Electric Gate Repair in La Verne, CA | Manor Gate Repair

Electric Gate Repair in La Verne — On-Site in 60 Minutes, Fixed the Same Day

Most gate faults are diagnosed and fixed on the first visit. You get the price before we start, and the gate is left working and safe before we leave.

We answer around the clock

119+
Cities Served
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Electric Gate Repair Across La Verne

Electric gate repair in La Verne typically runs $240 – $680 for most operator and control board faults, with same-day or next-day scheduling available for non-functioning safety systems. If your automated gate in La Verne has stopped responding, is reversing unexpectedly, or the keypad has gone dark, call (844) 703-6053 and we’ll get a technician who actually understands the equipment to your property. We work throughout the 91750 zip code, from the tree-lined streets near Old Town to the newer HOA communities pressed against the San Gabriel foothills.

Call (844) 703-6053

What sets electric gate work in La Verne apart is the range of equipment we see in a single service area. One call might take us to a hand-forged iron swing gate on a Craftsman-era lot, the next to a slide gate operator feeding a 40-home association off Baseline. Most repair companies are comfortable with one or the other. We handle both, because automated gate repair is our core trade, not a side job we picked up along the way.

Why Manor Gate Repair Is La Verne’s Preferred Electric Gate Repair Company

Manor Gate Repair is led by Nelson Pryce, and our technicians carry the multi-brand diagnostic experience that La Verne’s mixed housing stock demands. We service nine gate automation manufacturers, so when a DoorKing operator on a foothill property fails, or an Elite board inside an Old Town estate gate throws a fault code, we don’t hand you a replacement brochure. We open the panel and find the fault. That brand-agnostic approach matters in La Verne because no two gates here seem to come from the same era, let alone the same manufacturer.

Our reputation in La Verne is built on the jobs general handyman services won’t take. Control board failures, underground operator issues, safety sensor misalignment, access control integration, all of it. Local property managers call us because they know we’ll arrive with the diagnostic tools and the parts to actually finish the job, not quote a full-system replacement as the opening offer. The right fix, not the easy upsell. That’s the standard we hold in every La Verne neighborhood we serve.

Response time to La Verne is straightforward. We dispatch from our Fontana location, which puts most of the 91750 zip code within a short drive. For a gate that won’t close, a stuck operator, or a safety edge that’s failed open, we prioritize those calls. You won’t wait days for a diagnosis when your perimeter security is compromised.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Gate Access Control in La Verne

Gate access control in La Verne is the layer that decides who gets in, and it’s the part of the system most likely to fail after years of San Gabriel Valley sun and Santa Ana wind exposure. Whether your property uses a keypad, a telephone entry system, a loop detector, or a card reader, our job is to restore the sequence: request access, verify, open, close, re-lock. When any link in that chain breaks, the gate either refuses to open or, worse, refuses to close.

Keypad and Card Reader Diagnostics

We see a lot of aging keypad systems on La Verne’s HOA gates, and the failure pattern is predictable: UV-brittle keypads, corroded terminals, and power surges that scramble access codes. We test the keypad at the component level and repair or replace only what’s failed. For card readers, the issue is often the reader itself losing calibration or the control board ignoring valid inputs. We diagnose down to the failed part.

Loop Detector and Telephone Entry Repair

Loop detectors buried under asphalt or concrete are a La Verne-specific challenge, since many have been in the ground since the original tract build-out. When a loop stops sensing vehicles, the gate may refuse to open automatically or may close on a car. We test loop frequency and continuity, repair the detector, and only cut pavement when the loop itself has failed. Telephone entry systems on estate gates often need module replacement after heat exposure, and we stock the common parts to avoid multi-week lead times.

Commercial Gate Operator in La Verne

A commercial gate operator in La Verne does more work per day than a residential unit does in a week, and it’s built for that duty cycle until it isn’t. HOA entrance gates, small commercial lots, and gated communities off Foothill Boulevard rely on operators that run dozens of cycles daily, year after year, in direct heat. When an operator arm bends, a gearbox strips, or a motor burns out, the failure is rarely subtle. The gate simply stops mid-travel or won’t respond at all.

Operator Arm and Gearbox Repair

Santa Ana winds are brutal on slide and swing gate operator arms in La Verne. We’ve replaced arms that were bowed from repeated wind load against a misaligned track, and gearboxes that stripped because the gate itself had been binding for months. The repair sequence matters: fix the gate’s mechanical alignment first, then rebuild or replace the operator. Skipping the first step guarantees a second failure. Our team does both in the same visit when parts are on hand.

High-Cycle Operator Replacement

When a commercial operator is beyond economical repair, we size the replacement to the actual gate weight, width, and daily cycle count, not to whatever is cheapest on a shelf. We work with LiftMaster, DoorKing, and Elite operators, among others, and we install them with proper safety devices: monitored photocells, safety edges, and warning signage. In La Verne’s HOA communities, we coordinate with the property manager so installation windows don’t leave the entrance open overnight.

Trusted Brands We Service in La Verne

We work on the brand you already have. If your La Verne gate runs on a LiftMaster operator, an Elite control board, or a Mighty Mule motor, we service it without pushing a full-system replacement. Our Fontana facility keeps common boards, remote controls, safety sensors, and operator components in stock for faster turnaround on La Verne jobs. That means fewer multi-day waits on parts shipped from out of state. When we quote a repair, we quote the actual part and labor for the equipment on your property, not a generic system-swap price. Automated gate specialist means exactly that: we fix what’s installed, and we stock for the brands we service.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Electric Gate Repair Problems We See in La Verne Homes

  • Warped wooden estate gates near Old Town La Verne. Intense summer sun dries and warps wood, which makes the gate bind against the operator and eventually strain the motor. We correct the sag or replace warped sections before installing or recalibrating the operator, so the new parts aren’t fighting a gate that no longer hangs square.
  • Gopher and ground squirrel damage to post footings. Foothill-adjacent lots in La Verne deal with constant burrowing around gate posts. The footing erodes, the post leans, and the gate starts dragging. We address the footing first, because no operator adjustment fixes a post that’s tilting further every week.
  • Santa Ana wind damage to operator arms and slide tracks. High winds bend arms, knock slide gates off their tracks, and misalign the wheels that carry the gate. We see this most on older ornamental-steel gates in the citrus-belt streets, where the wind channel is strongest. The fix often includes straightening or replacing the arm, re-truing the track, and testing the full open-close cycle under load.
  • Eaton Fire debris jamming rollers and tracks. The December 2024 fire left ash and fine debris across northern La Verne neighborhoods. That material works into roller assemblies and track channels, causing jerky operation and motor overload faults. We clean the track, flush the rollers, and inspect the operator for strain damage when we’re on a foothill property.

Pricing for Electric Gate Repair in La Verne, CA

Electric gate repair in La Verne has real, predictable price bands. A keypad replacement typically runs $180 – $350 installed. Remote control programming and replacement: $75 – $160. Safety sensor alignment or replacement: $150 – $320. Control board diagnosis and repair: $280 – $650 depending on the board and whether we can repair the existing unit or need to swap it. Operator motor or gearbox repair: $350 – $750 for most residential units, with commercial operators running higher based on cycle rating. Underground operator work, which involves excavation and waterproofing, starts around $1,200 and goes up with depth and conduit condition. Every job is quoted and agreed before any work starts. The number you approve is the number you pay. Call (844) 703-6053 for a free estimate, and we’ll give you the figure in writing.

We Also Serve Cities Near La Verne

Manor Gate Repair provides Electric Gate Repair service across the eastern San Gabriel Valley. In addition to La Verne, our technicians regularly work in Claremont, Pomona, Montclair, and Upland. If your property sits near a city line, or you manage gates in multiple nearby communities, one call covers it. We know the streets, the housing stock, and the gate equipment common to La Verne and its neighbors, which means less time explaining and more time repairing.

Serving La Verne, CA — Our Local Coverage Area

We’re based in the La Verne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs About Electric Gate Repair in La Verne

Why La Verne Chooses Manor Gate Repair

We set the standard for electric gate repair in La Verne.

30–60 Min Response

Fast dispatch across La Verne. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in La Verne

Getting your electric gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your electric gate repair needs and we provide an upfront, transparent quote — no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in La Verne — typically within 30–60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees — talk to a local electric gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What La Verne Customers Say

Trusted by homeowners across La Verne and surrounding areas.

★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."

Riya Mehta · Verified customer
★★★★★

"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."

Megan Delaney · Verified customer
★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Tracy Mercer · Verified customer

Ready for Electric Gate Repair in La Verne?

Call now for a free estimate — or request one below. Licensed, insured, and here with fast after-hours help in La Verne.

(844) 703-6053

Request a Free Estimate in La Verne

Tell us about your electric gate repair needs — we'll respond within the hour.

By reaching out through this form, you acknowledge our Privacy Policy and authorize us to contact you by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Areas We Serve
Call Now - 24/7 Dispatch