Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Fontana Homeowners
Gate Installation in Fontana costs between $2,800 and $9,500 for most residential properties, depending on the gate type, operator system, and site preparation required. A standard single swing driveway gate with a basic opener typically starts around $2,800, while a custom sliding gate with a heavy-duty LiftMaster or DoorKing operator can reach $9,500 or more for wider driveways and reinforced track work. Manor Gate Repair has been installing gates across Fontana, Bloomington, and Rialto for years, and we quote every job up front so you know the full price before any work begins. Call (844) 703-6053 for a free on-site estimate.
Automatic Gate Installation
Automatic Gate Installation means outfitting a gate with a motorized operator, safety sensors, and access controls so it opens and closes without you leaving the vehicle. You need it when a manual gate becomes a daily annoyance, when you want controlled access to a long driveway, or when security footage shows unwanted vehicles pulling onto your property. In Fontana, where many homes sit on larger lots in neighborhoods like Hunter’s Ridge and West End, automatic gates are a practical upgrade rather than a luxury. Manor Gate Repair handles the full automatic gate installation from the post and hinge work to wiring the operator, programming remotes, and tuning the force settings to the specific weight and travel of your gate. Costs for automatic gate installation in Fontana run $1,200 to $4,800 for the operator and controls when paired with a new or existing gate. We work on the brand you already have, and we never push a full-system replacement when a component-level fix is the right call.
Operator Selection and Sizing
Choosing the correct operator means matching motor torque and duty cycle to the gate’s weight, length, and expected daily cycles. A wrong-sized operator fails early, typically within the first two years. We calculate gate weight and wind load before we recommend an operator, so you do not pay for an undersized unit that will struggle or an oversized one that wastes energy and budget.
Safety Sensor Compliance
Every automatic gate installation we complete in Fontana includes photo eyes or edge sensors positioned to detect obstructions during travel. This is not optional equipment; it is what prevents the gate from closing on a vehicle, a child, or a pet. We test the reverse function under load before we call the job done.
Styles & brands we work with
Gate Installation Services
Gate Installation Services cover the complete scope of putting in a new gate: site assessment, post setting, gate fabrication or assembly, hinge and roller alignment, operator mounting, and final tuning. You need this when a gate has rusted past repair, when you have purchased a property without a gate, or when your current gate no longer matches the security needs of the property. Manor Gate Repair in Fontana provides gate installation services that start with a free measured site visit so the quoted price reflects your actual driveway width, slope, and material choices, not a generic estimate. A basic chain-link or aluminum single swing gate installation in Fontana runs $2,800 to $4,500, while ornamental iron and custom steel gates run $5,000 to $9,500 depending on size and finish. From diagnosis to installation, one crew handles the concrete, the steel, the wiring, and the programming.
Site Assessment and Measurements
We measure driveway width, grade changes, and clearance zones before recommending any gate configuration. A driveway that slopes toward the street changes how a swing gate must be hung. A driveway with limited side clearance points toward a sliding gate instead of a swing setup. Getting these measurements right on day one prevents expensive rework later.
Material and Style Recommendations
Fontana’s sun and occasional Santa Ana winds mean not every gate material ages well here. Powder-coated steel and aluminum hold up better than raw iron in this climate. We recommend materials and finishes based on how they will look after five years of Inland Empire summers, not just on the showroom floor.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation refers to installing a gate that is powered by an electric motor and control system, wired either to your home’s electrical panel or to a solar power source. You need this when you want a gate that integrates with intercoms, keypads, or vehicle detection loops rather than one that requires manual operation. In Fontana, electric gate installation is common for properties with long driveways or for homeowners who want to screen visitors before they reach the front door. Manor Gate Repair specializes in electric gate installation for LiftMaster, DoorKing, and Elite systems, and our technicians are trained to diagnose control boards and sensors at the component level, not just swap out whole assemblies. Costs for electric gate installation in Fontana run $3,400 to $8,500 when you include the operator, control board, safety devices, and the electrical run from the panel to the gate.
Control Board and Accessories
The control board is the brain of an electric gate, and the quality of that board determines how reliably the gate responds to remotes, keypads, and loop detectors. We install boards with surge protection as standard, which matters in Fontana because electrical storms and utility fluctuations can fry unprotected boards. We also wire in battery backup so the gate remains operable during a power outage.
Electrical Run and Conduit Work
Running power to a gate that sits 100 feet from the house requires proper conduit depth, wire gauge, and weatherproof junction boxes. We trench, lay conduit, pull wire, and connect to a dedicated breaker when local code requires it. The price we quote includes this electrical work, not a vague allowance that gets revised upward after the trench is open.
Driveway Gate Installation
Driveway Gate Installation is the process of mounting a gate across the vehicle entrance to your property, anchored to posts or a track system that keeps it stable through years of daily use. You need this when street traffic or unwanted visitors make an open driveway feel like a vulnerability, or when a property you manage needs controlled access for tenants and visitors. Manor Gate Repair installs driveway gates across Fontana, from single-car residential driveways in Sunnyslope to wider estate entrances that require custom-width fabricated steel. A standard single driveway gate installation in Fontana costs $2,800 to $5,200, and a double-leaf ornamental driveway gate with automation runs $5,500 to $9,500. Your gate, restored to spec, starts with an accurate measurement of your driveway and a written quote you approve before we cut any steel or pour any concrete.
Post Setting and Foundations
Gate posts carry the full weight of the gate plus the force of every open and close cycle, so their foundation matters more than the gate itself. We dig and pour concrete footings sized to the gate weight and gate type, using deeper footings on loose or sandy soil. A post that shifts a half inch will cause the gate to sag and drag within a year.
Hinge and Hardware Specification
For driveway gates, the hinge hardware determines whether the gate stays smooth and quiet or starts groaning and binding. We use sealed bearing hinges and adjustable hinge plates on swing gates, and proper roller assemblies and guide wheels on sliding gates. These components are specified for the gate’s actual weight, not whatever came in the box.
Sliding Gate Installation
Sliding Gate Installation is the installation of a gate that travels horizontally along a track or cantilever system rather than swinging open on hinges. You need this when your driveway has a steep slope, limited swing clearance, or a wide opening that would put too much leverage on hinge posts. In Fontana, sliding gate installation is common on industrial-look residential properties and on driveways that intersect busy streets where a swinging gate would block the road during operation. Manor Gate Repair installs sliding gates with cantilever or track-ride designs depending on your site conditions, and we can automate them with DoorKing, Elite, or Mighty Mule operators. Sliding gate installation in Fontana typically costs $4,000 to $9,500, with the higher end reflecting wider openings, heavier fabricated steel, and full automation with safety edges.
Track vs. Cantilever Design
A track-ride sliding gate rolls on wheels along a ground track, which works well on hardscape that is already level and solid. A cantilever sliding gate rides above the ground on offset rollers and posts, so it does not need a clean track and does not jam when grass, leaves, or gravel build up along the fence line. We evaluate your existing ground conditions before recommending one system over the other.
Slope and Clearance Requirements
Sliding gates need a straight, unobstructed run of space beside the driveway that is at least one and a half times the gate opening width. If you do not have that, a swing configuration is almost always the better choice. We catch this during the measured site visit and will tell you plainly if a sliding gate is the wrong fit for your property.
Gate Opener Installation
Gate Opener Installation is the mounting and programming of a motorized operator onto an existing or new gate so the gate can be controlled by remote, keypad, intercom, or phone app. You need this when your current opener has failed and cannot be economically repaired, when you have upgraded to a heavier gate that the old operator cannot move, or when you want to add smartphone control to a gate that currently only works with a physical key. Manor Gate Repair installs gate openers from LiftMaster, DoorKing, Elite, and Mighty Mule, and our technicians are brand-agnostic, meaning we recommend the opener that matches your gate and usage pattern instead of the one we happen to sell. Gate opener installation in Fontana runs $900 to $3,200 for the opener unit and installation labor, with the high end covering heavy-duty operators with battery backup and multiple access control options.
Access Control Options
Your gate opener is only as useful as the ways you can activate it. We install and program remotes, wireless keypads, intercom systems, and vehicle exit sensors so the gate opens the way you want it to open. For property managers, we can also set up multiple user codes and audit who opened the gate and when.
When Repair Makes More Sense
We will tell you if the existing opener can be saved with a replacement control board or a new limit switch, because that is often the right fix rather than a full replacement. The right fix, not the easy upsell, has been our standard on hundreds of diagnostic calls across Fontana. If the opener is truly at end of life, we quote the replacement honestly and install it the same week.
Gate Fabrication
Gate Fabrication is the custom building of a gate to fit your specific opening dimensions, material preferences, and security requirements rather than installing an off-the-shelf unit. You need this when your driveway is wider or taller than standard, when you want a specific design that matches your existing fence or architecture, or when an off-the-shelf gate would require expensive site modifications to fit. Manor Gate Repair arranges gate fabrication for Fontana homeowners through our network of steel and aluminum fabricators who build to our specifications, and we handle the installation, automation, and final alignment in-house. Custom gate fabrication in Fontana runs $3,500 to $9,500 depending on size, material, and design complexity, with intricate ornamental work and heavier gauge steel at the upper end.
Custom Widths and Heights
Standard gate panels work for standard openings, and nothing about an older Fontana property is guaranteed to be standard. We measure the actual opening, including any variances in width from top to bottom, and order or fabricate a gate that fits without unsightly filler panels or excessive bottom clearance. A gate built to your measurements also runs quieter and lasts longer because it is not fighting the limits of a template size.
Material and Finish Choices
We can source fabricated gates in steel, aluminum, or a combination, with finishes from industrial powder coat to wood-textured composite infill. The material choice affects more than appearance; steel adds weight and durability, while aluminum resists corrosion better in Fontana’s dry heat and occasional heavy rain. We will walk through the tradeoffs before you commit to a fabrication order.
Brands We Service
We work on the brand you already have. Manor Gate Repair installs and services DoorKing operators, which are common on Fontana residential and light-commercial gates that need reliable swing and slide operation. DoorKing units are known for their straightforward control boards and long service life, and we stock their common replacement parts locally so repairs do not stall waiting on a shipment.
LiftMaster gate openers are another brand we install frequently, and we are familiar with their AC and DC operators as well as their myQ integration for smartphone control. Elite and Mighty Mule round out the residential side of our brand coverage, with Elite serving heavier-duty applications and Mighty Mule common on lighter driveway gates. Whether you have DoorKing, LiftMaster, Elite, Mighty Mule, or any other make, we can diagnose and service the system without pressuring you into a full replacement.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Gate drags or scrapes along the ground. This usually means a failing hinge, a bent frame, or a shifted post. Left unaddressed, the drag gets worse and puts strain on the operator until it burns out completely. A professional alignment and hardware check costs far less than waiting for the motor to fail.
- Opener runs but the gate barely moves. This points to a slipping clutch, a failing capacitor, or an operator that was always undersized for the gate’s weight. Continued use under this strain will destroy the motor windings. We can measure the gate’s true weight and tell you whether the operator is salvageable.
- Gate reverses mid-travel for no clear reason. Safety sensors that are misaligned or failing will cause false reversals, but so will a binding roller or a warped track. This is frustrating for you and unsafe for anyone using the driveway. A professional diagnostic isolates the actual cause instead of guessing.
- You can hear the operator humming but the gate does not open. A humming motor with no movement often means a broken capacitor or a stripped gear. This is a repairable failure if caught early and a full operator replacement if ignored until the motor overheats. Either way, it needs a technician’s attention this week.
- Keypad or remote works intermittently. Intermittent access control failures usually trace to a failing receiver board, loose antenna wiring, or a low-voltage issue at the control panel. The danger is being locked out or locked in when the intermittent failure becomes permanent. We test the signal path from the remote all the way to the operator to find the actual fault.
Our Process, Step by Step
- 1
Measured Site Visit. We come to your Fontana property, measure the driveway width, check the grade, inspect the existing posts or track if present, and discuss how you want to use the gate. This visit is free and comes with a written quote. You approve the price before anything is ordered or installed.
- 2
Material and Hardware Selection. Based on the measurements and your preferences, we recommend the gate material, operator brand, and access control setup that fits the job. We explain the tradeoffs in plain terms, including why a certain operator suits a heavy steel gate while another is fine for a lighter aluminum one.
- 3
Site Preparation and Post Setting. We dig footings to the required depth for your soil and gate weight, set posts or rail foundations, and pour concrete. For electric and automatic gates, we trench and lay conduit for the power run during this phase. Everything is done to Fontana’s local building code requirements.
- 4
Gate Installation and Automation. We mount the gate, align hinges or rollers, install the operator and safety sensors, and run the wiring to the control panel. We then program remotes, keypads, and any smartphone controls you requested. Force settings are tuned to the specific gate so it opens and closes smoothly without slamming.
- 5
Testing and Walkthrough. Before we leave, we test the gate through at least twenty full open-close cycles, verify the safety reverse function under load, and show you how to operate and maintain the system. You get a clear rundown of what was installed, how it works, and when to call us for maintenance. The job is not done until you have told us it works the way you expected.
How Much Does Gate Installation Cost in Fontana?
A typical gate installation in Fontana runs $2,800 to $9,500 depending on the gate type, size, material, and whether you are adding automation; see our Gate Installation pricing page for a detailed breakdown. A basic single swing gate with a manual latch sits at the low end around $2,800 to $3,500. A double driveway gate with a LiftMaster or DoorKing operator, safety sensors, and a keypad runs $5,500 to $7,500. A custom fabricated sliding gate on a wider driveway with a heavy-duty operator and intercom access can reach $8,500 to $9,500. The price you pay is affected by the width of your opening, the condition of the ground where posts or track must be set, the electrical distance from your panel to the gate, and the finish level of the gate material. To avoid overpaying, get a measured on-site quote rather than a phone estimate, because gate pricing built on guesses about your driveway width will always be wrong in one direction or the other. Our free estimate includes the measurements, the operator recommendation, the electrical scope, and a written price you approve before we start. Call (844) 703-6053 to schedule yours.
Our Service Area Near Fontana
Manor Gate Repair installs gates throughout Fontana and the surrounding Inland Empire communities. We regularly serve Gate Installation in Bloomington, Gate Installation in Rialto, and the neighborhoods of Sunnyslope, Glen Avon, and Muscoy. We also take jobs in Rubidoux, Colton, Highgrove, Grand Terrace, Jurupa Valley, and San Bernardino. If your property is within a half hour of Fontana, we can likely schedule your measured site visit this week.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Fontana
Gate installation is the complete process of mounting a new gate across a driveway or pedestrian entrance, including post setting, gate hanging, hardware alignment, and optionally wiring an automatic operator. It includes site measurement, foundation work, and final tuning so the gate opens and closes correctly under its own weight. A professional installation also includes safety sensor setup when the gate is automated.
Most residential gate installations in Fontana take one to two working days from start to finish. Sliding gate installations and custom fabricated gates can take three to five days when concrete footings need curing time before the gate can be mounted. Automatic gate installation adds a few hours for wiring, programming, and safety testing. We give you a clear timeline during the free measured site visit.
Gate installation in Fontana costs $2,800 to $9,500 for most residential projects. A basic single swing gate starts around $2,800, a double automated driveway gate runs $5,500 to $7,500, and a custom sliding gate with full automation can reach $9,500. The price includes materials, labor, post setting, and automation when requested. Call (844) 703-6053 for an exact quote based on your driveway, because every property measures differently.
Yes, we install and service both DoorKing and LiftMaster gate operators, along with Elite and Mighty Mule. We are brand-agnostic, which means we recommend the operator that matches your gate’s weight, usage, and access control needs, not the brand we stock most heavily. If you already have a DoorKing or LiftMaster system, we can integrate a new gate with the existing operator when it makes sense to do so.
We prioritize urgent security issues such as a gate that will not close and leaves your property open, or an operator that has failed and locked a vehicle inside. For true emergency repairs on existing gates, call (844) 703-6053 and we will schedule the earliest available technician visit. New gate installation is a scheduled service that includes measurement and material ordering, so we quote a timeline during the site visit rather than promising same-day installation on new work.
Operator manufacturers such as DoorKing, LiftMaster, Elite, and Mighty Mule provide their own product warranties on motors and control boards, and we register those warranties for you at installation. Our workmanship is backed by a labor warranty covering the installation itself. We explain the exact warranty terms for your specific equipment before you sign the estimate, because every manufacturer’s terms are different.
Clear vehicles and stored items from the driveway area at least one full day before the scheduled installation. If an existing gate and operator are being removed, the old equipment does not need moved by you; we handle removal and disposal as part of the job. Mark any underground utilities or irrigation lines near the gate posts so we can avoid them during excavation. We will confirm all of this when we schedule your install date.
Schedule Your Gate Installation Service in Fontana Today
If you are ready for a new gate on your Fontana property, call Manor Gate Repair at (844) 703-6053. We will schedule a free measured site visit, give you a written quote with no obligation, and walk you through the right gate and operator for your property. We look forward to hearing from you.
Written by Nelson Pryce, Owner at Manor Gate Repair, serving Fontana and the surrounding Inland Empire.