Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Redlands, CA | Manor Gate Repair
If your Ghost Controls operator is reversing mid-travel, beeping without reason, or failing to hold a charge on a Redlands driveway, we can usually diagnose it the same day. We provide independent Ghost Controls repair across Redlands’s 92373, 92374, and 92375 ZIP codes. The single thing that makes our Ghost Controls work different here is simple: Redlands’s historic gates, alley trees, and inland heat create failure patterns a technician in a newer tract city rarely sees. Call (844) 703-6053 for a free estimate.
Why Redlands Residents Choose Us for Ghost Controls Service
We work on Ghost Controls operators every week across Redlands’s older driveways, so we know the AXO and ACC controller behavior, arm geometry, and accessory wiring without guessing. We are an independent repair shop, not affiliated with or authorized by Ghost Controls, and we troubleshoot the whole gate rather than just swapping boxes. Nelson Pryce, our owner and lead technician, grew up off Boulder Avenue in Highland and has spent two decades reading gate operator failures that other techs misread, particularly on aging swing-gate systems where worn pivot hardware gets blamed for motor problems that don’t actually exist. That matters on Redlands’s old iron gates. We combine Ghost Controls depth with local familiarity – we know which 92373 alley gates have been fighting the same citrus trees for decades. We’re also qualified across nine gate automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, and DoorKing. Ghost Controls sales & service is our specialty, but we never push a replacement when a repair is the right call.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Redlands
- Arm brackets and hinge posts drifting out of plumb after Santa Ana wind loading. When wind loads a wide double gate, the Ghost Controls arm’s limit positions no longer land where they were taught. The gate reverses mid-travel or stalls before full close. We re-set the post, re-teach the limits, and replace the jolted bracket.
- Battery and solar-harness failures from inland heat. Redlands’s intense summer sun degrades sealed batteries and solar leads. A unit that ran for years suddenly won’t hold an open command, or it beeps and quits after one cycle. We stock OEM batteries and harnesses for same-week turnaround.
- Controller and limit-switch faults after a citrus limb drops on the gate. The arm gets jolted, the taught limits slip, and the AXO or ACC board reads a false obstruction. This is a Redlands-specific pattern tied to the 92373 tree canopy. We re-teach the arm and repair the board rather than condemning it.
- Corrosion and debris fouling at the arm pivot and roller hardware on old iron gates. Pitted iron flakes and tree debris bind the swing, overloading the opener so it trips on current-limit. We clean, lubricate, and replace worn pivots before the motor cooks itself.
- Sagging or split wood gates on 1920s-era driveways. Redlands’s dry heat dries and warps original wood gates, which transfers load straight to the Ghost Controls arm. We rebuild or reinforce the gate so the operator isn’t fighting the structure.
Ghost Controls Service in Redlands: What Local Conditions Mean for Your Equipment
The mature citrus-grove-era trees overhanging Redlands’s alley-facing driveways in the 92373 historic core drop limbs onto swing gates with a frequency that simply doesn’t happen in a newer tract city or a coastal town. A limb that bends a gate frame also jolts the Ghost Controls arm, knocks the taught limit positions loose, and sometimes cracks the arm bracket itself. That is the repair pattern we see repeatedly in the old blocks around the Craftsmans and Victorians downtown, and it is the thing that defines our Ghost Controls work in Redlands. A homeowner on an alley-facing driveway off the 92373 core had a Ghost Controls AXO dual-swing setup that started reversing halfway through closing after a winter limb drop bounced the arm. We straightened and re-set the hinge post, re-taught the arm’s limit positions, replaced the jolted arm bracket, and swapped the heat-degraded battery and solar leads, then cycled it open and closed cleanly. The old iron gate now tracks true and holds its commanded positions again. A generic repair page won’t name that failure mode because a generic repair page doesn’t see it. We do.
Ghost Controls Models & Products We Service in Redlands
We repair the Ghost Controls AXO heavy-duty dual swing opener, the ACC single swing opener, the architectural tube-and-arm swing kits built for wide double driveway gates, and the solar and battery accessory setups common on Redlands’s detached-garage gates, with Ghost Controls service in Loma Linda available as well. For anything that has to communicate with the existing controller, we keep OEM Ghost Controls boards, arms, batteries, and solar harnesses on hand for fast local turnaround. Where a stronger aftermarket bracket or hardware piece makes more sense on an old iron post, we use that instead and tell you why. If an operator is worth repairing, we repair it. If a fatigued arm on an 80-year-old iron gate means replacement is the smarter spend, we’ll say so plainly.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Redlands
Ghost Controls in Colton and Redlands typically starts with a service call that covers diagnosis. Motor repair for an AXO or ACC arm generally runs $180 to $320 depending on what’s failed. Battery and solar harness replacement usually lands between $120 and $240. Hinge and post repair on old iron or wood gates runs $150 to $450, with more variance on 1920s-era posts that need custom fabrication. Our free estimate includes a full assessment of the gate, the operator, and the power path. We quote the price and get your agreement before any work starts. Call (844) 703-6053 for an exact figure on your gate.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Redlands
The opener itself is usually fine. A gate that reverses halfway is almost always a mechanical or limit issue: a wind-loosened hinge post, a bent bracket, or a taught limit position that slipped after a limb strike. We check the gate’s swing geometry first, then the controller. If the board reads a false obstruction, we re-teach the limits and test under load. Call (844) 703-6053 and we’ll sort out which one it is.
Redlands’s sustained heat degrades sealed lead-acid batteries and solar leads faster than the manufacturer’s general lifespan estimates. A unit that held a charge for years can fail suddenly after one hot season. We replace the battery and test the solar harness under full sun to confirm the panel is actually feeding the controller. Call (844) 703-6053 for a battery check.
Yes. That is the defining job in Redlands’s 92373 core. The challenge is the gate, not the operator. Pitted iron, sagging hinge posts, and tight clearances require a technician who can level old hardware and re-teach the arm to the gate’s actual swing path. We do this regularly on Craftsman and Victorian driveways downtown.
For anything that has to speak to the existing controller – boards, arms, batteries, solar harnesses – we use OEM Ghost Controls parts, and our Highland Ghost Controls service follows the same standard. For brackets and hardware where an aftermarket piece is stronger on an old iron post, we use that and explain why. We are independent, not authorized by Ghost Controls, which means we choose the part that actually fixes the gate.
Usually not, and you should know that before spending the money. A solar panel needs direct sun exposure. Shaded alleys under mature citrus trees don’t provide it, and the battery will chronically undercharge and fail early. We’ll tell you if hardwiring a power run is the right call for your gate. Call (844) 703-6053 and we’ll check your sun exposure on the quote visit.
Service Areas Near Redlands
Our Ghost Controls service covers all of Redlands plus the surrounding communities. We regularly work in Fontana, Rialto, Sunnyslope, Bloomington, and Glen Avon. Redlands service area coverage extends to the full 92373, 92374, and 92375 ZIP codes.
Book Your Ghost Controls Service in Redlands Today
If your Ghost Controls gate is hesitating, reversing, or dead on a Redlands driveway, call us at (844) 703-6053. A gate that hesitates is a gate that’s telling you something. The job is to listen before you wrench. Estimates are free, and we quote the price before any work begins.
Written by Nelson Pryce, Owner & Lead Gate Technician at Manor Gate Repair, serving Redlands and the Inland Empire.