Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland, CA
Gate installation in Highland means building for sun, wind, and dust. Most homes here are mid-century to late-20th-century tract houses with block-wall perimeters, plus larger-lot and semi-rural properties on the edges where driveway gates are heavier and openers are often aftermarket add-ons. Manor Gate Repair has served Highland since 2014, and the job usually comes down to sizing the gate, posts, and operator for conditions that wear equipment faster than you’d expect. Call (844) 703-6053 for a free estimate on any gate project.
Why Highland Homes Are Different
Highland sits in the hot, dry, wind-exposed Inland Empire east of San Bernardino, and that changes how gates fail and what lasts. Intense summer UV breaks down powder coating and paint finishes on wrought-iron and chain-link driveway gates. Santa Ana winds torque swing gates at the hinge line, which is why we regularly see sagging frames on larger-lot properties off Base Line and Victoria Avenue. Dust is the quieter problem: it packs into slide-gate tracks and opener rails, grinding rollers and forcing motors to work harder until they trip thermal overloads or strip gears.
The housing stock amplifies it. Highland’s tract homes from the 1960s through the 1990s often have original block walls with gates retrofitted decades later. On semi-rural edges, we see heavy wrought-iron gates bolted to posts that were never set deep enough for the weight, and aftermarket automatic openers that were undersized from day one. That combination – wind stress, sun fatigue, dust, and hardware that was never matched to the job – means gate work here is as much about correcting previous shortcuts as it is about fixing the symptom in front of you.
Styles & brands we work with
Our Main Highland Services
Homeowners in Highland call us most often for two things: mechanical gate repair when a hinge, latch, or track fails, and electric gate repair when an operator or control board stops responding. Here’s what each involves.
Gate Repair in Highland
Wind and sun fatigue dominate mechanical gate failures in Highland. We realign sagging swing gates, replace worn hinges and latch posts, cut and re-weld cracked wrought-iron sections, and clear dust and grit from slide tracks. Many of these gates are older originals on 1970s and 1980s tract properties, so the repair is often about restoring hardware that predates current ownership rather than replacing it. Gate Repair in Highland covers the full scope of mechanical work on this page.
Electric Gate Repair in Highland
When an automated gate in Highland won’t open, won’t close, or reverses for no visible reason, the fault is usually in the operator, sensors, or control board rather than the gate itself. Dust intrusion into motor housings and UV-baked wiring are common failures here. We diagnose across nine automation brands, so the answer is a repair matched to the system you already own. Electric Gate Repair in Highland has the full detail for automated systems.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland
Gate installation in Highland has to account for three local realities: block-wall perimeters on most tract properties, semi-rural lots where gates are larger and heavier, and a climate that punishes undersized posts, thin-gauge hardware, and openers that were never matched to the gate’s mass and wind load. We size every component for the specific gate and site, because a properly built Gate Installation in Highland should hold its alignment through Santa Ana seasons and 100-degree summers without constant adjustment. Our team handles everything from the first measurement through the final opener programming – Gate Installation is a service we do start to finish with one crew.
Automatic Gate Installation
Signs you need it
You’re manually opening a driveway gate multiple times a day, or an existing operator has failed and the gate itself is still structurally sound.
What it costs in Highland
Automatic gate installation in Highland typically runs from $2,300 to $10,000 depending on the operator type, gate weight, and whether a new power run is required.
How we do it
We measure gate weight and swing or slide travel, spec an operator from a brand the site’s electrical setup can support, set the mounting hardware, run and protect the power, and program travel limits and safety inputs before handing it over.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags past the point of economical repair, or you’re adding a gate to a block-wall opening that was never gated before.
What it costs in Highland
A new driveway gate in Highland commonly costs between $1,200 and $7,500 depending on material, width, and whether automation is included.
How we do it
We confirm the post footings can carry the gate’s dead and wind load, fabricate or order the gate to the opening, set and plumb the posts, hang the gate with rated hinges or rollers, and align the latch and stops so the gate closes square every time.
Sliding Gate Installation
Signs you need it
Your driveway slopes or the setback doesn’t allow a full swing arc, so a sliding gate is the only geometry that clears vehicles and the property line.
What it costs in Highland
Sliding gate installation in Highland typically falls between $2,300 and $10,000, with the track system, gate weight, and automation driving most of the variance.
How we do it
We lay out the track on a level foundation, set the gate frame and roller trucks so the gate glides without binding, install the operator and rack, and tune travel limits and safety edges for consistent operation in Highland’s dust-heavy air.
What Gate Installation Costs in Highland
| Item | Typical range in Highland |
|---|---|
| Driveway gate, manual, single swing | $1,200 – $3,500 |
| Automatic gate with operator | $2,300 – $10,000 |
| Sliding gate with automation | $2,300 – $10,000 |
Does gate installation in Highland require a permit?
Yes, most Highland gate installations need city approval, especially for automated gates and any work near the property line or right-of-way. We confirm permit requirements during the estimate so the project starts with the right paperwork.
How long does a gate installation take in Highland?
Most straightforward gate installations in Highland finish in one to two days once materials and any required permits are in hand. Custom fabrication or automated systems with new power runs can add a few days. Call for a realistic timeline on your specific project.
Brands We Service in Highland
We work on the gate operator brand you already have, and we install the brand that fits the job. In Highland that means regular work on DoorKing and Elite systems on semi-rural properties, Mighty Mule add-ons on tract-home driveways, and LiftMaster operators on larger automated gates. Parts are sourced to match, which keeps turnaround on repairs shorter than ordering through a single-brand dealer. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland, CA
| Service | Typical range in Highland |
|---|---|
| Gate repair, basic mechanical | $150 – $450 |
| Gate repair, hinge or weld work | $260 – $720 |
| Gate roller or track replacement | $230 – $700 |
| Electric gate service call | $90 – $180 |
| Operator or control board replacement | $850 – $4,900 |
| Safety sensor or loop repair | $220 – $650 |
| Automatic gate installation | $2,300 – $10,000 |
| Driveway gate installation | $1,200 – $7,500 |
| Sliding gate installation | $2,300 – $10,000 |
Prices in Highland tick upward when a gate is oversized for its posts, when Santa Ana wind exposure demands heavier hardware than the original install used, and when dust intrusion has already damaged an operator beyond board-level repair. Every quote is written and agreed before any work begins.
Neighborhoods We Serve in Highland
We cover all of ZIP code 92346 and the streets around it. Response is typically same-day for repair calls in central Highland, with next-morning availability for the further semi-rural edges.
- East Highlands
- Highland Village area
- Base Line corridor
- Victoria Avenue neighborhoods
- Northeast Highland and the semi-rural edges off Greenspot Road
Service Area – Cities Near Highland
Manor Gate Repair’s Highland service area reaches into the neighboring cities where homeowners have the same wind, sun, and dust conditions on their gates. We handle gate repair and installation in San Bernardino, CA, Muscoy, CA, Redlands, CA, and Loma Linda, CA, with the same brand-agnostic approach we use across Highland.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland
For repair calls, we’re usually on-site in Highland the same day you call, and often within a few hours for the central 92346 area. Installation estimates are scheduled as free on-site visits, typically within a couple of business days. Call (844) 703-6053 to confirm current availability.
Yes. Many Highland neighborhoods have HOA design standards for driveway gates, and the city reviews automated gate work. We flag both during the estimate and prepare the submittals needed, so you’re not managing paperwork or risking an HOA knock-back after installation.
That’s most of what we see in Highland. We service all nine major automation brands and repair gates from any original installer. The fix is matched to the hardware you own, not to a brand we’re tied to, and we only recommend replacement when the existing gate or operator is beyond reasonable repair.
For any gate work in Highland, call Manor Gate Repair at (844) 703-6053 for a free estimate. The price is quoted and agreed before any work starts, and we work on the brand you already have.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Beatriz Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Todd Miller"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta