Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redlands, CA
Gate installation in Redlands means working around 80 to 100 year old ironwork, mature citrus trees, and alley-loaded driveways that most tract-home contractors never see. We install automatic and manual gates across the 92373, 92374, and 92375 ZIP codes, and we plan every job around the specific conditions of your property: sun exposure, tree canopy, column condition, and the era of the house. From a new sliding gate on a mid-century lot to a period-appropriate driveway gate on a Craftsman street, we handle the full scope. Call Manor Gate Repair at (844) 703-6053 for a free on-site consultation.
Why Redlands Homes Are Different
Redlands is not a uniform subdivision city. The 92373 core holds one of the largest concentrations of pre-1950 homes in the Inland Empire, including Craftsman, Victorian, and Spanish Colonial stock with detached garages and alley-facing driveways. Many of those properties still have their original wrought-iron or heavy wood driveway gates. Those gates are not failing because they were built poorly. They are failing because they have been standing in Southern California heat for close to a century, and the metal is pitted, the wood has dried and split, and the hinges have been carrying more load than they were ever designed for.
The east side and 92374 lean toward mid-century and tract-era construction, where you find lighter aluminum gates and sliding track systems. The repair pattern is different there: less rust, more bent track, more roller wear, more operator failures. The climate works against both types of gate. Intense summer sun bakes powder coating and oxidizes bare iron. Santa Ana wind events load swing gates laterally, loosening hinge bolts and pulling posts out of plumb. And in the older blocks, the same mature trees that give Redlands its character drop limbs and debris into gate tracks and onto gate frames with enough force to shear rollers and bend steel. A gate company that treats every job like a simple hardware swap will miss exactly these Redlands-specific failure patterns. We do not.
Styles & brands we work with
Our Main Redlands Services
Redlands homeowners and property managers call us most often for two things: restoring a gate that has stopped working properly, and diagnosing an automated system that has gone down. Both live under our full-service umbrella, and each has its own dedicated Redlands page.
Gate Repair in Redlands
Mechanical gate repair in Redlands covers sagging iron gates, seized hinges, broken welds, split wood members, bent track, and posts that have pulled out of true. On historic properties, the job often shifts into restoration: re-welding pitted iron, sourcing period-appropriate hardware, and rebuilding rather than replacing. On newer homes, the work is more about alignment and worn components. Either way, we quote the repair before any work begins. Read the full breakdown at Gate Repair in Redlands.
Electric Gate Repair in Redlands
Electric gate repair is our core specialty. Control boards, limit switches, photo eyes, loop detectors, capacitor failures, operator arm bind, and low-voltage wiring faults account for most of the service calls we run in Redlands. The heat and dust of the inland climate shorten capacitor life and cook boards mounted in unventilated housings. We diagnose the actual fault rather than condemning the whole system. For the full scope of what we cover, see Electric Gate Repair in Redlands.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Redlands
A new gate in Redlands is either a replacement for a structure that has reached the end of its service life or a first-time installation on a property that never had one. On pre-war homes, the work usually starts with the existing columns and the question of what they can actually support. On newer lots, we are typically working with clean post lines and simpler setbacks. The climate drives material selection: powder-coated steel and properly sealed hardwood hold up far better than raw iron or untreated softwood in this sun and heat. We install automatic and manual gates across all Redlands ZIP codes, and every install is quoted and agreed before any work starts. For the complete scope of our installation work, visit Gate Installation.
Automatic Gate Installation
Signs you need it
You are opening and closing a driveway gate by hand multiple times a day, or the property has no gate and you want controlled access without giving out codes to every visitor.
What it costs in Redlands
Automatic gate installation in Redlands typically runs $3,500 to $6,000 complete with operator, receiver, and standard safety edges, depending on gate size and post condition.
How we do it
We set or reinforce the posts, mount the operator and hinges to spec, pull the low-voltage power run, wire the safety inputs and receiver, then cycle the gate through full travel and test obstruction reverse before calling the job done.
Driveway Gate Installation
Signs you need it
The existing gate is rusted through, sagging past adjustment, or sized wrong for the driveway, or the property has an open driveway access that the owner wants secured.
What it costs in Redlands
A new driveway gate installation in Redlands typically runs $2,000 to $5,000 for a manual swing gate, with automation adding $2,000 to $3,500 depending on the setup.
How we do it
We measure the driveway opening and column positions, select gate material and weight class to match the span, set or repair the posts, hang and align the gate, and adjust the sweep and latch so it closes clean against the stop.
Sliding Gate Installation
Signs you need it
The driveway has a slope or tight clearance that makes a swing gate impractical, or the property already uses a sliding gate that is off its track and beyond repair.
What it costs in Redlands
Sliding gate installation in Redlands typically runs $3,500 to $7,000, including track, rollers, gate frame, and a slide operator where automation is part of the job.
How we do it
We set a track and roller assembly on a level rail foundation, build or fit the gate frame to the opening, mount the operator and limit switches, and run the gate through open and close cycles to confirm smooth travel and clean stop points.
What Gate Installation Costs in Redlands
| Item | Typical range in Redlands |
|---|---|
| Manual driveway gate (single swing) | $2,000 – $5,000 |
| Automatic operator, receiver and safety edges | $2,000 – $3,500 |
| Sliding gate with track, rollers and frame | $3,500 – $7,000 |
Does Manor Gate Repair handle the concrete and post work for a Redlands gate install?
In most cases, yes. We set and reinforce posts, pour the pad for a slide operator, and handle the low-voltage wiring as part of the same job. If a project requires structural or masonry work beyond a gate contractor’s scope, we will tell you before the quote is finalized so there are no surprises. Call (844) 703-6053 for a site walk.
Can you install the same operator brand I already have in Redlands?
Usually. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and on most installs we can match the existing brand when the site conditions support it. We quote the exact operator and controls before any work starts. Call (844) 703-6053 for a free estimate.
Brands We Service in Redlands
We work on the brand you already have. Our Redlands service vehicles stock common parts for DoorKing, Elite, Mighty Mule, and LiftMaster: control boards, remote receivers, limit switches, photo eyes, and hinge hardware. That means most repairs get completed same-visit rather than waiting on freight. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redlands, CA
| Service | Typical range in Redlands |
|---|---|
| Gate repair service call and diagnosis | $65 – $120 |
| Hinge replacement (pair) on a driveway gate | $200 – $450 |
| Weld repair on an iron gate | $250 – $600 |
| Wood gate section rebuild | $500 – $1,200 |
| Control board replacement | $450 – $1,100 |
| Operator arm replacement | $400 – $900 |
| Photo eye or safety edge replacement | $200 – $550 |
| Manual swing gate replacement | $2,000 – $5,000 |
| Automatic gate installation (complete) | $3,500 – $6,000 |
| Sliding gate installation (with track and operator) | $3,500 – $7,000 |
Two things push Redlands gate pricing up: historic-column work that requires custom mount fabrication, and tree-damaged track or frame sections that need more than a straightforward part swap. Whatever the condition, the price is quoted and agreed before any work starts. No invoice grows after the fact.
Neighborhoods We Serve in Redlands
We run gate repair and installation calls across the entire Redlands area, from the tree-lined blocks of the 92373 core out to the newer developments east of downtown. Our normal response time for non-emergency calls in Redlands is under two hours, and we batch same-day emergency calls when storms or high winds bring down limbs and gates together.
- South Redlands and the historic 92373 core
- North Redlands and the University district
- East Redlands and the 92374 tract neighborhoods
- Sunset Drive and the canyon-adjacent streets
- Smiley Heights and the citrus-belt properties
Service Area – Cities Near Redlands
Manor Gate Repair covers Redlands and the surrounding communities throughout the east Inland Empire. We serve Mentone, CA to the east, Loma Linda, CA to the west, Highland, CA to the north, and Colton, CA just past Loma Linda. If you are just outside Redlands proper, call and we will confirm coverage before you schedule.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redlands
For standard non-emergency gate repairs in Redlands, we typically arrive within two hours of your call. For a gate stuck open or an automated gate that won’t close and secure the property, we prioritize same-day response. Call (844) 703-6053 and we will give you a real arrival window for 92373, 92374, or 92375.
Repair work on an existing gate rarely triggers permit review in Redlands. New installation with a powered operator can require an electrical permit depending on the power run and the city’s current code. We will tell you what applies to your specific project before the quote is final. Call (844) 703-6053 to discuss your property.
Yes. We handle gate work for HOAs, apartment complexes, and managed properties across Redlands, including common-area entry gates and controlled-access systems. We bill cleanly, work around board approval timelines, and document every repair for the HOA file. Call (844) 703-6053 to schedule an HOA site evaluation.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redlands Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta