Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Eastvale, CA
Gate installation in Eastvale is almost always a replacement job, not a first-time build. The city developed almost entirely after the early 2000s, so the original builder-installed gates on those large stucco two-stories are now 10 to 20 years old and failing on the same schedule. We handle the full job: removing the old steel or aluminum frame, setting new posts in Eastvale’s dry, compacted soil, and installing a gate built for the Inland Empire heat. If your side-yard gate is sagging or your driveway gate operator is dead, call Manor Gate Repair at (844) 703-6053 for a free estimate.
Why Eastvale Homes Are Different
Eastvale is a master-planned city built out almost entirely since the early 2000s, so most driveway and side-yard gates here are 10 to 20 years old and hitting the same failure window at once. The housing stock is predominantly large two-story stucco single-family homes on tile roofs from the 2000s to 2010s tract build-out, with attached garages and side-yard or driveway gate gaps between fences. The gates themselves are typically builder-installed steel or aluminum frames with wood or metal infill, not custom wrought iron. That matters because those builder-spec gates were never engineered for a 20-year service life in this climate.
The Inland Empire heat and dry summers, with regular 95 to 105 degree stretches, dry out and warp wood gate infill and expand and contract metal frames. Winter rains in this semi-arid zone drive rust at hinge welds and base plates. And the Santa Ana wind events add real load on freestanding gates between fence lines. On the newer tracts off the 15 corridor, we see side-yard gates built to the same builder spec fail in clusters. A technician working one cul-de-sac in Eastvale often finds the identical sagging hinge-and-frame problem on the same floor plan a few doors down. That is not a coincidence. It is what happens when tract-wide, builder-era gate systems reach the end of their design life on similar timelines, often one house at a time.
Styles & brands we work with
Our Main Eastvale Services
Eastvale homeowners call us about two things more than anything else: a gate that no longer opens and closes correctly, and an electric operator that stopped responding. Both are covered below, with dedicated pages for each.
Gate Repair in Eastvale
Most Eastvale gate repair work involves sagging hinges, rusted frames, and misaligned latch posts on builder-era gates that have been in service since the tract build-out. The dry heat warps wood infill, the winter rains rust the welds, and the Santa Ana winds finish the job. We work on the brand you already have, straighten or replace the frame, reset the posts, and get the gate swinging cleanly again. For the full breakdown of what gate repair costs in Eastvale and the specific failure patterns we see here, read our complete Gate Repair in Eastvale page. Estimates are free, and the price is agreed before any work begins.
Electric Gate Repair in Eastvale
Electric gate repair in Eastvale usually means diagnosing an operator that is original to the house. These units have been cycling in 100-degree heat for over a decade, and the control boards, sensors, and motors are at the end of their service window. We are an automated gate specialist, not a general handyman, so we trace the fault at the board level instead of guessing. Fixing the actual problem, not replacing the whole system, is the point. You can read the specific symptoms, costs, and repair process on our Electric Gate Repair in Eastvale page. One call to (844) 703-6053 gets a trained technician out.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Eastvale
Gate installation in Eastvale is driven by one reality: the city’s tract-built housing stock is aging on a shared timeline, and the builder-installed gates are failing together. A new gate here is not an upgrade for most homeowners, it is the replacement of a 15-year-old steel or aluminum frame that has rusted at the base and sagged past the point of repair. The climate accelerates the decision. Eastvale’s dry 95-to-105-degree summers bake the wood infill and warp it, while winter rain creeps into hinge welds and base plates. Add the Santa Ana wind load on freestanding gates between fence lines, and a gate that was marginal last year is on the ground this spring. We install gates sized and set for those conditions, whether you need a new driveway gate, a side-yard gate, or a full automated system. Our Gate Installation service covers removal, post setting, the gate itself, and the operator when you want one. The price is quoted and agreed before any work starts.
Automatic Gate Installation
Signs you need it
The gate has to be pushed or pulled by hand because the old operator failed, or you want to stop getting out of the car at the street every time.
What it costs in Eastvale
Automatic gate installation in Eastvale typically falls between $3,900 and $11,000 depending on the gate size, operator type, and power run distance.
How we do it
We remove the old gate and operator, set new steel posts in concrete, hang the gate, mount the new operator, run the power and safety sensor wiring, and program the remotes and keypad on site.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the base or sagging so badly it drags on the concrete and no longer latches.
What it costs in Eastvale
Driveway gate installation in Eastvale runs between $2,500 and $9,000 for a single swing or sliding gate depending on width, material, and whether automation is included.
How we do it
We measure the drive opening, check for slope and drainage, remove the old gate, set properly sized posts, hang and align the new gate, and install the operator and safety edges if specified.
Sliding Gate Installation
Signs you need it
A sliding gate is the right call when the driveway slopes upward from the street, or when a swing gate would block the sidewalk or the garage approach.
What it costs in Eastvale
Sliding gate installation in Eastvale typically ranges from $4,500 to $13,000 based on gate length, track or cantilever design, and automation requirements.
How we do it
We pour the track or cantilever footing, set the receiver posts, build and hang the gate, install the operator and rack, and set the photo-eye safety sensors to code.
What Gate Installation Costs in Eastvale
| Item | Typical range in Eastvale |
|---|---|
| Gate installation (basic single swing, no operator) | $2,500 – $6,500 |
| Automatic gate installation (operator, wiring, safety) | $3,900 – $11,000 |
| Driveway gate installation (double swing or slide) | $4,500 – $13,000 |
What pushes Eastvale pricing up: long power runs from the panel to the gate operator, double swing gates instead of single, and steel gates with heavier infill. What keeps it controlled: most Eastvale yards are flat, and most gates are assembled from modular sections rather than custom fabricated iron. The price is always quoted and agreed before any work starts, and estimates are free.
How much does gate installation cost in Eastvale?
Gate installation in Eastvale typically costs between $2,500 and $13,000 depending on gate type, size, material, and whether you’re adding an operator and safety sensors. A simple side-yard gate runs at the low end, while an automated sliding driveway gate lands at the top. Call (844) 703-6053 for an exact quote, and the estimate is free.
Does Manor Gate Repair handle the electrical and concrete work for gate installation?
Yes. We set the posts in concrete, run the power and low-voltage wiring to the operator, connect the safety photo-eyes and keypad, and program the remotes. You are not coordinating an electrician, a concrete sub, and a gate company. It is one crew from diagnosis to installation.
Brands We Service in Eastvale
We work on the brand you already have. In Eastvale we commonly see DoorKing and LiftMaster operators on driveway gates, and Mighty Mule controlling the side-yard gates off the 15 corridor tracts. Parts are stocked locally, and most board or sensor replacements are done in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Eastvale, CA
| Service | Typical range in Eastvale |
|---|---|
| Gate hinge replacement | $180 – $450 |
| Gate frame straightening | $250 – $600 |
| Gate post reset | $350 – $800 |
| Gate opener circuit board repair | $280 – $650 |
| Gate opener replacement | $700 – $1,900 |
| Safety sensor replacement | $150 – $400 |
| Automatic gate installation | $3,900 – $11,000 |
| Sliding gate installation | $4,500 – $13,000 |
Eastvale pricing runs toward the middle of those ranges. The two biggest cost drivers here are rusted base plates that require cutting out the old post and re-pouring the footing, and the long power runs common on larger lots off the 15 corridor. Whatever the job, the price is quoted and agreed before any work starts, and there is no surprise invoice at the end.
Neighborhoods We Serve in Eastvale
We cover all of Eastvale, 92860, including the tract communities on both sides of the 15. Most of our work is in the neighborhoods built from the mid-2000s through the 2010s, where the builder-grade gate hardware is now reaching failure together.
- Eastvale Gateway area
- Neighborhoods off Scholar Way
- Tracts east of Hamner Avenue
- Communities off Limonite Avenue
- Side-yard gate rows in the Citrus Valley tracts
We schedule Eastvale service calls in a single daily route, so response is typically same-week, with emergency repair availability for gates that cannot be secured.
Service Area – Cities Near Eastvale
Manor Gate Repair is based in Fontana and covers Eastvale plus the surrounding Inland Empire cities. If you are in a neighboring area, our Norco, CA page covers the hillside lots and horse properties, while Home Gardens, CA is covered for the smaller post-war lots just east of Eastvale. Corona, CA work runs along the 15 corridor, and Jurupa Valley, CA rounds out the service area to the north. Call (844) 703-6053 to confirm your street.
Serving Eastvale, CA — Our Local Coverage Area
We’re based in the Eastvale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Eastvale
We schedule Eastvale calls on a dedicated route, so repair work is usually booked within one to three business days. If a gate is stuck open or cannot be secured, we treat that as an emergency and move it up. Call (844) 703-6053 in the morning for the best chance of a same-week visit.
Some Eastvale HOA communities require design review for any exterior change, including gate style, color, and height. We recommend checking your HOA’s architectural guidelines before scheduling replacement. We can build to the approved spec once you have it, and we will match the existing builder gate when approval requires it.
Yes. We work with property managers and owners of single-family rentals throughout Eastvale. Electric gate repair and replacement on a rental is handled as a safety item, which means getting the gate secured and functional is the priority. Estimates are free, and property managers get a written scope before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Eastvale Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Riya Mehta"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Megan Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer