Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Redlands, CA | Manor Gate Repair
We repair Mighty Mule swing and slide gate operators throughout Redlands, including the 92373, 92374, and 92375 ZIP codes. As an independent service provider, we’re not affiliated with or authorized by Mighty Mule, and we don’t need to be: our technicians work on these units daily, from the MM360 and MM560 swing openers to the FM350 slide models. The defining difference here is that much of Redlands’s older housing stock was never built for modern automation, so we spend as much time re-setting century-old brick and wood posts as we do diagnosing the operator itself. If your Mighty Mule opener is acting up in Redlands, call (844) 703-6053 for a free estimate.
Why Redlands Residents Choose Us for Mighty Mule Service
We’re the multi-brand gate specialist that works on the brand you already have. That matters in Redlands, where a single neighborhood can hold a 1920s iron driveway gate on Citrus Avenue and a mid-century sliding gate over in 92374. Most gate companies here either sell one brand or only touch basic mechanical work. Manor Gate Repair services nine major automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we won’t tell you to rip out your Mighty Mule operator and start over just because we don’t stock the parts.
Nelson Pryce, our owner and lead technician, grew up off Boulder Avenue in Highland and studied industrial mechanics and hydraulic systems at San Bernardino Valley College. He’s spent two decades diagnosing gate operator failures other techs misread, particularly on aging swing-gate systems where worn pivot hardware takes the blame for motor problems that don’t exist. That diagnostic patience shows up in every Mighty Mule call we run in Redlands. We use genuine Mighty Mule components when you want to keep the unit original, and quality aftermarket wear parts like hinges and rollers where they make more sense. Upfront pricing, quoted and agreed before any work starts.
Styles & brands we work with





Common Mighty Mule Gate Repair Problems We Solve in Redlands
- Control board failures on MM360 and MM560 swing openers. Inland heat cycles and voltage spikes are hard on these boards. After several Redlands summers, the board fails and the gate either dies entirely or stops mid-travel. We test the board in place, confirm the fault, and replace with genuine Mighty Mule circuitry when the owner wants OEM.
- Battery backup and solar systems that won’t hold charge. A 12V battery that’s baked through a Redlands summer will open the gate once and stall on the second cycle. After a Santa Ana wind event cycles the operator repeatedly, the aging battery gives out completely. We replace batteries and test the charging circuit rather than just swapping the cell and leaving.
- Limit switches and gear racks drifting out of adjustment. This is the most common call we get from the tract-home sliding gates of 92374. The gate over-travels, reverses erratically, or slams the stop. The fix is precise adjustment, not replacement, and we set limits so the gate runs clean in both directions.
- Transmitter and receiver pairing loss. Mighty Mule remotes lose their programming, receiver boards burn out, and suddenly the keypad won’t talk to the opener. We re-pair or replace the receiver and reprogram all remotes and keypads before we leave.
- Sagging swing gates straining the operator. In Redlands’s older 92373 core, the original iron and wood gates sit on hinges that have worn over decades. The Mighty Mule arm pushes against a gate that’s dropped half an inch out of square, and the motor works twice as hard. We re-hang the gate, rebuild the hinge, and only then adjust the operator so it isn’t fighting a losing battle.
Mighty Mule Service in Redlands: What Local Conditions Mean for Your Equipment
Redlands’s historic 92373 core runs on detached garages and alley-facing driveways. That’s not a quirk; it’s the single biggest factor in how Mighty Mule openers behave here. Many of these operators are bolted to century-old posts set in original iron or wood gate frames rather than fresh concrete. The post has shifted, dried, or twisted over eighty-plus years, and the opener is trying to work against that movement. We often have to re-set or sister the post before the Mighty Mule unit itself will run reliably. On an alley-facing driveway off the historic core, our crew found an MM560 swing opener that stalled halfway because its battery backup had gone flat and the original wooden post had dried and twisted under the gate’s weight. We re-set and sistered the post, re-hung the gate on new hinges, and replaced the aging 12V battery and receiver. The owner kept his operator and got reliable remote and keypad entry back without buying a whole new system. That’s the Redlands repair profile: solve the post and hinge problem first, then the electronics fall into line.
Mighty Mule Models & Products We Service in Redlands
We work on the MM360 and MM560 automatic swing gate openers in both single and dual configurations, the FM350 and FM600 slide gate openers, the FM700 and FM702 swing gate openers, and the MM272 and MM572 DIY-series swing openers with solar and battery backup. Genuine Mighty Mule control boards, batteries, arms, and limit parts are our default when the owner wants to keep the unit original. For wear items like hinges, rollers, and remotes, we offer quality aftermarket equivalents that perform as well as OEM at a lower cost. And when a Mighty Mule unit is fifteen-plus years old with a burned board and a tired motor, we tell owners straight when a new operator is the better spend than stacking repairs. From diagnosis to installation, the right fix, not the easy upsell.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Redlands
Service pricing for Mighty Mule repair in Loma Linda and Redlands depends on what’s actually failed. A simple limit-switch adjustment or transmitter re-pair runs on the lower end. A control board replacement with an OEM part costs more, and if we’re re-setting a century-old post before touching the operator, the job includes that structural work. A free estimate with Manor Gate Repair means we come out, diagnose the fault, and write the price before any work starts. You’ll know the number and approve it first. Call (844) 703-6053 for an exact quote on your Mighty Mule gate, Redlands owner to Redlands owner.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well, with Colton Mighty Mule service also available. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Redlands
No, Manor Gate Repair is an independent gate repair company and has no affiliation with or authorization from Mighty Mule. We service Mighty Mule equipment because our technicians know these systems in depth, not because a manufacturer sends us work. Many Redlands owners prefer an independent shop that can tell them honestly when a unit is worth repairing versus replacing.
Yes, when you want to keep the unit running as designed, we install genuine Mighty Mule control boards, batteries, arms, and limit parts. For wear items like hinges, rollers, and remotes, we offer quality aftermarket alternatives that cost less without cutting corners. We’ll show you the difference and let you choose. Call (844) 703-6053 for a parts quote on your specific model.
Most single-fault repairs like a limit adjustment, battery replacement, or receiver re-pair are completed in one visit. If we’re re-setting and sistering a century-old post before re-hanging the gate and then tuning the operator, the job may take a full day. We quote the timeframe up front so you’re not wondering when the gate will close again.
We service the MM360 and MM560 swing gate openers in single and dual configurations, the FM350 and FM600 slide gate openers, the FM700 and FM702 swing gate openers, and the MM272 and MM572 DIY-series openers with solar and battery backup. If you have a different Mighty Mule model, call us, because we likely work on it too.
Yes. Manor Gate Repair services nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Mighty Mule unit is beyond repair, we can quote a replacement from the brand that best fits your gate, your driveway layout, and your budget. We’re not tied to one manufacturer’s catalog. Call (844) 703-6053 for a free replacement estimate in Redlands.
Service Areas Near Redlands
Our Mighty Mule service coverage extends from Redlands into the surrounding Inland Empire: Fontana, Bloomington, Rialto, Sunnyslope, and Glen Avon. If you’re in one of these neighboring communities and your Mighty Mule opener is down, we’ll send a technician out. You can also learn more about our Mighty Mule sales & service or see our full Redlands service area. We also provide dedicated Mighty Mule service in Woodcrest and Mighty Mule service in Chino.
Book Your Mighty Mule Service in Redlands Today
If your Mighty Mule service in Mentone or Redlands is needed for a gate that’s hesitating, stalling, or dead entirely, call Manor Gate Repair at (844) 703-6053. We serve all of Redlands including 92373, 92374, and 92375, with free estimates and pricing agreed before any work begins. Your gate, restored to spec.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving Redlands and the Inland Empire since 2005.