Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Crestline, CA
Gate installation in Crestline means working with steep grades, decomposed granite soil, and pine roots that push posts out of alignment within a few hard winters. We’re Manor Gate Repair, and we install driveway gates, automatic operators, and electric access systems that stay square on mountain terrain. We handle everything from the first site walk to the final control-board programming, and we work on the brand you already have, whether that’s LiftMaster, DoorKing, or Mighty Mule. Call (844) 703-6053 for a free measure and written quote.
Why Crestline Homes Are Different
Crestline sits at 4,600 feet in the San Bernardino Mountains, and the housing stock reflects it. Most homes are older mountain cabins from the 1960s through the 1980s, redwood or pine-sided, many on concrete pier-and-beam foundations that shift as the slope moves. Gate posts here are often anchored into rock or rebar-reinforced concrete, which sounds sturdy until a hard freeze heaves the footing and the gate starts dragging by mid-January.
Winter brings snow loads and heavy moisture that swell wooden gates and rust wrought-iron hinges. Summer dry heat and Santa Ana winds do the opposite, warping panels and racking the frame just enough that the latch no longer lines up. We also see properties where pine roots have lifted one post an inch or more after snowmelt, a problem that doesn’t exist in valley cities like San Bernardino. Cal Fire’s 100-foot defensible-space clearance adds another layer: older manual gates often need retrofitting so emergency access workers can get in without a key from the property owner. Crestline gate work is its own trade, and we treat it that way.
Styles & brands we work with
Our Main Crestline Services
Two services account for most of the calls we take in the 92325 ZIP. Both have dedicated Crestline pages, so follow the link for the full detail on the one that matches your situation.
Gate Repair in Crestline
Repair work in Crestline usually starts with a gate that won’t close, drags against the ground, or has a post that’s drifted out of plumb. We realign posts, replace rusted hinges, fix latch strikes, and correct swing and slide geometry. For the full repair scope, pricing detail, and same-day service notes, see our dedicated page: Gate Repair in Crestline.
Electric Gate Repair in Crestline
When the operator hums but the gate doesn’t move, or the keypad goes dead after a storm, the fault is usually in the control board, a limit switch, or a moisture-compromised sensor. Crestline’s freeze-thaw cycles are hard on outdoor electronics. We diagnose across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Detailed guidance is on the dedicated page: Electric Gate Repair in Crestline.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Crestline
Gate installation in Crestline typically runs between $1,900 and $9,500 depending on whether you’re adding a manual driveway gate or a fully automated electric system with sensors, keypads, and battery backup. The mountain terrain drives most of the difference: rock excavation, deeper footings, and slope work all add labor hours. We’re not the cheapest in town, and that’s intentional. Our job is to install a gate that stays square through Crestline winters, not one that needs re-shimming every spring. From diagnosis to installation, our team handles the full Gate Installation process: site assessment, footing work, post setting, gate fabrication or assembly, operator installation, and final programming.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open a manual gate, or your current automatic gate is unreliable enough that you’ve stopped trusting it to close behind you.
What it costs in Crestline
Automatic gate installation in Crestline typically runs $4,600 to $9,500 with a full operator kit, safety edges, and control wiring.
How we do it
We set the posts on reinforced footings, mount the operator, run the power and control lines, install safety edges and photo sensors, then program and test the full open-close cycle.
Driveway Gate Installation
Signs you need it
Your driveway is unsecured or blocked by an old gate that no longer meets defensible-space clearance and can’t be operated quickly in an emergency.
What it costs in Crestline
Driveway gate installation in Crestline typically runs $2,700 to $7,000 for the gate, posts, hinges, and either a manual latch or a basic operator.
How we do it
After checking slope and clearance, we excavate for footings, set posts in concrete, hang the gate, adjust swing or slide geometry, and install the operator if the job calls for automation.
Sliding Gate Installation
Signs you need it
Your driveway is steep or short on swing clearance, and a swing gate would drag or block the road when open.
What it costs in Crestline
Sliding gate installation in Crestline typically runs $2,900 to $7,500 depending on gate width, track work, and the operator type.
How we do it
We pour a level track bed, set the receiver post, install the track and rollers, hang the gate, and tune the slide path so it travels smoothly without binding.
What Gate Installation Costs in Crestline
| Item | Typical range in Crestline |
|---|---|
| Automatic gate installation | $4,600 – $9,500 |
| Driveway gate installation | $2,700 – $7,000 |
| Sliding gate installation | $2,900 – $7,500 |
Do I need a permit for a new gate in Crestline?
Automatic gates generally require permit review, and Crestline’s fire-safe clearance rules often come into play. We confirm permit needs during the site measure and guide the paperwork before footing work starts.
How long does a Crestline gate installation take?
Most residential installations take one to three days depending on rock excavation and operator programming. Call (844) 703-6053 for a schedule estimate after we see your lot.
Brands We Service in Crestline
We service DoorKing, Elite, Mighty Mule, and LiftMaster systems in Crestline, among others. When a part isn’t on the truck, we source it from our local supplier network rather than pushing a full-system replacement. Most board and sensor replacements are back in service within the week. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Crestline, CA
| Service | Typical range in Crestline |
|---|---|
| Automatic gate installation | $4,600 – $9,500 |
| Driveway gate installation | $2,700 – $7,000 |
| Sliding gate installation | $2,900 – $7,500 |
| Gate repair (general) | $175 – $1,200 |
| Electric gate repair | $350 – $2,800 |
| Gate operator replacement | $900 – $2,600 |
| Control board repair or replacement | $400 – $1,500 |
| Safety sensor or photo eye repair | $200 – $650 |
| Keypad or intercom repair | $250 – $900 |
| Hinge or weld repair | $180 – $750 |
| Post reset or realignment | $450 – $1,800 |
| Track or roller replacement | $300 – $1,100 |
In Crestline, two things push prices up: rock excavation for new footings and the extra labor of leveling posts on a graded slope. We quote every job before work starts and the price you sign is the price you pay.
Neighborhoods We Serve in Crestline
We cover all of Crestline’s 92325 ZIP, from the lake-adjacent streets up to the higher ridgeline lots. Here are a few of the areas where we’ve done recent gate work:
- Lake Gregory area
- Valley of Enchantment
- Cedar Pines Park
- Skyland
- Twin Peaks
For repair calls in the area, we typically schedule within the same week, with priority for gates that won’t close or secure the property.
Service Area – Cities Near Crestline
In addition to Crestline, we serve the nearby mountain and valley communities. On the mountain side, Lake Arrowhead, CA has similar terrain and the same frost-heave issues we see in Crestline. Down the hill, San Bernardino, CA, Highland, CA, and Muscoy, CA have flatter lots, but the gate and operator work is the same trade.
Serving Crestline, CA — Our Local Coverage Area
We’re based in the Crestline area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Crestline
For a gate that won’t close or won’t secure, we typically schedule within a few business days, with priority for full failures. Installations are measured and scheduled, not same-day, since footing work and operator programming can’t be rushed.
Some Crestline neighborhoods and HOAs have design standards for gate height, material, and operator visibility. We review these with you during the measure and adjust the gate design before we quote, so the finished install passes review.
We work in Crestline all year. Deep snow slows excavation and footing work, but mechanical and electrical repair on an existing gate can usually proceed regardless of the weather.
Call Manor Gate Repair at (844) 703-6053 for a free estimate on any gate project in Crestline. We’ll come out, look at the slope, soil, and existing hardware, and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Crestline Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Megan Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Tracy Mercer"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniel Thompson