attic-like heat. Posts that went out of plumb a decade ago and finally killed the operator. Wood gates that dried and warped during a Santa Ana and now drag against the sensor beam. We measure our work by whether the gate opens cleanly six months later, not by whether it opened on the day we left. That’s the standard behind the Manor name.
Serving Claremont means knowing its neighborhoods, not just its zip codes. We’ve worked on pedestal-operated driveway gates off Indian Hill Boulevard, older swing gates in the Village, and estate gates up toward the foothills where the wind comes down hard. 91711 is our coverage area, from the Colleges north to the base of the San Gabriels. When you call, the person who answers knows the difference between a Baldy View gate and a flatland gate, and we’ll schedule accordingly.
Styles & brands we work with





Commercial Gate Operator in Claremont
A commercial gate operator in Claremont is a different animal than a residential one, and it needs to be treated that way. We work on operators serving small HOA entrances, private lanes, parking areas behind the Village commercial district, and multi-property access points that see dozens of cycles a day. These operators run hotter, cycle harder, and fail in ways that a residential unit rarely does: relay contacts burning out, limit switches drifting, capacitor degradation, and control board failures from sustained heat. A commercial operator repair in Claremont typically runs $380 to $900 depending on whether we’re replacing a limit switch assembly or rebuilding the operator’s drive train.
Legacy Commercial Systems, Repaired Not Replaced
Many commercial gates around Claremont are still running 20-year-old operators because they were built well and nobody wants the downtime of a full replacement. We support that instinct. We’ll repair Linear, DoorKing, and Viking commercial operators whenever parts are still available, and we’ll tell you honestly when the cost of a third rebuild equals 70% of a new unit. The right fix, not the easy upsell.
HOA and Property Manager Support
Claremont HOAs and property managers call us because we give them a written diagnosis they can take to a board meeting. We document the fault, quote the repair, and explain the life expectancy of the fix. No vague “gate is broken” reports. If you’re managing a community that needs electric gate repair in Claremont, we’ll schedule around owner access hours and keep the gate functional while parts come in.
Gate Opener Repair in Claremont
Gate opener repair in Claremont often means working on swing gates, since the historic lots here favor them over sliders. The opener itself is usually one of three problems: a control board that’s lost its programming or a relay, a motor capacitor that’s failed so the arm won’t move under load, or a gearbox that’s stripped because the gate’s own weight has been fighting the operator for years. A typical gate opener repair in Claremont runs $220 to $480, with control board replacement on the higher end of that range.
Control Boards and Legacy Operators
Obsolete control boards are the single most common electric gate failure we see in Claremont homes. Heat is the killer. A 1990s board in a metal enclosure mounted to a south-facing stucco wall bakes every summer, and eventually a resistor or a relay gives out. The gate starts opening when it shouldn’t, or it reverses mid-cycle, or the keypad stops talking to the board. We carry replacement boards for major brands and will also do an honest retrofit where the manufacturer no longer supports the original part.
Sag Corrections and Hinge Post Realignment
We recently serviced a Craftsman home near the Claremont Colleges where a 1990s LiftMaster operator on a swing gate kept reversing randomly. The culprit was a failing safety photocell and a hinge post that had shifted from oak root growth. After replacing the photocell and doing a sag correction on the hinge post, we also upgraded the control board to a modern unit with self-diagnostics, restoring reliable operation while keeping the original wrought-iron gate. That’s electric gate repair in Claremont: the operator, the gate, and the ground all have to agree.
Trusted Brands We Service in Claremont
We work on the brand you already have. Manor Gate Repair services LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Claremont, that means we regularly see DoorKing on older estate gates, LiftMaster on 1990s and 2000s installs, and Mighty Mule on DIY conversions done by previous homeowners. We stock common boards, remotes, photocells, and limit assemblies for these brands, which means your repair doesn’t stall while we wait on a distributor. Your gate, restored to spec.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Claremont Homes
- Control boards that fail from heat and age. A board mounted in full Claremont sun for 15 summers degrades until the gate reverses mid-cycle or ignores the keypad. Replacement or retrofit usually beats another season of troubleshooting.
- Hinge posts thrown out of plumb by mature roots. In the historic neighborhoods around the Claremont Colleges, gates are frequently hung between mature pepper and oak trees whose shifting roots throw posts out of alignment. The gate sags, the operator strains, and eventually the motor strips.
- Wood gate warping and dry rot from Santa Ana cycles. Claremont sits at the base of the San Gabriel foothills; hot, dry summers followed by winter rains swell and rot the same wood. A warped gate drags against the ground or knocks the safety sensor out of alignment so the gate refuses to close.
- Safety sensors with dead aging eyes. Older photocells fail slowly. The beam weakens, the gate behaves erratically, and the homeowner thinks the opener is possessed. We replace the sensor, realign it, and test the gate under load.
Pricing for Electric Gate Repair in Claremont, CA
Electric gate repair in Claremont typically costs between $180 and $900, and most common repairs fall in the $220 to $480 range. A safety photocell replacement runs $180 to $290 including the part. A control board replacement on a residential operator runs $320 to $550 depending on brand and board availability. A commercial operator repair starts at $380 and can go to $900 for a full drive-train rebuild. A sag correction and hinge post realignment is usually $250 to $450. Every job is quoted and agreed before any work starts. Estimates are free at (844) 703-6053.
We Also Serve Cities Near Claremont
Manor Gate Repair provides Electric Gate Repair in Claremont and the surrounding foothill communities, including Montclair, La Verne, Upland, and San Antonio Heights. If your property is in one of these neighboring cities, the same multi-brand expertise and repair-first approach applies. Call (844) 703-6053 and we’ll tell you when we can be there.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Claremont
Yes, you can retrofit a modern safety photocell to almost any older gate operator in Claremont, and we do it regularly. The existing wiring usually supports a direct replacement, and modern photocells are more reliable than the infrared units installed in the 1990s. A retrofitted photocell installation typically runs $180 to $290 including the part and alignment. Call (844) 703-6053 for an exact quote; estimates are free.
In nearly all cases, yes, the gate can be fixed without removing the trees. What’s happened is that root growth has shifted the hinge post out of plumb, and the gate is dragging or binding against the operator. We do a sag correction on the hinge post, reset the gate’s swing geometry, and retest the operator under load. The trees stay. Call (844) 703-6053 and we’ll assess the post before quoting anything.
Usually it’s worth repairing, especially if the wood is old-growth and the gate has original character that a replacement can’t match. We assess dry rot, warp, and hinge integrity before recommending anything. If the frame is sound, we repair what’s failed. If the wood is rotted through, we’ll tell you before quoting a figure that exceeds replacement cost. Call (844) 703-6053 for a straight answer.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers nearly every operator installed in Claremont over the past 30 years. We stock boards and sensors for the most common ones, so repair doesn’t stall waiting on parts. Call (844) 703-6053 with your operator model and we’ll tell you the repair outlook.
Santa Ana winds slam a gate from one direction for hours, stressing hinges, latches, and the operator’s drive train. Over time, wind load loosens hinge hardware and can crack wood where hardware attaches. We recommend an annual check of hinge bolts, post plumb, and latch alignment before the October wind season. A pre-wind inspection runs $120 to $180. Call (844) 703-6053 to schedule yours.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving Claremont and the surrounding foothill communities since inception.